Construction case of 480㎡ Star Moon Stone wall for dining space

IGOODS provided Star Moon Stone as wall material for a dining space project in Chengdu City, Sichuan Province, using the full-adhesion method for direct wall application without a furring base. The project's wall surface is estimated at approximately 480㎡, with material specifications of 1220×2930mm, thickness 2.5–3.5mm, and single-piece weight of approximately 17kg, conforming to JG/T 540-2017 "Flexible Stone-like Decorative Facing Materials for Buildings."

Published time:

IGOODS provided for a dining space project in Chengdu City, Sichuan Province, Food & Beverage Spaces Project provided by Star-Moon Stone As a wall material, it is applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 480㎡, material specifications 1220×2930mm Thickness 2.5–3.5mm The weight of a single piece is about 17kg; implement JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" The application images in this case total 8 pieces.

  • 1220×2930mm Panel specifications
  • 2.5–3.5mm thickness
  • Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
  • Approx. 480 ㎡ Wall area (◆budget estimate)
  • 8 pieces Application image
  • JG/T 540-2017 Implementation standards

Project file

Project item Content
Project typeFood & Beverage Spaces
Application locationStorefront / signage wall, booth partitions (curved), main wall / background wall, bar counter / cashier area
Materials usedStar-Moon Stone (art and three-dimensional texture series)
Material specifications1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationChengdu City, Sichuan Province
Wall areaApprox. 480 ㎡ (◆ budget estimate)
Actual photo record8 pieces (on-site shooting)

Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.

1. Customer industry usage scenario: the real wall requirements of food and beverage spaces

  1. Cooking fumes and cleaning agents are the biggest enemies of walls Dining walls need repeated scrubbing, and most cleaners are neutral or weakly alkaline. A dense surface resistant to repeated wiping is the baseline requirement.
  2. Atmosphere relies on warm colors and texture The visual atmosphere of a dining room is created jointly by lighting and material texture; large areas of plain color look cheap, while overly heavy texture overwhelms the dishes.
  3. Booth seating and partitions often have curved shapes Dining spaces make extensive use of curved partitions, semi-enclosed booths and arched doorways. These forms are design highlights and also construction difficulties.
  4. The storefront must withstand wind and sun. The storefront is exposed outdoors for the long term, so the material's UV resistance, weather resistance, and crack resistance must pass muster, and the adhesive must be weather-resistant.
  5. High table turnover rate, durability first Dining tables and chairs are pushed and pulled frequently, and the wall where the table is against the wall wears fastest.
  6. Strict fire protection requirements Dining venues are crowded places, so test reports for material combustion performance must be provided.

II. Material comparison: why Star Moon Stone

2.1 Why choose the Star Moon Stone

The texture of Star-Moon Stone is close to the craters and undulations of the lunar surface, White The version presses this texture into a clean white—up close it is dense relief, from a distance it is a plain white. It suits spaces that need "white but not flat": restaurants, showrooms, art installation backdrop walls.

Art and three-dimensional texture series provides White, black, light gray and other colors, with the rest customizable; the visual tone of this case is based on White crater texture as the base tone.

2.2 Material performance parameters

Project Parameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant;The specific grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions.
Bonding methodFull-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner.
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'

Specifications and packaging parameters

Specifications (mm) Thickness (mm) Approx. weight per panel (kg) Wooden crate packaging (pieces/crate) Area per box (㎡)
1220×29302.5–3.51770Approx. 250.2

The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.

3. Configuration plan

3.1 Allocate materials by spatial function

Space / Location Suggested materials Specifications Key focus
Storefront / signage wallFlexible Stone(weather-resistant)1220×2930mmOutdoor weather resistance, edge sealing and waterproofing
Booth partition (curved)Flexible stone (curved)Same as aboveBending radius, splice locations
Main wall / background wallFlexible StoneSame as aboveLighting coordination, texture direction
Bar counter / cashier areaSame as aboveSame as aboveAbrasion resistance, rounded corners

3.2 Quantity and project schedule estimate

Dosage formula (★engineering experience basis):

Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up)
Item Calculation Result
Wall area of this project—Approx. 480 ㎡
Wastage rate★Value by spatial complexity10%
Material preparation area480 × 1.10Approx. 528 ㎡
Number of wooden crates528 ÷ 250.2 → round up3 boxes

Construction period estimate (◆ estimate):

Stage Schedule
Substrate treatment (knock out hollow areas + leveling + drying)Substrate treatment usually accounts for about 1/3 of the total construction period
Layout setting-out★The denser the holes, the greater the layout workload
Adhesive mounting on wall★2 people can complete 60-100㎡ per day; 480㎡ ÷ 80㎡/day ≈ 6 days
Finishing · Cleaning · Acceptance★Project experience
Total (budget estimate)Approx. 11 days(range 8–14 days)

Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.

