Leisure and entertainment

Include IGOODS of AIGOS in the落地 cases in bars and entertainment venues. The page describes the judgment order of this type of space is opposite to the conventional one - first look at the reflection, then look at the color: in low light environments, spotlights are used for key lighting, and bright surface materials will reflect light spots into the eyes of guests. And give verifiable control points: the surface flatness is ≤3mm gap when measured with a 2m ruler, the position of the LED strip and the opening position of the wine shelf are synchronized to avoid the board joint, and the combustion performance is classified according to GB 8624-2012.

The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.

Cases implemented
4each
Covered city
3each
Involved part
Bar background, booth, wine rack wall
Check items on this page
7Item ·6Item basis

Case index

The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.

CaseCityMain material.Construction area
Bar wall material printed matte graniteWanzhou DistrictPrinted matte granite (dark gray)940 ㎡
Bar matte graniteJiulongpo DistrictRough surface granite (dark gray940 ㎡
Bread stone-soft ceramic flexible stoneBijie CityBread stone (golden)}860 square meters

When looking at such cases, it is recommended to check these 7 items

Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.

  • Low light environment cannot reflect
    The overall lighting of bars and clubs is low, relying on local spotlights for key lighting. Glossy materials will reflect light spots into the eyes of guests, while matte surfaces can support the background.
  • Tolerance of alcohol and cleaning agents
    The wall will come into contact with splashes of alcohol and alcohol-containing cleaning agents, and a dense, non-absorbent surface is the basic condition.
  • The junction of backlit shaping and the wall
    The backlit shelf and light strip need to be drilled and routed on the wall, and the position of the hole and the light strip should be determined together during layout, avoiding the joints.
  • Seam management of dark wall surfaces
    Dark wall surfaces will weaken the seams, but a certain misalignment is more obvious. Layout should prioritize the through seam, and the alignment of the seams should mainly refer to the object.
  • Business hours are long, wear concentrated
    High pedestrian traffic density in night business places, the walls and backrests of the booths will be rubbed repeatedly, resistance to cleaning is very important.
  • The junction between the soft package of the booth and the hard wall
    A seam is left between the soft package and the wall to avoid the two materials from directly hitting each other, the closing parts should be the same color as the main material.
  • The fixation and opening of the backlit wine shelf
    The fixing parts of the wine shelf and the lamp should also be inserted into the substrate, the opening position needs to be determined at the same time as the layout stage.

Key indicators and acceptance criteria

The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.

ProjectReference value / PracticeBased on
Substrate flatness2m Rule inspection, gaps ≤3mm★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels
Surface reflectionIn low light spaces, matte surfaces are preferred to avoid light spots formed by spotlights.★Project experience
Holes and wiringThe fixing and opening position of the light strip and the wine shelf should be determined synchronously with the layout, avoiding the gap of the plate.★Project experience
Self-weight per square meter of materialFlexible stone approximately 3-7 kg/㎡On-site product archives (by model)
Combustion performanceGraded according to GB 8624-2012, the grade is based on the detection report of the selected modelGB 8624-2012 Classification of Combustion Performance of Building Materials and Products
Indoor environmental pollutionCommercial buildings are controlled according to Class II civil buildingsGB 50325-2020 Indoor Environmental Pollution Control Standard for Civil Engineering Construction

Common Questions (FAQs) in Recreation and Entertainment

The following are the most frequently asked questions in the design and procurement stages of this type of project

Why must the wall of the bar be matte?

Because in low-light spaces, focus lighting is used, and the bright surface will reflect the light spot directly into the guests' eyes, which is not comfortable and looks cheap. The matte surface scatters the light, and there is more depth in the dark.

What should you do if wine spills on the wall?

Wet cloth can be used to wipe off dense materials on the surface. What needs to be paid attention to is the joints and edge parts, as wine can seep into the bonding layer along the joints and affect adhesion for a long time, so the edges must be sealed properly.

Can you see the joints on the dark wall?

Dark color can weaken the seam line, but misalignment is more obvious. Therefore, it is more important to lay the joints in a straight line, set the starting point accurately, and do not start randomly.

How do the soft package of the bar seat and the wall join?

Leave a glue seam, do not let two materials touch directly. The junction parts should be the same color as the main material, so that they will not become a visual breakpoint.

The backlit shelf needs to be opened on the wall, won't it look ugly?

During the layout stage, the position of the opening should be determined with the light strip together, then it won't be. The key is to avoid the board seam - open on the seam, the washing light will enlarge this position.

Can the curved wall of the club be done in one piece?

Yes. Flexible materials can be bent into an arc within a certain radius, and after the whole piece is wrapped, the arc surface is continuous and without dense diagonal seams; for small radii, it is recommended to try bending with a physical sample first to confirm.

Related pages and requests

Catering space case·Coffee and tea drink case·Bread stone product line·Engineering case overview·Selection Guide

Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.

Contact phone number Product Catalog Free Sample
WeChat ID copied