coffee bar
Cases of coffee bars and drink shops collected by AIGUOSI IGOODS. The page describes the background wall of the bar, which is visible to both the operation area and the customer area, and is constantly exposed to milk stains, coffee stains and water vapor, so the surface density and cleaning method are crucial. And here are the controllable points that can be checked: the flatness of the base layer is within 3mm of the gap of the 2m ruler, the technical gap between the countertop and the wall is not directly hit, the position and layout of the equipment socket and the light band are determined synchronously, and the combustion performance is classified according to GB 8624-2012.
The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.
- Cases implemented
- 2each
- Covered city
- 1each
- Involved part
- Bar background, countertop junction
- Check items on this page
- 6Item ·6Item basis
Case index
The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.
| Case | City | Main material. | Construction area |
|---|---|---|---|
| Café decoration materials recommendation - Flexible stone | — | — | — |
| Milk tea shop cashier desk PU stone real case | Changsha City | Gray | 60 square meters |
When viewing these cases, it is recommended to check these 6 items.
Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.
- The bar background is the boundary between the operation area and the customer area
This wall is seen by both the staff inside the bar and the customers outside, both perspectives must be established, and the sense of view cannot be one-sided - The long-term effect of milk stains, coffee stains and steam
The material must be wear-resistant, dense surface, not absorb water, to avoid leaving color traces - Material connection between countertop and background wall
The countertop and background wall of the bar are often made into an integrated whole, and there must be a process gap or a closing piece to transition between the two hard materials - Equipment pipelines and sockets need to be reserved
Coffee equipment and water bar appliances need to be routed on the wall, and the positioning of the hole opening should be determined with the light strip during the layout stage - Lighting is mainly focused on spotlights and LED strips
The expressiveness of the background wall comes from the light and dark of the texture under oblique light, and bright materials will form reflection spots at this position - High cleaning frequency, maintenance should be simple
The bar is the most frequently cleaned area in the store, and the material must be able to withstand high-intensity neutral cleaning agent operations
Key indicators and acceptance criteria
The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.
| Project | Reference value / Practice | Based on |
|---|---|---|
| Substrate flatness | 2m Rule inspection, gaps ≤3mm | ★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels |
| Tabletop junction | The tabletop and wall should leave a process gap or add a receiving part, not to collide directly. | ★Project experience |
| Holes and wiring | The position and layout of the device outlet and LED strip holes should be determined in sync, avoiding the board seam | ★Project experience |
| Wear-resistant | Neutral cleaner + soft cloth, do not use steel wool | ★Project experience |
| Combustion performance | Graded according to GB 8624-2012, the detection report of the selected model is taken as the standard. | GB 8624-2012 Classification of Combustion Performance of Building Materials and Products |
| Indoor environmental pollution | Commercial buildings are controlled according to Class II civil buildings | GB 50325-2020 Indoor Environmental Pollution Control Standard for Civil Engineering Construction |
Common questions (FAQ) of coffee bar
The following are the most frequently asked questions in the design and procurement stages of this type of project
Should the background wall of the bar use a glossy or matte finish?
Matte. The bar is mainly illuminated by spotlights and light strips, which can cause glare spots and affect the visibility of the operation area; matte relies on texture to create light and dark, and both sides of the perspective are established.
Will milk stains and coffee stains seep into the wall?
The dense surface layer will not bleed color and can be wiped off with a wet cloth. Once high-porosity materials absorb pigments, they are difficult to remove, so the density of the surface of the bar should be prioritized.
How to deal with the seam when the countertop and background wall are to be integrated?
Two hard materials do not collide directly, leave a process gap or use a closing piece to transition. This not only avoids stress concentration but also facilitates late-stage individual replacement.
When should the socket and wiring for the bar equipment be arranged?
The layout stage should be determined with the equipment diagram, avoiding the edge of the board for the hole position. Leave it to the construction site to avoid it, as it is easy to open on the seam, and the washing light will enlarge this position.
The bar wall needs to be wiped every day, will it wear out?
The dense surface layer can withstand daily neutral cleaner wiping. The key is not to use steel wool or strong alkali, as it will scratch the surface and become more prone to dirt afterwards.
Are the requirements for the bar of a milk tea shop and a coffee shop the same?
Essentially the same. Milk tea shops have more syrup residue, and they are more dependent on the surface density and cleaning methods, with no essential differences in practice.
Related pages and requests
Overview of coffee and tea beverage cases·Coffee Shop Entrance Case·Coffee Backdrop Wall Case·Catering cashier counter case·Selection Guide
Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.