Coffee Shop Front

Includes the coffee and dessert shop front cases of EIGOODS. The page explains that the coffee shop front is a typical small-scale semi-outdoor interface: it must be durable (weather-resistant adhesive + waterproof edge), and it must also convey the brand character within the limited scale, with higher accuracy requirements for the closure than large-area engineering. And give verifiable control points: the flatness of the base layer is according to the 2m rule gap ≤3mm, the sign outline is reserved to avoid the board joint during the layout stage, and the flammability is classified according to GB 8624-2012.

The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.

Cases implemented
3each
Covered city
3each
Involved part
Shopfront and side wall of display window
Check items on this page
6Item ·6Item basis

Case index

The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.

CaseCityMain material.Construction area
Real case of coffee shop shopfront and background wallHaikou CityTravertine (milky white 130 m²
Cake shop shopfront · Nan Dao Nian Hua Shi real caseXiamen CityNan Dao Nian Hua Shi (black and white88 ㎡
Coffee shop · Star and Moon Stone wall real caseQingdao CityXingyueshi (light color)60 square meters

When viewing these cases, it is recommended to check these 6 items.

Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.

  • The shopfront is the main customer acquisition interface of the coffee shop
    Most of the customers of the coffee shop are converted through passing by, so the shopfront must be eye-catching but not cheap. The combination of the matte texture of the material and the light is the decisive factor.
  • The semi-outdoor interface must be weather-resistant
    The shopfront and the lower semi-outdoor wall of the eaves should use weather-resistant adhesive, and the edges should be waterproof treated.
  • Night and day are two viewing conditions
    During the day, the color of the material is seen, and at night, the relationship between the light and the texture is seen. The color selection should be checked under both conditions.
  • Reserve layout for signboard and light box
    Fixed parts pass through the plate into the base layer, and the outline of the signboard should be marked out at the layout stage to avoid fixed points falling on the plate joints.
  • The storefront is often the same as the indoor background wall
    Using the same material for both the interior and exterior can unify the brand image and reduce the variety and loss of materials
  • Storefront is small, higher precision is required for the closing.
    The scale of the coffee shop storefront is small, and the small defects in joints and closures are easily seen from close up, requiring higher construction accuracy than large-area projects

Key indicators and acceptance criteria

The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.

ProjectReference value / PracticeBased on
Substrate flatness2m Rule inspection, gaps ≤3mm★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels
Adhesive agent.Weather-resistant adhesive is used for outdoor and eave areas★Engineering experience; select according to product instructions
Edge waterproofing.Waterproof treatment is done at the eaves and edges, and the lower mouth of the board does not directly touch the ground★Project experience
Reserve for signboardReserve for signboard and light box outline during layout, avoid fixing points near board joints★Project experience
Combustion performanceGraded according to GB 8624-2012, the detection report of the selected model is taken as the standard.GB 8624-2012 Classification of Combustion Performance of Building Materials and Products
Indoor environmental pollutionThe indoor part is controlled according to commercial buildings (Class II civil buildings).GB 50325-2020 Indoor Environmental Pollution Control Standard for Civil Engineering Construction

Common questions (FAQ) about coffee shop storefronts

The following are the most frequently asked questions in the design and procurement stages of this type of project

What texture is more stable for coffee shop storefronts?

Matte texture with fine texture. It looks clean in the daytime and has layers under the wall washing light at night, which is valid under both conditions

How long will the signboard material become old?

For the signboard constructed according to the weather-resistant aperture, it only needs to be regularly washed in daily life. The part that usually has problems is usually the edge sealing part, and it is enough to check once after the rainy season.

The signboard has not been decided yet, can we paste the wall first?

It is not recommended. The outline of the signboard should be marked during the layout stage, the fixed parts should be inserted into the base layer, avoiding the board joints, and it is easier to penetrate the board after completion.

Will it be too monotonous if the signboard and the store inside use the same style?

No. The same style of full paving depends on the lighting to distinguish the inside and outside, which is more unified; if you worry about monotony, you can use the darker version of the same series to create layers at the signboard.

What should be paid attention to during the construction of a small signboard?

Joint precision. On the small scale facade, the flaws of joints and edges are clearly visible at a close distance, so it is more dependent on layout and matching joint parts.

What inspection documents are needed for the storefront?

The conventional one is the fire performance report (GB 8624-2012 classification). Some cities have additional approval requirements for facade renovation along the street.

Related pages and requests

Overview of coffee and tea beverage cases·Coffee Bar Counter Case·Coffee Backdrop Wall Case·Catering entrance case·Selection Guide

Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.

Contact phone number Product Catalog Free Sample
WeChat ID copied