A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.

3.3 Material Configuration

Stage Materials Function Basis
BondingSpecial adhesive,Full adhesion methodEnsure the finish and substrate are fully bondedProduct technical requirements; weather-resistant adhesive for outdoor use
SubstrateLeveling materials (selected according to substrate condition)Provide a flat, dry substrate free of hollowingSubstrate flatness directly affects appearance
Close upEdge trim / metal trimTreat internal and external corners, door frames, and wall base closures★Engineering Experience Practices
CuttingUtility knife / special cutting toolOn-site cutting according to the layout drawingOn-site secondary cutting is standard practice

IV. Construction process and acceptance control points

Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.

Step 1 · Base treatment

Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.

★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.

Step 2 · Measurement and layout

It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.

Step 3 · Cutting

Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.

Step 4 · Adhesive application and wall installation (full adhesion method)

RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.

Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.

Step 5 · Joints and edge finishing

  • Tight-joint: The seam lines are the finest, suitable for regular walls;
  • Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
  • Metal trim: Used for closing edges and emphasizing lines.

Step 6 · Cleaning and self-inspection

Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.

Step 7 · Delivery acceptance

Control points Standard value or practice Basis
Substrate dryness / hollowingdry, free of floating dust, no hollowing; if not compliant, repair first★Engineering Experience Practices
Substrate flatnessLeveling in place, repair deficiencies first★Engineering Experience Practices
Bonding methodFull bonding method, adhesive selected according to product instructionsProduct technical requirements
Material execution standardJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'Product execution standard
Internal and external corners and closuresEdge trim / metal trim closure, trim straight and true★Engineering Experience Practices
Cutouts and panelsThe cutout position is coaxial with the panel, and the edges are not chipped★Engineering Experience Practices
Color difference controlUse the same batch of material for the same wall surface in the same space★Engineering Experience Practices
Joint straightnessAlign joint lines within the same space, with no obvious misalignment visually★Engineering Experience Practices
Environmental protection indicatorsNo added formaldehyde, no asbestosProduct information (subject to the test report for the model)

V. Image display and application description

Total application photos of this project 8 pieces; all photographed on site at the project, covering the booth area, wave background wall, circular bar counter, columns and wine cabinet, spiral staircase, circular landscape pool, art wall, reception signage wall and other areas.

Booth, white coarse-textured curved wall and dark sofa
Figure 1 · Booth seating, white coarse-texture curved wall and dark sofa
Indoor end feature, white wavy wall with landscape pool
Figure 2 · Indoor end wall, white wavy wall and landscape pool
Ring-shaped bar counter, white coarse-texture column surface and petal-shaped ceiling
Figure 3 · Circular bar counter, white heavily textured column surface and petal-shaped top
Glass-enclosed space, white curved wall and warm-toned edge lighting
Figure 4 · Glass-enclosed space, white curved wall and warm-colored edge lighting
Top view of spiral staircase, white curved side panel and wood-colored treads
Figure 5 · Spiral staircase viewed from above, white curved side panel and wood-colored treads
Enclosed landscape, white curved planter and plants
Figure 6 · Enclosed landscape, white curved planter and plants
Full-height wall surface, white coarse-texture background and metal decoration
Figure 7 · Full-height wall, white coarse-texture background and metal decoration
Dining room reception desk, white textured counter body with brand logo
Figure 8 · Restaurant reception desk, white textured counter body and brand logo

VI. Communication and confirmation process

For wall projects in dining space projects, communication mainly revolves around three things:Whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.

Owner: Ours is a dining space, and we want the wall to have the texture a dining space should have. What do you suggest?

IGOODS: It is recommended to first clarify three things: gloss level (matte, not high-gloss), texture strength (weak texture is more enduring), and whether curved shapes are required. For materials in the art and three-dimensional texture series such as Xingyue stone, the white crater texture performs relatively stably and can be adapted.

