Fashion background wall
Collection of AIGOODS' clothing store background wall cases. The page explains the first principle of the background wall is 'step back to the background' - the color of the product itself is very strong, once the wall reflects or the saturation is too high, it will compete for the attention with the product; and provides verifiable control points: the flatness of the base layer is measured by a 2m ruler gap ≤3mm, priority is given to matte low reflection surface, the panel surface does not warp or change color under long-term lighting of spotlights, the hanger rod and the fixed parts of the layer plate pass through the panel into the base layer to avoid the gap of the panel, when the height of the layer is limited, the vertical pasting is preferred to enhance the sense of height.
The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.
- Cases implemented
- 4each
- Covered city
- 4each
- Involved part
- background wall, display area
- Check items on this page
- 6Item ·6Item basis
Case index
The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.
| Case | City | Main material. | Construction area |
|---|---|---|---|
| Women's clothing store background wall · South Island years trace real shooting case | Changdu City | Nan Dao Nian Hua Shi (black and white | 180 square meters |
| Women's clothing store entrance background wall · printed travertine real shooting case | Dongguan City | travertine (printed travertine) | 190 sqm |
| Clothing store background wall · concrete casting plate real shooting case | Nanning City | Cement Casting Panel (Grey) | 200 square meters |
| Fashion Store Background Wall · 3D Printing Travertine Real Shooting Case | Zhengzhou City | Travertine (3D Printed Travertine) | 170 m² |
When viewing these cases, it is recommended to check these 6 items.
Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.
- The background wall should complement the products, not steal the show
The background wall of the clothing store is behind the display and models. The higher the reflection, the more likely it is to compete with the products. Materials with low reflection and low saturation are more reliable. - The display system needs to be fixed at a point
The clothing rod, shelf, and track light must be fixed to the wall. Mark the fixed points during layout, pass the board into the substrate, and avoid falling into the board gap. - Long-term illumination of spotlights, materials cannot deform
The density and long duration of spotlights in clothing stores directly affect the flatness of the facade after materials are heated - The store is small and the height is limited, it needs to be made taller
Most clothing stores have a limited net height, and vertical textures are the most direct means of visual height increase, and the cost is also lower than changing the ceiling. - Customers will observe the material closely
Trying on and selecting clothing occur next to the wall, and the texture's feel can be seen: from a distance, there should be a base color, and up close, there should be details. - Don't want to damage the wall when adjusting the display for the change of seasons
The display position of the background wall changes with the seasons, and it is more convenient to reserve conditions for replacement than to redo the entire wall.
Key indicators and acceptance criteria
The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.
| Project | Reference value / Practice | Based on |
|---|---|---|
| Substrate flatness | 2m Rule inspection, gaps ≤3mm | ★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels |
| Reflection | Prioritize matte low-reflective surfaces, do not compete with the product for attention | ★Project experience |
| Lamp tolerance | The panel does not warp or change color under long-term exposure | ★Engineering Experience; The product's heat resistance data is taken as a standard |
| Display fixed points | The hanger rod and the fixed piece of the shelf pass through the plate into the substrate, avoiding the panel gap | ★Project experience |
| Texture direction | When the height is limited, it is preferred to paste vertically to enhance the sense of height | ★Project experience |
| Combustion performance | Graded according to GB 8624-2012, the detection report of the selected model is taken as the standard. | GB 8624-2012 Classification of Combustion Performance of Building Materials and Products |
Common questions (FAQ) about clothing background walls
The following are the most frequently asked questions in the design and procurement stages of this type of project
Why can't the background wall of a clothing store be reflective?
Reflection can form light spots, attracting customers' attention to the wall rather than the clothes. Matte surfaces scatter the light, making the background recede and the product stand out, which is the most basic function of the background wall.
How can I make the room look taller with lower ceiling height?
Use vertical texture. Vertical laying will form an upward visual guidance, which is the most cost-effective way to enhance height, cheaper than changing the ceiling, and does not occupy the height.
Will the hanger rod fixed on the wall damage the board?
The fixed parts will not go through the board into the substrate. The key is to mark the position of the rod and the layer board during the layout stage, avoiding the board joints and the edge of the board.
Will the wall change color if the spotlight is on for a long time?
It depends on the surface layer. The lamination or co-extrusion surface layer is more stable under long-term exposure. When selecting materials, confirm the heat resistance and yellowing resistance data of the product, and do not just look at the display effect.
Should the dressing area be changed to a different material?
Not recommended. The same style of full paving, relying on lighting to distinguish the area, the integrity is stronger; changing materials is more likely to appear color difference and closure problems at the junction.
Will changing the display destroy the wall?
As long as the replacement condition is reserved during layout, it will not. It is recommended to design the display fixed parts in a removable form, only moving the hanging boards without moving the main materials.
Related pages and requests
Overview of clothing retail cases·Clothing entrance cases·Commercial retail case·wood paneling wall·Selection Guide
Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.