Solutions

scene plan

Provide the combination and judgment points of the wall material system for nine types of space scenarios: Hotel (view from the lobby for layering, corridor for seam management, guest room for wall bearing), Catering (steam volume and smoke determine the material boundary), Coffee (entrance belongs to semi-outdoor, requires weather-resistant treatment), Retail (background wall must recede to the background position), Office, Beauty Industry, Education, Recreation and Entertainment, and Renovation of Building Envelopes. Includes 19 scenario-material comparison matrices, 8 decision conditions, and verifiable references.

From material selection, sample making to engineering coordination and on-site delivery, matching the appropriate wall system for each space.

Covered scenarios
9 Space type
Compare the matrix
19 Scene - material correspondence
Verifiable basis
8 Decision conditions
Cases implemented
101 a project

Scene × Material Correspondence

The criteria for judging the same wall under different business models is not the same. The table below divides the nine types of spaces according to 'parts', lists the commonly used materials and key judgments, and can be matched directly.

Scene / LocationCommon materialsCritical judgmentCase
Hotel · LobbyFlexible Stone (Marble Texture / Cave Stone Texture)When the floor height is ≥4m, the joints must be determined at one time, and the starting point is self-visualizedCheck
Hotel · CorridorFlexible Stone (Wood Grain / Fabric Texture), WPC Grating PanelLED strips washing walls can amplify flaws, and the stitching must be offset from the top of the LED stripCheck
Hotel · Guest RoomFlexible Stone (Slate / Wood Grain) · Wood Grain Wall PanelPartition walls are mostly lightweight walls; self-weight determines material feasibility (3–7 kg/㎡)Check
Hotel · Entrance FacadePU Stone Skin Panel, Flexible Stone (Weatherproof)The semi-outdoor interface must be weather-resistant and waterproof with separate treatment from the indoor methodCheck
Food & Beverage · Main HallFlexible Stone (Adobe / Rough Granite / Reed Soft Stone)Steam volume and oil fume adhesion determine material boundaries; edges must be sealedCheck
Food & Beverage · StorefrontPU Stone Skin Panel, Flexible Stone (Rammed Earth)Nighttime is the main viewing period, matte surfaces show layers, and glossy surfaces only have light spots.Check
Food & Beverage · Cashier CounterFlexible Stone (Bamboo Woven Soft Stone), PU Stone Skin PanelAbove the surface 90-140cm is a high-frequency contact zone, the joints must be staggeredCheck
Coffee · EntranceFlexible Stone (travertine / South Island Age Trace), PU Stone SkinThe semi-outdoor interface at a small scale has higher requirements for closure accuracy than the large-area projectCheck
Coffee · BarFlexible Stone (Star Stone / Slab)Long-term action of milk stains and moisture, leaving construction joints on countertops and wallsCheck
Coffee · Background wallFlexible Stone (Adobe / Cave Stone)For close-range viewing, angled spotlighting will accentuate substrate undulationsCheck
Clothing · EntranceFlexible Stone (Adobe / Printed Cave Stone)In-store decisions are made within three seconds at the entrance, with nighttime appearance taking priorityCheck
Clothing · Background wallFlexible Stone (South Island Aged Trace / Cement Casting Plate / Carved Stone)The background must step back to the background position: low reflection, low saturation, do not compete with the productCheck
Commercial retail · Image wallFlexible Stone, PU Stone Skin PanelShelf and light track fasteners must penetrate the panel into the substrate and avoid panel jointsCheck
Retail · storefrontFlexible Stone (travertine)The small storefront door casing light box canopy is crowded together, and the amount of closure is high according to the area ratioCheck
A beauty industry · Front desk / Nursing areaFlexible Stone (Star Stone / Marble Texture Flat Panel)Requires resistance to alcohol and disinfectant wiping; avoid glare from lying posture in care areasCheck
Cultural educationFlexible Stone (Adobe), Wood Grain Wall PanelDo not leave sharp angles and easily falling off parts; formaldehyde E1 ≤0.124 mg/m³Check
Leisure and entertainment · Bars / clubsFlexible Stone (Grainy Granite / Breadstone)In low-light spaces, first look at the reflection and then the color, the bright surface will reflect light spotsCheck
Building exterior wall / RenovationFlexible Stone (Rough granite / Printed soft stone), PU Stone SkinOutdoor weather-resistant method; masonry walls are not hung dry, and the weight is a hard constraintCheck
Material actual shooting referencePhysical texture and joint nodes of each product lineClose-up view of the texture and its reaction to light, with the joint finishing method visibleCheck

How to use this table:First find the corresponding line according to your space type, look at the column of 'Key Judgment' - it describes the place where this kind of scenario is most likely to have problems. For example, the first constraint of hotel guest rooms is wall bearing (lightweight walls cannot be hung dry), the first constraint of catering door signs is weather resistance (semi-outdoor must change glue and edge banding), and entertainment and leisure should be the opposite, first look at the reflection and then look at the color.