Owner: How should cutouts and panel joints be handled?

IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.

Owner: What should be noted about the base layer?

IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.

Owner: Will it be easy to clean later?

IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.

Owner: To what extent is it dirt-resistant and scratch-resistant?

IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.

What was confirmed in this communication?

  • Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
  • Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
  • Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
  • Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
  • Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.

Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.

Seven, usage effects and daily maintenance

7.1 What is the perception of space?

The sense of premium quality in white comes from Texture rather than color. The star and moon stone is mounted on the wall, and the white wall will appear fine shadow particles under the side light; the same wall presents different levels of layers throughout the day as the angle of light changes; combined with the curved shapes of the spiral staircase and circular landscape pool, the whole space has a "carved" overall feel.

7.2 Daily maintenance

Scenario Treatment method
Daily floating dustdry cloth or feather duster
Water stains / beverage stainsWipe with clean water or neutral detergent
Oily stainsNeutral cleaner,Avoid strong solvents
Minor scratchesJudged by texture type; textured surfaces themselves are relatively tolerant of minor marks
Prohibited practicesStrong acid and strong alkali solvents, steel wool, grinding machines

Maintenance-related characteristics of the material itself (from product documentation):

  • Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
  • Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
  • Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
  • Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.

7.3 On-site Recheck After Delivery

Review items Inspection content Basis for determination
Joints and closuresWhether joint lines are straight, whether lines are aligned, whether corners are properly executedno obvious misalignment by visual inspection
Cutouts and panelsWhether the switch and socket are coaxial with the cutout and whether the edges are chippedPanel coverage with no exposed edges
Whole wallWhether there is hollowing or obvious color differenceHollowing rate 0; no visible color difference on the same wall

Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.

7.4 Cost Reference

Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.

Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:

Item Calculation Result
Lower limit of material amount480 × 25Approx. RMB 12,000
Upper limit of material amount480 × 300Approx. RMB 140,000

Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.

VIII. Common questions (FAQ)

Will a white wall surface look monotonous?

Depends on the texture. The white of Star Moon Stone is not a flat white—the ring-shaped pits and undulations create fine shadows under side light, and the same wall shows different layers at different angles and times. It is advisable to look at samples under side light when selecting materials, rather than only looking at frontal diffuse light.

Can Star-Moon Stone be used for continuous curved surfaces such as spiral staircases?

Yes. Flexible stone can be bent within a certain radius, and spiral staircases, columns and circular pool walls can all be continuously wrapped. But Sample sections must be confirmed for small-radius continuous curved surfaces (curved radius, springback amount, joint positions), and it cannot be installed directly on the wall based on experience. For the specific radius, refer to the model's technical data.

How should cleaning and wear resistance be considered for dining room walls?

The surface of Star-Moon Stone is dense and not prone to staining; daily cleaning with water or a neutral cleaner is sufficient. High-frequency contact positions such as walls next to dining tables and the sides of booth seating wear fastest, It is advisable to reserve spare material according to area Used for partial replacement to avoid color differences due to batch variations in the future.

With many curved surfaces and many openings, how much extra loss allowance should be added to material preparation?

★Engineering Experience: Regular wall 5%–8%, Spaces with many corners and openings 10%–15% The approximate budget for this case is about 480㎡, with material preparation of about 528㎡; at 250.2㎡ per box, 3 boxes are required. Be sure to use the same batch for the same wall in the same space.

IX. Project File and Contact Information

Project file Content
Project typeFood & Beverage Spaces
Materials usedStar-Moon Stone (art and three-dimensional texture series)
Material specifications1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg
Packaging70 Sheets/Case | Approximately 250.2㎡/Case
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationChengdu City, Sichuan Province
Wall areaApprox. 480 ㎡ (◆ budget estimate)
Actual photo record8 pieces

Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door

  • Phone / WeChat / WhatsApp: 19136341389
  • Email: 19136341389@163.com
  • Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
  • Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response

Content and scope statement: This page records the wall material selection and construction process for this dining space. The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆Estimate" are estimated values for area, schedule, and cost calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.

Find the appropriate wall expression for your project.

Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.

Consulting project material selection ↗
Contact phone number Product Catalog Free Sample
WeChat ID copied