Retail storefront
Contains retail storefront cases of IGOODS. The page description states that the storefront of the street store is the only advertising position, but the available wall area is very small, and the door frame, light box canopy are crowded together, the amount of intake is much higher than that of large-area projects. And provide verifiable control points: the flatness of the base layer is ≤3mm by 2m ruler gap, the signboard and light box contour is reserved to avoid the board joint during the layout stage, ventilation and maintenance conditions are left between the light box and the wall, and the flammability is graded according to GB 8624-2012.
The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.
- Cases implemented
- 1each
- Covered city
- 1each
- Involved part
- Signage, light box
- Check items on this page
- 6Item ·6Item basis
Case index
The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.
| Case | City | Main material. | Construction area |
|---|---|---|---|
| Optical store storefront · Printed travertine real shooting case | Fuzhou City | travertine (printed travertine) | 120 square meters |
When viewing these cases, it is recommended to check these 6 items.
Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.
- The signboard is the only advertising position of the small store
The flow of small stores on the street depends entirely on the signboard, and the recognition of the material and the coordination with the lighting determine the entry rate - The semi-outdoor interface must be weather-resistant
The wall of the signboard is directly exposed to the wind and rain, and it must use weather-resistant adhesive and do waterproof trimming - Fixed signs, light boxes, and awnings
The fixed parts pass through the board into the substrate, and the outline of the sign should be marked during the layout stage to avoid the fixing points on the board seam - Viewing at night is prioritized
The peak time of street stores is after dusk, and the evaluation of the signboard mainly occurs under the night light - Small scale, tight mouth
The door frame, light box, and awning of the small store sign are crowded together, and the amount of closing is much higher than that of large-area projects according to the area ratio - Renovation during business hours needs to control the construction period.
The shop being closed is a loss, the method of avoiding the skeleton and wet work can significantly compress the construction period.
Key indicators and acceptance criteria
The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.
| Project | Reference value / Practice | Based on |
|---|---|---|
| Substrate flatness | 2m Rule inspection, gaps ≤3mm | ★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels |
| Adhesive agent. | Use weather-resistant adhesive at outdoor and eave locations. | ★Engineering experience; select according to product instructions |
| Edge waterproofing. | Waterproofing treatment around the eaves, door casing and light box. | ★Project experience |
| Reserve fixed points. | Reserve the outline of the signboard, light box and canopy once in the layout stage. | ★Project experience |
| The relationship between the light box and the wall. | Avoid the board joints when fixing the light box, and leave ventilation and maintenance conditions between the light box and the wall. | ★Project experience |
| Combustion performance | Graded according to GB 8624-2012, the detection report of the selected model is taken as the standard. | GB 8624-2012 Classification of Combustion Performance of Building Materials and Products |
Common problems (FAQs) of retail storefronts.
The following are the most frequently asked questions in the design and procurement stages of this type of project
Is it worth using good materials for a small storefront wall, which is very small?
It is worth it. The storefront is the only advertising position of the small store, and the texture of the material directly determines the entrance rate; and since the area is small and the amount is small, the material upgrade has a limited impact on the total cost.
How to fix the signboard and light box without damaging the wall?
Mark the outline in the layout stage, pass the fixed parts into the substrate through the board, avoid the board joints, and leave ventilation and maintenance conditions between the light box and the wall.
How long should the sign renovation be closed for?
The method of doing without skeleton and without wet work has a short construction period, and the small area door head can usually be completed in a few days, and the impact on business is controllable.
What should be done if the wall whitens under the night lighting?
Change to a matte surface. The glossy surface will whiten and form a reflection spot under the spotlights at night, while the matte surface relies on texture to create layers, and the light box makes it more textured.
What special requirements do professional retail stores like optical shops have for walls?
The products need to be lit, and the wall cannot reflect. The display of professional retail stores often relies on spotlights for key lighting, and the duller the wall, the better the control of the product lighting.
What documents do you need for the door head?
The standard is the combustion performance report (GB 8624-2012 Classification). Part of the city's street facade renovation has additional outdoor advertising and facade approval requirements.
Related pages and requests
Overview of commercial retail cases·Clothing entrance cases·Catering entrance case·Qualification certificates and inspection reports·Selection Guide
Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.