White Limestone Flexible Stone
White Limestone is a flexible stone in the Limestone and Natural Stone series, with a light ash gray tone and natural limestone stratification. It is mainly used for wall surfaces in commercial spaces such as hotels, restaurants, commercial stores, exhibition halls, etc. This page provides specifications and packaging parameters, material and performance, construction methods and acceptance points, as well as applicable scenarios and selection suggestions; it supports free samples and bulk quotation for engineering, and can provide inspection reports.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.3-2.8 | 2.5-2.8 | 330 | 237.6 | 680×1280×1100 | 900 |
| 1200×3000 | 2.3-2.8 | 15-15.5 | 80 | 288 | 1280×3100×600 | 1200 |
Optional colors:Grey, white, black (other colors customizable)
Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.
White Slate Flexible StoneIt is an architectural wall decoration material from the IGOODS Slate & Natural Mountain Stone series. The product uses light white-gray as its main visual tone and combines natural slate layering, irregular fine lines, and slight concave-convex texture. It is suitable for commercial projects such as hotels, restaurants, retail stores, and showrooms that have requirements for wall material texture and overall spatial consistency.
IGOODS provides white slate flexible stone and related wall material solutions. Common specifications of flexible stone include 600×200mm, 1200×2400mm and 1200×3000mm, with common thicknesses of 3–6mm and weight of approximately 3–7kg/㎡; differences exist among different textures and thicknesses, and 20×30cm physical samples are supported. The product is mainly used for architectural wall decoration and is not recommended as a floor paving material; specific combustion performance, radioactivity and other engineering technical performance are subject to the valid test reports of the corresponding products.
What is White Slate Flexible Stone?
White Slate Flexible Stone is a flexible wall decoration material whose main design feature is the visual language of slate.
Unlike stone effects that emphasize strong color contrast and exaggerated veining, white slate leans more toward a low-saturation, natural and restrained spatial expression. It is suitable as a basic wall material in commercial spaces, combined with wood veneer, metal, glass and lighting of different color temperatures.
Flexible stone has the material characteristics of being lightweight, thin and having a certain degree of flexibility. In commercial wall projects, it can provide designers, decoration companies and engineering units with another material selection method different from traditional heavy and thick facing materials.
Actual photographed texture features of White Slate
As seen in the actual product photo, this White Slate is overallLight white-gray tone, there is no obvious large-area variation of light and dark patches.
The surface has natural, irregular slate-like lines, and in some areas fine cracks and slight undulations forming layers can be seen. The texture does not use a strongly regular arrangement but maintains a relatively random natural stone appearance.
From the overall effect, this texture is more suitable for commercial spaces that need a clean, natural and quiet material background, rather than design directions that rely on high-contrast stone veins to form a strong visual center.
White Slate Flexible Stone Specifications and Parameters
| Project | Parameter description |
|---|---|
| Product name | White Slate Flexible Stone |
| Brand | IGOODS |
| Product category | Flexible Stone |
| Series | Slate and natural mountain stone |
| Common specifications | 600×200mm、1200×2400mm、1200×3000mm |
| Common thickness | 3–6mm |
| Weight | Approx. 3–7 kg/㎡, varying with different textures and thicknesses |
| Sample specifications | 20×30cm |
| Product standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Combustion performance | The specific grade shall be subject to the valid test report of the current product model. |
| Application Location | Building wall decoration |
Material and performance parameters
What determines the scope of application of flexible stone is its substrate composition and physical performance. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, and no wood substrate is used, so there is no hidden risk of formaldehyde release. The material is lightweight and flexible, can be bent, and is not prone to cracking or deformation; it also has comprehensive performance including flame retardancy, moisture resistance, stain resistance and UV resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges for flexible stone as a category of material. For the acceptance of white slate flexible stone in a specific project, the valid test reports for the selected model, the provisions of the supply contract, and the relevant standards of the project location shall govern.
Key installation and construction points
No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.
Substrate treatment
Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.
Measurement and layout
At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.
Cutting and hole drilling
Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces is White Slate suitable for?
Hotel public spaces
The light color base of White Slate is relatively suitable for hotel lobbies, corridors, rest areas and other public space walls. Compared with stone textures that are visually too complex, this relatively restrained slate texture can serve as a spatial background and form a clearer layered relationship with lighting, furniture and soft furnishings.
Dining area and café
In dining spaces, white slate can be combined with natural wood, dark metal, glass and warm lighting. The natural stone texture can add material quality to the wall without creating excessive visual interference.
Tea spaces and clubs
For spaces emphasizing natural materials, negative space, and a quiet atmosphere, light-colored slate can be used as a continuous wall material. Fine, irregular layering can form material details when observed up close, while maintaining a unified overall wall appearance from a greater distance.
