Exterior walls and residential buildings

Contains cases of exterior walls and residential buildings of EIGOODS. The page describes two sets of construction specifications for outdoor and indoor: outdoor requires weather-resistant adhesive, waterproofing and dripping edges, and adopting the indoor method will cause peeling from the edges after two or three years. And provide verifiable evidence: product performance according to JG/T 540-2017 'Building Flexible Stone Decorative Material', base levelness according to 2m ruler gap ≤3mm, fire performance according to GB 8624-2012 classification, and radioactivity according to GB 6566-2010 Class A decorative materials.

The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.

Cases implemented
5each
Covered city
2each
Involved part
Building exterior, villa facade
Check items on this page
7Item ·7Item basis

Case index

The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.

CaseCityMain material.Construction area
Actual case of exterior litchi surface graniteXigaze CityMatte granite (litchi surface light gray1260 square meters
Romania villa project actual caseZhongshan CityPrinted soft stone (beige680 square meters

When looking at such cases, it is recommended to check these 7 items

Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.

  • Outdoor parts must use weather-resistant methods
    The exterior wall is directly exposed to sunlight, rain, and temperature differences. It is necessary to use weather-resistant adhesive and waterproofing at the edges; using indoor methods for two or three years will cause the edges to curl up.
  • The exterior wall does not impose a burden on the main structure
    The masonry and thermal insulation wall does not have the bearing conditions for hanging stone, and the weight per square meter of the material directly determines whether this wall can be made.
  • Vertical texture and building proportion
    Vertical lines will pull the building visually higher, and horizontal textures will make shorter buildings appear more pressed——this is the first principle of exterior wall layout.
  • Design corner and window molding closure
    The exterior wall window molding, line corner is dense, the closure piece is the same color as the main material, and construction is carried out according to the node drawing, only then the facade is clean.
  • Cleaning and resistance to dirt
    The exterior wall will accumulate dust, the material surface is dense, it can be washed with water, which is the basic requirement; the eaves and edges should be treated with water droplet treatment.
  • Large area projects need to control batch color difference
    The exterior wall is often constructed in sections, and different batches will expose color differences at the corner intersections. The method is to order enough at one time or mix the material before laying.
  • Interior room position according to indoor diameter
    The indoor part of the same project is constructed according to the indoor method, partitioned with the outer wall, and the joints are left at the shadow angle.

Key indicators and acceptance criteria

The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.

ProjectReference value / PracticeBased on
Substrate flatness2m Rule inspection, gaps ≤3mm★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels
Adhesive agent.Use weather-resistant adhesive for outdoor and semi-outdoor parts★Engineering experience; select according to product instructions
Edge waterproofing.Waterproof and drip treatment for eaves, window surrounds, and corners★Project experience
UV resistance and weather resistanceHas the ability to resist ultraviolet radiation, high and low temperatures, and weatheringIntranet product archive (product performance within the scope of JG/T 540-2017)
Product standardsPerformance requirements for flexible artificial stone facade materialsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Combustion performanceGraded according to GB 8624-2012, the grade is based on the detection report of the selected modelGB 8624-2012 Classification of Combustion Performance of Building Materials and Products
RadioactiveA class decoration materials can be used for I class civil buildings, the scope of application is not limitedGB 6566-2010 Radioactive Nuclide Limit of Building Materials

Common problems with building exterior walls and residential buildings (FAQ)

The following are the most frequently asked questions in the design and procurement stages of this type of project

Do you need to build a steel frame first for the flexible stone facade on the outer wall?

Not needed. The material is lightweight (flexible stone about 3-7kg/㎡); once the substrate is leveled, it can be fully surface bonded. Masonry walls and insulation walls can be done directly, and the embedded system for dry-hanging can be omitted.

What are the differences between exterior wall construction and indoor construction?

The main difference is in the adhesive and edge treatment: outdoor work must use weather-resistant adhesive, and the edge treatment must be waterproof and drip-proof. Applying the indoor method to the outdoors is the most common reason for rework.

Will the exterior wall fade?

It depends on the ultraviolet resistance of the surface layer. When selecting materials, confirm the anti-ultraviolet and weather resistance data of the product; in addition, controlling possible batch differences before laying (mixed material layout) is more effective than color correction later.

How many years does the exterior wall need to be maintained?

The facade constructed according to the design diameter is mainly cleaned with water regularly in daily life. After the rainy season, check the edges and sealing parts once for any cracks.

Can the same material be used indoors and outdoors for the villa?

It can be the same style, but the construction must be separated: outdoor weather-resistant methods, indoor conventional methods, with the joints left at the corner, and the two methods do not intersect directly.

What inspections are needed for the exterior wall project?

The conventional ones are the combustion performance report (GB 8624-2012) and the product performance report (JG/T 540-2017); for export projects, additional CE, RoHS, REACH and other documents are required.

Related pages and requests

Material actual shooting·Flexible stone product line·PU Stone Skin Panel·Qualification certificates and inspection reports·Engineering case overview

Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.

Contact phone number Product Catalog Free Sample
WeChat ID copied