Coffee and Tea Drinks

Contains the IGOODS case of AIGUOSI in coffee and tea drink stores, subdivided by storefront, bar, and background wall. The page describes two key differences in the wall of the coffee shop: the storefront belongs to a semi-outdoor interface and needs to use weather-resistant adhesive and waterproof finishing; the surrounding area of the bar is long-term in milk stains and steam, which requires a dense surface; and provides verifiable control points: the flatness of the base layer is ≤3mm gap with a 2m ruler, combustion performance is graded according to GB 8624-2012, and indoor environmental pollution is controlled at class II according to GB 50325-2020.

The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.

Cases implemented
7each
Covered city
5each
Involved part
Shopfront, bar, background wall
Check items on this page
6Item ·6Item basis

Case index

The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.

CaseCityMain material.Construction area
Coffee shop prints new line stone———
Real case of coffee shop shopfront and background wallHaikou CityTravertine (milky white 130 m²
Cake shop shopfront · Nan Dao Nian Hua Shi real caseXiamen CityNan Dao Nian Hua Shi (black and white88 ㎡
Coffee shop · Star and Moon Stone wall real caseQingdao CityXingyueshi (light color)60 square meters
Café decoration materials recommendation - Flexible stone———
Milk tea shop cashier desk PU stone real caseChangsha City Gray60 square meters
Dessert shop background wall · Rammed earth board real caseFoshan CityRammed earth (rammed earth board)150 square meters

When viewing these cases, it is recommended to check these 6 items.

Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.

  • The canopy belongs to a semi-outdoor interface and must use weather-resistant treatment
    The facade and eaves wall directly receive sunlight, rain, and temperature changes, and must use weather-resistant adhesive and waterproofing at the edges. Moving the indoor method to the outdoor will cause the edges to lift in a few years.
  • Milk stains and condensation around the bar
    The steam and milk stains from the coffee machine will spread to the wall near the bar. The material must withstand daily wiping, be dense and not absorb water, and avoid leaving color seepage marks.
  • The facade is the main customer acquisition interface, and the night-time performance is prioritized
    Most of the coffee shop's customer flow is converted from passing by, and the evaluation of the facade mainly occurs at night. The difference in texture produces light and dark transitions under the wall washing light, which is more important than during the day.
  • Sign, billboard, canopy fixed points should be reserved
    Fixed parts should pass through the board into the base layer, and the outline of the sign should be marked out during the layout stage to avoid the fixed points falling exactly on the board joints.
  • Storefront is small, higher precision is required for the closing.
    The canopy scale of the coffee shop is small, and the minor flaws in joints and closures are clearly visible at a close distance, and the construction accuracy requirements are higher than those of the large surface engineering.
  • The same style inside and outside can strengthen brand unification
    Using the same material as the canopy and indoor, it can reduce the types of materials, unify the brand image, and also reduce material preparation losses.

Key indicators and acceptance criteria

The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.

ProjectReference value / PracticeBased on
Canopy base levelness2m Rule inspection, gaps ≤3mm★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels
Canopy edge waterproofingWaterproof treatment is done at the eaves and edges, and the lower mouth of the board does not directly touch the ground★Project experience
Adhesive choiceOutdoor half-site use weather-resistant adhesive★Engineering experience; select according to product instructions
Bar counter wallSurface dense, milk stains and moisture can be wiped off with a wet cloth★Engineering experience; the surface density is based on the product files
Combustion performanceGraded according to GB 8624-2012, the grade is based on the detection report of the selected modelGB 8624-2012 Classification of Combustion Performance of Building Materials and Products
Indoor environmental pollutionCommercial buildings are controlled according to Class II civil buildingsGB 50325-2020 Indoor Environmental Pollution Control Standard for Civil Engineering Construction

Common problems (FAQ) of coffee and tea drinks

The following are the most frequently asked questions in the design and procurement stages of this type of project

Can the canopy of the coffee shop use the same material as the indoor one?

The material itself can be the same, but the construction method must be distinguished: the canopy is semi-outdoor, and weather-resistant adhesive and waterproofing must be used for the edges. The method does not change, only the material changes, and it will start to warp at the edges in two or three years.

How often does the canopy need to be maintained?

The canopy constructed according to the design diameter only needs regular flushing in daily life. Pay attention to the edges and sealed parts, check once for cracks or leakage traces after the rainy season.

Will the wall behind the bar be stained by coffee stains?

Materials with dense surfaces do not leak color, can be wiped clean with a wet cloth daily. Materials with high porosity are difficult to clean once they absorb color, so the density of the surface should be given priority for the bar background wall.

How long will it take to complete the renovation of the small store?

The method of avoiding the use of joists and wet work can significantly shorten the construction period, usually a few days for the wall part, depending on the area and complexity of the design.

The location of the signboard has not been determined yet, can we do the wall first?

Not recommended. The fixing parts of the signboard need to be passed through the board into the base layer, the outline needs to be marked out during the layout stage, and it is easy to pierce the board or press it into the gap after completion.

What kind of texture of the wall is suitable for a coffee shop?

Matte, a low-reflective texture is more suitable. The seats in the coffee shop are for close proximity, with a base color from a distance and details up close, shiny materials under spotlights will only form light spots.

Related pages and requests

Coffee Shop Entrance Case·Coffee Bar Counter Case·Coffee Backdrop Wall Case·Engineering case overview·Selection Guide

Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.

Contact phone number Product Catalog Free Sample
WeChat ID copied