Select methods based on conditions: eight decision conditions

Scenarios are just an entry, what really determines the approach is often the specific on-site conditions. The table below gives directions based on eight common conditions.

Site conditionsDirection of practiceKey points
When the floor height is ≥4m (hall / high-rise atrium)Prioritize full-height paving, reducing horizontal joints.First determine the position of the central axis and door casing, and advance in the direction of the self-view to both sides; avoid the seams from directly facing the entrance
There are arched walls / cylindersChoose a bendable flexible material for full-sheet wrappingLarge-radius whole piece bending; for small radius, use a physical sample to bend first, and narrow strip splicing is changed when the rebound is obvious.
Lightweight partition walls / insulated walls / old wallsOnly light, adhesive materials can be used, not dry-hungFlexible stone, 3-7kg/㎡ full adhesion is enough; the base must be knocked off and remade first
Damp areas / underground spacesThe material must not absorb water, and the base layer should be waterproofed first.The material cannot replace the waterproofing layer; the scope of the wet area is confirmed according to the dry-wet zoning map
Semi-outdoor / Outdoor Interfaceweather-resistant adhesive + edge waterproofing + dropletDivided into sets according to the indoor method, the joints are left at the corner, and the two methods do not intersect directly
Tight schedule / renovation in business hoursPaste method without skeleton or wet work.The subgrade can be continuously promoted after the acceptance is qualified, with no off-gassing period and no impact on the concurrent operation
Requires long-term lighting / dense spotlightsConfirm the heat resistance and yellowing resistance data of the surface layer.Retail and apparel formats have high spotlight density; glossy surfaces show aging more readily under long-term exposure
Ceiling and pillarCustomize irregular plates according to shape, do not cut on site.The cutting accuracy of the irregular parts on site is not enough, the incisions must be covered with closing parts

Scenario-based scheme

The following will expand nine types of space one by one: how to match the material system, what is the key judgment, and what cases can be referenced.

🏨Hotels and B&Bs

Material system:Flexible Stone (Slate / travertine / Wood Grain / Fabric Texture) · Wood Grain Wall Panel · WPC Grating Panel

  • The judgment criteria for the lobby, corridor, and guest room in the same building are different: the lobby is observed from a distance, the corridor is checked for seam management, and the guest room is checked for wall bearing - it is not recommended to copy a single material all at once.
  • Multiple floors must be supplied in the same batch. When materials are delivered in batches, color differences will be exposed at positions such as the stairs and elevator halls where two batches of materials intersect, and mixed materials must be arranged before laying.
  • Corridor light strip wall washing will reveal all substrate undulations and joint misalignments; seams should either be offset from directly above the light strip or run parallel at equal distances from it.

Relevant Cases and Guidelines:Hotel lobby case · Hotel corridor case · Hotel guest room case · Hotel entrance facade case

🍲Food & Beverage and Hot Pot

Material system:Flexible Stone (Adobe / Rough Granite / Reed Soft Stone / Bread Stone) · PU Stone Skin Wall Panel

  • First determine the business type and then discuss the color: The steam volume of hotpot and barbecue is far greater than that of ordinary Chinese cuisine, which will accelerate the aging of the bonding layer, and the first problem to arise is the edge of the board.
  • The exhaust hood and the edge of the steam straight-through part need to be sealed with glue to prevent moisture from entering the edge of the board; the surface of the wall must be dense before it can be cleaned of oil stains with a neutral cleaner.
  • Curved partitions and columns are the main shaping language of catering, hard materials can only be spliced in pieces, and the sewing line is dense along the arc, while bendable materials can be wrapped in whole.

