
Coffee Wall
Collection of AIGOODS coffee and dessert shop wall case. The page description states that the seating area is a space for close and long-term stay, the texture and feel of the wall will be carefully seen, so a matte material with 'dull color from a distance and details up close' is needed. And here are the verifiable control points: the flatness of the base layer is measured by a 2m ruler gap ≤3mm (the slanting segment of the spot light needs to be reviewed in detail), the hanging fixture should avoid the board joints and pass through the base layer, and the flammability is graded according to GB 8624-2012.
The following cases come from actual engineering projects of IGOODS, which can be cross-referenced with product details and material selection guides.
- Cases implemented
- 1each
- Covered city
- 1each
- Involved part
- back wall, booth area
- Check items on this page
- 6Item ·6Item basis
Case index
The table lists the cases of this type by project, city, main materials and construction area, which is convenient for quick positioning by scale and material. The case detail page contains complete material selection basis and construction records.
| Case | City | Main material. | Construction area |
|---|---|---|---|
| Dessert shop background wall · Rammed earth board real case | Foshan City | Rammed earth (rammed earth board) | 150 square meters |
When viewing these cases, it is recommended to check these 6 items.
Every item comes from a place where a problem has occurred in an actual project. The order of checking is also very important - the judgment of the base and shape comes first, followed by the color.
- The back wall needs to support the space's atmosphere at close range
The seats in the coffee shop are mostly for close-range stays, and the texture and feel of the back wall will be carefully examined. From a distance, it is a base color, and up close, materials with details are more durable to look at. - The wall in the seating area will be leaned on and rubbed
The wall next to the booth and the long table is a high-frequency contact surface, and a dense, easy-to-clean surface is a basic condition. - The fixation of the sign and decorative paintings
The back wall often hangs paintings or brand walls, and when laying out, fixed points should be reserved to avoid conflicts with the board joints. - Smoke and steam around the bar
The steam and milk stains from the coffee machine will spread to the wall near the bar, and the material needs to be able to withstand daily wiping. - Revealing spotlights and light strips are the main source of lighting.
Oblique lighting of spotlights will amplify the undulations and seam misalignment of the base layer, which is particularly critical for quality inspection in this industry. - Don't want to damage the wall when replacing the display after the later stage.
The display position of the background wall will adjust with the seasons, and it is more convenient to reserve replaceable conditions than to redo the entire surface.
Key indicators and acceptance criteria
The table lists the indicators, reference values and basis that can be checked for the type of this project.★Project experienceIt indicates the range of common practices in the industry and is not used as a reference for national standard data; those with standard numbers can be directly verified.
| Project | Reference value / Practice | Based on |
|---|---|---|
| Substrate flatness | 2m Rule inspection, gaps ≤3mm; pay special attention to the slanting section of the spot light | ★Engineering Experience; Can be compared with GB 50210-2018 for allowable deviation in the installation of decorative panels |
| Reflection | Prioritize matte low-reflective surfaces to avoid competing for attention with the display and spotlights. | ★Project experience |
| Hanging point. | Avoid the gap between the decorative painting and the brand wall fixing parts, and pass through the base layer. | ★Project experience |
| Wear-resistant | Neutral cleaner + soft cloth, do not use steel wool | ★Project experience |
| Combustion performance | Graded according to GB 8624-2012, the detection report of the selected model is taken as the standard. | GB 8624-2012 Classification of Combustion Performance of Building Materials and Products |
| Indoor environmental pollution | Commercial buildings are controlled according to Class II civil buildings | GB 50325-2020 Indoor Environmental Pollution Control Standard for Civil Engineering Construction |
Common problems (FAQ) of coffee background walls.
The following are the most frequently asked questions in the design and procurement stages of this type of project
What texture should the coffee shop background wall have?
Matte, with a fine texture. The seats are for close contact, and the wall is carefully observed: from a distance, it should have a base color, and up close, it should have details; too smooth will look empty.
Will the spotlights make the wall look like it's blooming?
It will amplify the undulations and seam discrepancies of the base layer. The slanting lighting is a common lighting method in cafes, so the flatness acceptance of the base layer is more important than in other businesses.
How do I secure a painting on the background wall?
When arranging, mark the painting location first, pass the fixing piece through the base layer, avoiding the board seams. If you want to change the position later, try to adjust near the original fixing points.
Will the wall behind the booth get dirty?
Yes. The wall in the seating area is a high-frequency contact surface. When selecting materials, 'waste resistance' is treated as a hard requirement, and the dense surface layer can be wiped clean with a wet cloth.
Can the background wall use the same style as the door header?
Yes, and it will be more unified. The door header is constructed according to semi-outdoor specifications (weather-resistant glue + waterproof edge), and the indoor construction follows the conventional method, the same material style can be used.
Will adjusting the display during the change of seasons damage the wall?
If conditions for replacement are reserved during layout, it will not. It is recommended to design the hanger in a removable form, and only the hanging panel needs to be moved during the change of seasons, not the main material.
Related pages and requests
Overview of coffee and tea beverage cases·Coffee Shop Entrance Case·Coffee Bar Counter Case·Clothing background wall cases·Selection Guide
Diameter specification:The indicators listed on this page include★Project experienceThis is a common practice range in the industry, used for estimation and self-check, not as a national standard data reference; those with standard numbers are standard files that can be verified. Material parameters are confirmed according to product archives and orders, and combustion performance and environmental grade are based on the effective inspection report of the selected model.