Commercial storefronts and showrooms
Commercial storefronts and showrooms usually require walls to strike a balance between serving as a spatial backdrop and displaying products. White slate has a relatively neutral overall color and can be used as a material choice for display walls, public walls and select feature walls.
What product features does White Slate have?
- Light-colored natural stone visual:The surface is mainly light white-gray and can be combined with a variety of commercial space design styles.
- Natural slate texture:The texture shows irregular bedding and fine lines, avoiding an overly regular artificial arrangement.
- Lightweight:IGOODS flexible stone is commonly 3-6mm thick, suitable for architectural wall decoration applications.
- Relatively light in weight:Common weight is about 3–7kg/㎡, varying according to texture and thickness.
- Has a certain flexibility:Flexible stone itself has bendable characteristics; for specific curved surface projects, confirmation is needed in combination with the specific model of white slate, the substrate, and construction conditions.
- Suitable for large-area walls:1200×2400mm and 1200×3000mm specifications are conducive to large area wall layout in commercial spaces.
What is the difference between White Slate Flexible Stone and natural slate?
Flexible stone and natural slate are different types of materials, and it is not advisable to simply understand one as completely replacing the other.
Natural slate has the structure and texture of natural mineral materials themselves, and has its value in projects that emphasize natural stone properties. White slate flexible stone, on the other hand, emphasizes lightness, wall construction organization, and the design adaptability brought by flexible materials.
When selecting materials for a project, consider the design effect, substrate conditions, material weight, transport method, installation system, project budget, and specific use environment, rather than deciding based only on material appearance.
What should be noted in the installation and material selection of White Slate?
Flexible stone wall construction usually includes:
- Substrate inspection
- On-site measurement and layout
- Material cutting
- Material bonding
- Compaction and position adjustment
- Corner and edge finishing treatment
The specific construction plan needs to be determined based on the substrate type, wall dimensions, usage environment and project design requirements. The adhesive type, quantity and specific construction parameters shall be confirmed according to the actual product system and engineering conditions.
If the project involves curved walls, columns, or other irregular structures, it is recommended to verify through physical samples and on-site conditions before formal construction. Do not judge solely based on the attribute of "flexible material" that all curved surfaces can be directly constructed.
How to choose a manufacturer of White Slate Flexible Stone?
When choosing a flexible stone manufacturer for B2B engineering procurement, it is not recommended to compare only single samples or single prices.
Designers, decoration companies, engineering contractors and building material buyers need to focus more on whether the product system is complete, whether samples and batch materials have a stable visual direction, whether different specifications can coordinate with the project layout, and whether the manufacturer can provide project material selection, sample confirmation and engineering application support.
IGOODS is positioned as a wall space material solution provider, flexible stone is one of its core product systems, and it can provide material selection, physical samples, design coordination, and engineering project support for architectural designers, decoration companies, engineering clients, and building materials channel customers.
White Slate Flexible Stone FAQ
What material is White Slate?
White Slate is a flexible stone wall product in the IGOODS Slate and Natural Mountain Stone series. Its main visual features are a light white-gray color and natural slate bedding, and it is mainly used for architectural wall decoration.
What are the common specifications of White Slate Flexible Stone?
The common specifications of IGOODS flexible stone include 600×200mm, 1200×2400mm and 1200×3000mm. The specific specifications available need to be confirmed according to the current product model and project requirements.
How thick is White Slate generally?
The common thickness of IGOODS flexible stone is 3–6mm. The thickness of specific white slate products should be determined by the final selected model.
What is the weight of White Slate Flexible Stone?
IGOODS flexible stone commonly weighs about 3–7 kg/㎡; there are differences in texture, specification, and thickness.
Can we first apply for white slate samples?
Yes. IGOODS can provide 20×30cm physical samples for design material selection, texture confirmation and project material evaluation.
Is White Slate suitable for hotels and commercial spaces?
Its light white-gray tone and natural slate texture are suitable for walls in commercial spaces such as hotels, restaurants, tea spaces, retail stores, and showrooms. Specific material selection should still be determined in conjunction with the space design and project usage conditions.
Can White Slate be used on curved surfaces?
Flexible stone has a certain degree of flexibility, but the specific curved surface conditions that the current white slate can adapt to need to be confirmed in combination with the product model, substrate and construction method; no specific bending radius is fixedly promoted.
Can White Slate be used for flooring?
Not recommended as a floor paving material; this product is positioned as an architectural wall decorative material.
About IGOODS
IGOODS is a wall space material solution provider, and flexible stone is one of its core product systems. Serving architectural designers, decoration companies, commercial decoration companies, engineering contractors, building materials foreign trade companies and building materials channel customers, it can provide product selection, physical samples, design coordination and engineering project support.
For projects such as hotels, restaurants, commercial stores and showrooms, it is recommended to confirm actual product samples, specifications, texture direction and the testing documents required for the corresponding project before formal bulk procurement, and then determine the final material solution.
White Limestone Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.