Relevant Cases and Guidelines:Food & Beverage Space Cases · Food & Beverage Storefront Cases · Food & Beverage Cashier Counter Cases

☕Coffee and tea drinks

Material system:Flexible Stone (travertine / Star Moon Stone / South Island Age Trace / Rammed Earth) · PU Stone Skin Panel

  • A door head is a semi-outdoor interface, so weather-resistant adhesives must be used and waterproof edge sealing must be done—applying interior methods outdoors will cause edge lifting within two to three years.
  • The bar area is always in milk stains, coffee stains and steam, and the material surface must be dense to be wiped clean with a damp cloth; materials with high porosity are difficult to remove once they absorb pigments.
  • The seating area is a space for close proximity stay, the background wall should have 'a solid color from a distance and details up close', matte surface is more durable than glossy surface.

Relevant Cases and Guidelines:Coffee Shop Entrance Case · Coffee Bar Counter Case · Coffee Backdrop Wall Case

👗Clothing and retail

Material system:Flexible Stone (South Island Aged Trace / Cement Casting Plate / Carved Stone / Moonstone) · Wooden Cladding Panel

  • The first principle of backdrop wall is 'step back to the background position': the color of the product itself is strong, and the wall reflection or saturation is too high, it will compete for the view with the product.
  • Fixing components for the display system (hanging rods, shelves, light tracks) must pass through the panel into the substrate and avoid panel joints; fixing points must be marked during the layout stage.
  • When the height is limited, use vertical textures to make it appear taller, which is the cheapest method to increase height—it's cheaper than changing the ceiling and doesn't take up height.

Relevant Cases and Guidelines:Clothing entrance cases · Clothing background wall cases · Commercial retail case · Retail storefront case

🏢office and skyscraper

Material system:Flexible Stone (Marble Limestone / Cave Stone) · WPC Grating Board · Wood Grain Wall Panel

  • The processing logic for tall lobbies is consistent with that of hotel lobbies: the higher the height, the greater the importance of joint layout is over the color itself.
  • The reception background wall carries the corporate image, usually hanging a logo or identification; when laying out, mark the outline of the identification together, and avoid the fixed parts from the board joints.
  • Office lighting is mixed with panel lights and spotlights, matte surfaces can avoid visual fatigue caused by large-area reflection.

Relevant Cases and Guidelines:Commercial retail case · Material selection guide · Office building high-ceiling lobby

💆Beauty and medical beauty

Material system:Flexible Stone (Star Stone / Marble Pattern Slab) · Wood Grain Wall Panel

  • Cleanliness is the top priority: light color base + low reflectivity surface + less joints, natural and clean feeling; avoid the cold and hard feeling caused by too heavy gray tones
  • The nursing room should be mainly soft diffused light, and the guests are mostly lying down. The bright surface materials will reflect the light source into the eyes, and the low reflection surface is more suitable.
  • Alcohol, formulations containing active ingredients, and frequent disinfection will act on walls over the long term; materials must withstand daily wiping and not be corroded.

Relevant Cases and Guidelines:Cases of beauty and medical beauty

📚Culture and education

Material system:Flexible Stone (Adobe / Reed Soft Stone) · Wood Grain Wall Panel

  • Two baseline items are not bonus points: do not leave sharp angles (both positive and negative angles are filled with matching end caps), do not leave easy-to-fall-off parts (full adhesion, no hollowing).
  • Formaldehyde emission amount is required to meet the E1 grade limit of ≤0.124 mg/m³ according to GB 18580-2017, and the classification marking is based on GB/T 39600-2021.
  • Avoid strong glare and hard reflective surfaces in classrooms and reading areas to reduce interference with writing, projection, and reading; acoustic insulation is executed according to GB 50118-2010.

Relevant Cases and Guidelines:Cultural education cases · Qualification certificates and test reports

🎭Leisure and entertainment

Material system:Flexible Stone (Rough granite / Bread stone / Printed slate)

  • The judgment order is opposite to other businesses - first look at the reflection, then look at the color: in low light spaces, the spotlight is used for key lighting, and the bright surface will reflect the light spot into the eyes of the guests.
  • Backlighting for wine racks and light strips requires drilling holes and routing wiring in the wall. During layout, determine the hole positions together with the light strips and avoid panel seams; wall-washing light will not accentuate this area.
  • Dark walls will weaken the joints, but a certain wrong platform is more obvious, so it is even more important to align the joints and determine the starting point.

