
Hotel entrance facade
Includes cases of hotel entrance facade and exterior wall of IGOODS. The page explains that although the entrance is a 'gateway', it is essentially a semi-outdoor interface: the adhesive must be replaced with a weather-resistant type, the edge must be waterproof and drip-proof, and using indoor methods is the most common reason for rework. And give verifiable control points: the levelness of the base layer is ≤3mm when measured with a 2m ruler, the outline of the signboard and light box should be reserved once during the layout stage to avoid the board joint, product performance according to JG/T 540-2017, fire performance according to GB 8624-2012 classification.
The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.
- Cases implemented
- 1each
- Covered city
- 1each
- Involved part
- Shopfront, canopy pillar
- Check items on this page
- 6Item ·6Item basis
Case index
The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.
| Case | City | Main material. | Construction area |
|---|---|---|---|
| Hotel shopfront · Gold plate real shooting case | Nanchang City | Gold plated board (gold) | 140 ㎡ |
When viewing these cases, it is recommended to check these 6 items.
Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.
- The storefront is the entrance of the hotel, the material must have a clear direction
The hotel shopfront undertakes brand identification and first impression, the material must have a clear texture direction, and cannot rely on later soft decoration to remedy - The semi-outdoor and outdoor interface must be weather-resistant
The adhesive and edge treatment under the eaves and outdoor parts are different, and must be distinguished according to the part, and the edge must be waterproof and drip treatment - Canopy, signboard, and sign system concentrated
The fixed points on the hotel entrance are the most, during the layout stage, the outline should be reserved all at once to avoid the fixed parts pressing on the board joints. - Nighttime lighting is the main viewing condition.
The peak arrival time at the hotel is after dusk, and the evaluation of the entrance mainly occurs at night. The texture under the washing wall light is more important than that during the day. - A gap should be left at the junction of metal and stone.
Metal, glass, and stone are commonly used in hotel entrance combinations, and a glue seam or an additional closing piece should be left between the two hard materials. - High cleaning frequency, priority to be given to dirt resistance.
The facades along the street will accumulate dust, and the material should be able to withstand regular water washing and neutral detergent operations.
Key indicators and acceptance criteria
The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.
| Project | Reference value / Practice | Based on |
|---|---|---|
| Substrate flatness | 2m Rule inspection, gaps ≤3mm | ★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels |
| Adhesive agent. | Weather-resistant adhesive is used under the eaves and outdoor sections. | ★Engineering experience; select according to product instructions |
| Edge waterproofing. | Do waterproofing and drip treatment at the canopy, door frame, and corner. | ★Project experience |
| Reserve fixed points. | Sign, canopy, and guide system outline reserved in one go during layout stage | ★Project experience |
| Product standards | Performance requirements for flexible artificial stone facade materials | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Combustion performance | Graded according to GB 8624-2012, the detection report of the selected model is taken as the standard. | GB 8624-2012 Classification of Combustion Performance of Building Materials and Products |
Common problems (FAQ) with hotel entrance facade
The following are the most frequently asked questions in the design and procurement stages of this type of project
Can the hotel entrance facade use the same material as indoors?
The material can be the same, but the construction must be changed: the entrance is semi-outdoor, and weather-resistant adhesive and waterproofing and dripping edges must be used. If the method is not changed, it will start to buckle at the edges in two or three years.
When should the sign and canopy be positioned?
During the layout stage. The fixing parts must be inserted into the base layer, avoiding the board joints, and it is easy to pierce the board or press on the joints when installing the sign after the wall is done.
How to ensure the night effect of the entrance?
Choose a matte textured layer to allow the wall washing lights to form a transition of light and dark differences in height. The bright surface only remains as a light spot at night, which instead makes it look cheap.
How often does the canopy need to be maintained?
Daily maintenance mainly involves regular washing. After the rainy season, check for any signs of cracking or water leakage at the edges and sealing parts.
How to join the metal edge strip and stone?
The two hard materials do not collide directly. Leave a glue seam in the middle or use a closing piece to transition, with the color mainly matte dark to avoid stealing the show.
What inspections need to be done for the exterior wall project?
The standard is the combustion performance report (GB 8624-2012) and the product performance report (JG/T 540-2017); for export projects, additional CE, RoHS, and REACH files are required.
Related pages and requests
Overview of hotel and inn cases·Hotel lobby case·Building exterior wall and residential cases·Qualification certificates and inspection reports·Selection Guide
Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.