Catering space

29 cases of IGOODS in the catering space collected, covering hotpot, barbecue, Japanese cuisine and high-end restaurants, subdivided by lobby, storefront, and cashier.The page describes the key differences between catering wall surfaces and other commercial spaces (steam volume, oil smoke adhesion, cleaning strength), and provides verifiable control points: The base level flatness is within 3mm of the 2m ruler gap, the edge of the exhaust hood and the steam straight冲击 part is sealed with glue, the combustion performance is classified according to GB 8624-2012, and the indoor environmental pollution of commercial buildings is controlled according to GB 50325-2020 of Class II.

The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.

Cases implemented
30each
Covered city
24each
Involved part
Hall, Entrance, Cashier Desk
Check items on this page
6Item ·7Item basis

Case index

The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.

CaseCityMain material.Construction area
Hotpot Shop - Red - Rammed Earth———
Tea Room Carved Stone———
Rammed Earth New South Red Hotpot Shop———
Chinese Courtyard Hotpot - Red Rammed Earth - Flexible StoneNeijiang CityRammed Earth (New South Red1180 ㎡
Chinese Hotpot Shop - Rammed Earth - RedKangding CityRammed Earth (New South Red960 square meters
Chinese restaurant prints smooth graniteNanchong CityPrint smooth granite (Mi Huang)860 square meters
Rammed earth hotpot shop - flexible stoneDeyang CityRammed Earth (New South Red780 square meters
Star stone - restaurant decoration case - flexible stone———
Flexible stone - print slate - restaurant wall decoration effectGuangyuan CityPrinted Slate (Ancient Bronze Gold Brown)920 square meters
Hotpot Restaurant - Rammed Earth Plate - New South RedBaxian DistrictRammed Earth (New South Red1050 square meters
Hotpot Restaurant - Rammed Earth Plate - Flexible StoneFuling DistrictCoarse Rammed Earth (Warm Brown)1380 square meters
Hotpot Restaurant - Print Board Rock - Flexible StoneHechuan DistrictPrint Board Rock (Stained Old Color)1120 square meters
Hotpot Restaurant Wood GrainYubei DistrictWood Grain Panel (Warm Wood Color)780 square meters
Hotpot Restaurant Red Rammed Earth Board - Flexible StoneNan'an DistrictRammed Earth (New South Red1860 square meters
Hotpot Restaurant Decorative Material Recommendation - Print Board Rock - Golden SandJiangbei DistrictPrinted sandstone (Jinsha1080 square meters
Integrated restaurant printed soft stoneYongchuan DistrictPrinted soft stone (deep base and shallow veins620 square meters
High-end restaurant - printed rough surface granite - flexible stoneZunyi CityRough surface granite (dark gray1080 square meters
High-end restaurant earthen construction board new NanshanhongXingyi CityEarth construction (new Nanshanhong980 square meters
High-end hotel - printed slate - marbleGuiyang CitySlate (dark marble pattern1360 square meters
Rattan soft stone Japanese restaurantShannan PrefectureWoven soft stone (warm brown)620 square meters

The above are the first 20 of 29 cases, the complete list can be seen in the following card list.

When viewing these cases, it is recommended to check these 6 items.

Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.

  • First, look at what kind of catering: there is a great difference in steam volume.
    The steam and smoke produced by hotpot and barbecue are much more than that of ordinary Chinese cuisine. Long-term action on the wall will accelerate the aging of the bonding layer, and the first problem is the edge of the board. Determine the business before selecting materials, and then discuss the colors.
  • Smoke adheres to all facades, and cleaning is a necessity.
    Only dense surfaces can be cleaned with neutral detergents; materials with high porosity are difficult to clean thoroughly once they absorb oil stains. Pay special attention to the walls around the open display and exhaust hood.
  • The evening market is the main one, and the wall should stand in warm light.
    The visual evaluation of the restaurant mainly occurs in the evening. The expressiveness of the material comes from the light and dark differences of the texture under oblique light, and the bright surface material is only a light spot under the same light.
  • Arc-shaped partitions and columns are the main language of modeling.
    Arc-shaped partitions are commonly used in catering to divide dining areas. Rigid materials can only be spliced in pieces, and the seams appear densely along the arc; materials that can be bent can cover the entire surface.
  • Business begins after decoration is completed, without a period of odor dissipation.
    Catering projects usually open quickly after acceptance. Not using wooden sub-base, no formaldehyde added, and no asbestos are the basic requirements.
  • Don't want to redo the entire surface for local renovation after the later period.
    Dining room walls are often adjusted locally after 3-5 years. The layout stage determines the seam and closure position, and individual blocks can be replaced starting from the closure.

Key indicators and acceptance criteria

The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.

ProjectReference value / PracticeBased on
Substrate flatness2m Rule inspection, gaps ≤3mm★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels
Edge treatment in the steam areaEdge treatment and sealing with glue on the smoke hood and steam straight impact area to prevent water vapor from entering the edge of the board★Project experience
Surface is wear-resistantNeutral cleaner + soft cloth can remove oil stains, and steel wool is prohibited★Engineering experience; the surface density is based on the product files
Self-weight per square meter of materialFlexible stone about 3-7 kg/㎡; PU stone skin is a polyurethane lightweight structureOn-site product archives (by model)
Combustion performanceGraded according to GB 8624-2012, the grade is based on the detection report of the selected modelGB 8624-2012 Classification of Combustion Performance of Building Materials and Products
Indoor environmental pollutionCommercial buildings are controlled according to Class II civil buildingsGB 50325-2020 Indoor Environmental Pollution Control Standard for Civil Engineering Construction
Material is environmentally friendlyNo formaldehyde added, no asbestosOn-site product archive (inspection report can be provided with the goods)

Catering space common problems (FAQ)

The following are the most frequently asked questions in the design and procurement stages of this type of project

Are the wall materials required for hot pot restaurants and barbecue restaurants the same?

They are basically the same, but the steam output of hot pot restaurants is greater and mostly concentrated within 1.5 meters above the table, this height band should avoid using moisture-absorbing materials, and the edges should also be sealed. Barbecue restaurants are mainly attached with oil smoke, and the focus is on surface density and cleaning methods.

Can the restaurant make an arched booth wall?

Yes. Flexible materials can bend within a certain radius, cover the arched partition in one piece, and the seam lines along the arc are much neater than hard small pieces pieced together. For small radii, it is recommended to try bending with a physical sample first.

Can oil stains on the wall be cleaned off?

Dense surfaces can be cleaned with neutral detergent and a soft cloth. Do not use steel wool or strong alkali, as this will scratch or corrode the surface, making it more prone to dirt accumulation afterwards.

How long after renovation can the business be opened?

Materials do not use wood-based substrates, moisture-free operations, and there is no off-gassing period after wall construction. The specific opening time depends on the overall renovation progress, and the wall itself does not constitute a waiting item.

Is it necessary to remove the original wall when renovating an old restaurant?

The original wall is firm and without hollows, and it can be covered directly. However, if the old wall is heavily soiled with grease, it must be pre-treated with degreasing and interface treatment, otherwise the bonding layer will not adhere well.

What kind of inspection reports are required for catering projects?

The standard is the combustion performance (GB 8624-2012 classification) and environmental protection (formaldehyde, VOC) report. Stores in the mall usually also need to submit fire and environmental protection documents according to the mall property requirements.

Related pages and requests

Catering entrance case·Catering cashier counter case·Engineering case overview·PU Stone Skin Panel·Selection Guide

Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.

Contact phone number Product Catalog Free Sample
WeChat ID copied