Relevant Cases and Guidelines:Leisure and entertainment cases · Food & Beverage Space Cases

🏗️Building exterior wall and renovation

Material system:Flexible Stone (Rough granite / Printed soft stone / New line stone) · PU Stone Skin Panel

  • There are two sets of construction specifications for indoor and outdoor: outdoor must use weather-resistant adhesive, waterproof and drip edge, and the indoor method will start to curl at the edges in two or three years.
  • The masonry and thermal insulation wall does not have the bearing conditions for hanging stone, and the weight per square meter of the material directly determines whether this wall can be made.
  • Vertical texture raises the building visually, and horizontal texture makes the shorter building look more pressed – this is the first principle of exterior wall layout.

Relevant Cases and Guidelines:Building exterior wall and residential cases · Material actual shooting · PU Stone Skin Panel

Common Questions (FAQ) about Scenario Solutions

The following are the most frequently asked questions by the project party when doing scene solutions.

What is the difference between scenario solution and product catalog?

The product catalog answers 'what materials', the scenario plan answers 'which types should this space use, why, and how to verify'. The judgment criteria for the same wall in different business models are not the same - hotel guest rooms must first pass the load-bearing test of the light partition, the restaurant sign must first pass the weather resistance test, and leisure and entertainment must first consider the reflection. This page separates these three things according to the space scene.

How many materials can be used at the same time in a project?

The common practice is to use zoning. For example, in villa projects, indoor use wooden decorative panels, and use flexible stone with weather-resistant treatment for partial exterior walls, leaving joints at the corner, and not directly intersecting the two methods. Using materials of the same color scheme in zones is more textured than using one type, and does not increase too many material types.

How to judge which material my project should use?

Proceed step by step: first, examine the subgrade (strength, flatness, moisture content) to determine if it can be done; then, look at the design (curved surfaces, columns, irregular shapes) to decide what to do; then, consider the location (indoor / semi-outdoor / wet area) to determine how to do it; finally, consider the aesthetics to decide what it should look like. This order cannot be reversed.

What information is needed for scenario solutions?

Floor plans and elevation drawings, floor height and substrate material, wet/dry zone descriptions, whether there are curved or irregular shapes, and the destination market (involving export compliance documents) are usually required. The more complete the information, the more specific the material combination recommendations.

What material is suitable for the renovation project of the old city area?

Prioritize lightweight, adhesive, and boneless materials (flexible stone or PU stone skin). The original wall must be firm and free of hollows to be covered directly, and old tile surfaces are also acceptable; but hollows and loose sanding parts must be knocked out and redone - this step cannot be skipped, as any material pasted on hollowed subgrade will also bulge.

What are the differences in scene selection for export projects?

The scene logic is consistent, the difference lies in the compliance documents: the EU market usually requires CE, RoHS, and REACH reports, while other markets generally recognize SGS or the performance and environmental protection reports of the National Inspection Center. In addition, the packaging for export should be designed according to the mode of transport to avoid deformation of the large panels when they are packed together.

Plan communication and samples

Enterprise name
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
Email
19136341389@163.com
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Materials required for the plan
Plan and elevation drawings · Floor height and base material · Dry and wet zoning · Whether there is a curved shape · Target market
Can provide
Material combination suggestion · 20×30cm physical samples · Specifications and inspection reports · Construction node suggestions
Relevant Information
Selection Guides · Project Cases · Certificates & Test Reports · Contact Us
Diameter specification
The approach on this page is for common industry specifications, specific to the product file, on-site conditions, and contract agreement; combustion performance and environmental grade are based on the effective inspection report of the selected model.

Match material system according to spatial scenario

Each space has unique requirements for traffic, humidity, fire safety, and aesthetics. IGOODS provides a comprehensive wall decoration solution for different scenarios with the "material + design + engineering + delivery" integrated model.

Why choose IGOODS for scene planning?

01

Complete material system

Flexible Stone, PU Stone Skin, Wood Paneling, WPC Lattice, Same Color Cabinet Door, Stone Paint Six Major Products Cover Most Wall Demands.

02

Rich experience in scenarios

Delivered across hotel, homestay, commercial, renovation, and other project types, with familiarity in the fire safety, construction, and acceptance requirements of different spaces.

03

From material selection to delivery

Not just selling materials, but also providing full-process services such as design coordination, sample making, project connection, and delivery.

IGOODS hotel space wall decoration effect

Not sure which material is suitable for your project?

Tell us the space type, area and style intention, and the IGOODS consultant will provide material recommendations and quotation plans within 1 working day.

Free consultation / Obtain a sample book
Contact phone number Product Catalog Free Sample
WeChat ID copied