Construction case of rough rammed earth (New South Red) wall surface in a 960㎡ Chinese-style hot pot restaurant

The Chinese-style hot pot restaurant project is located in Kangding City, Sichuan Province, and the main wall material selected is rough rammed earth flexible stone (New South Red), used for the main walls of the hot pot restaurant's lobby, booth area and corridor. The construction area is about 960 ㎡ (including public areas), completed by 4 people in 17 working days.

Published time:

Introduction

The Chinese-style hot pot restaurant project is located in Kangding City, Sichuan Province, and the main wall material selected is Coarse rammed earth Flexible Stone (New South Red), used for the main walls of the main hall, booth area, and corridor of a hot pot restaurant, with a construction area of about 960 ㎡ (including public areas), completed by 4 people in 17 working days. This article explains the material selection basis, quantity and schedule estimation, construction control points, application photos, and common questions all at once.

  • Project: Chinese-style hot pot restaurant · hot pot restaurant main hall, booth area and corridor main walls
  • Location: Kangding City, Sichuan Province
  • Main material: Coarse rammed earth flexible stone (New South Red)
  • Construction area: approx. 960 ㎡
  • Schedule: 17 working days / 4 people
  • Implementation standards: JG/T 540-2017

Project file

Project Content
Project nameChinese-style hot pot restaurant wall material—red Rammed earth board flexible stone application case (Kangding)
Space typeFood & Beverage Spaces
Business typeChinese-style hot pot restaurant
CityKangding City, Sichuan Province
ScaleMain hall, 22 tables + 8 booth groups
Construction locationMain walls of the hall, booth area and corridor in a hot pot restaurant
Main material.Coarse rammed earth flexible stone (Xinnanhong)
Construction areaApprox. 960 ㎡ (including common areas)
Construction period17 working days
Number of construction workers4 people
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"

1. Customer industry usage scenario: the real wall requirements of a Chinese-style hot pot restaurant

  1. A large full wall must not look empty The main hall feature wall is often more than ten meters long, so the material must either have sufficient texture layering or be divided by shaping. The layered texture of rammed earth shows details up close, while at a distance it reads as a stable warm-colored surface, so it works at both viewing distances.
  2. Relationship between ceiling height and lighting in hot pot restaurants The ceiling of a hot pot restaurant usually needs to conceal exhaust and fresh air ducts, so the clear height is compressed. Red tones in low-clear-height spaces can easily feel oppressive, so a light or dark wood ceiling is needed for balance—this is something that must be considered together when choosing colors.
  3. Curved partitions are the main formal language Chinese-style hot pot restaurants commonly use curved partitions to divide dining areas. Traditional hard materials can only be pieced together in sections, and joint lines appear densely along the turns of the arc; flexible materials can be bent and applied directly, with a continuous curved surface, which is also the core reason this project chose it.
  4. The edges of circular doorways are the most likely to look bad The edges of circular openings and moon gates are focal points of sight; on-site cutting and butt-joining will expose the panel backing and result in uneven seams. Matching trim pieces in the same color as the main material must be used along the curve.
  5. Long-term effects of cooking fumes and steam The steam output of hot pot is far greater than that of ordinary dining. Wall materials must not absorb water, otherwise repeated moisture exposure will accelerate the aging of the adhesive layer; at the same time, the surface must withstand daily wiping with neutral cleaners.
  6. Local renovation later without wanting to redo the entire surface Walls in dining spaces often undergo partial adjustments after 3–5 years. If seam lines and termination positions are fixed during the layout stage, individual panels can be removed and replaced starting from the termination point, without having to tear down the entire wall.

II. Material comparison: why choose "coarse rammed earth flexible stone"

When comparing wall materials side by side, what really determines the selection is often not "which one looks better," but rather whether the base layer can bear the load, whether the schedule can be compressed, and whether the shape can be achieved.

Comparison item Coarse rammed earth flexible stone Tile / Slab. Natural stone. Traditional wood veneer
Weight per square meterApprox. 4.0–4.4 kg/㎡Noticeably heavier, substrate reinforcement requiredHeaviest; mostly requires dry hangingIncludes thicker base coat
thickness2.5–3 mm6–12 mm15–30 mmIncludes base coat 15 mm or more
Curved surface and columnCan be curved within a certain radius, covering the entire surfaceSmall pieces must be cut and pieced together, with dense jointsRequires waterjet processing; cost and lead time increaseRequires steam heat bending or slitting
Construction methodNo skeleton required, full adhesion after leveling the baseSpecial adhesive, high requirements for joint-gap processMostly dry-hung, requires embedded partsRequires furring strips or a backing board
Moisture-proof and mold-proofDoes not absorb water, does not swellIt does not absorb water itself, but dirt easily collects in the seamsSome stone absorbs waterProne to swelling and mold when damp
ScheduleShort, no wet work or paintingMediumLengthLength
Points to noteNot recommended for ground installationNot good at curved surfacesNot good at special shapesNot good at wet areas

Description: The values in the table above are common ranges for various materials, used to illustrate applicable boundaries and not constituting a ranking of any material. For this project, coarse rammed earth flexible stone was ultimately selected because the large-area red rammed earth serves as the main tone, with a wooden grille ceiling reining in the overall color palette.

2.0 Why Coarse rammed earth flexible stone

The hall of a hot pot restaurant has a large area and high ceilings, and the overall look of the entire wall directly determines the first impression. At this scale, red rammed earth board can provide sufficient material depth without reflecting the lighting into a single sheet like glossy stone; at the same time, it is lightweight and can be bent and applied in one piece on curved partitions and circular door openings, keeping the shape outline continuous.

2.1 Three questions for selection

Condense the selection into three questions, and the direction can basically be set:

  1. Is the wall curved or column-shaped? Yes → prioritize flexible materials that can bend; No → then compare weight and construction period.
  2. Can the substrate bear the weight of the stone? Cannot (lightweight partition walls, old walls, insulated walls) → prioritize flexible materials; can → natural stone is also an option.
  3. What kind of atmosphere does the space want? Vertical wood grilles and horizontal rammed earth texture form a directional contrast.

The answers to the three questions for this project: large areas of red rammed earth set the main tone, with a wooden grille ceiling holding the overall color palette together; the circular doorway and curved partition are fully wrapped with curved panels in one piece; and the vertical wooden grilles contrast in direction with the horizontal rammed earth texture. Therefore, coarse rammed earth flexible stone was selected.

3. Configuration plan

3.1 Material specifications and packaging

Specifications (mm) Thickness (mm) Approx. weight per panel (kg) Wooden crate packaging (pieces/crate) Area of wooden crate after packaging (㎡) Weight after packaging approx. (kg)
600×12002.5–33–3.2300216820
1200×24002.5–312.5–131002881200

Optional colors: white, New South Red, Old South Red (other colors can be customized).

Texture and light perception notes: the layered feel of rammed earth texture comes from surface height differences, and angled lighting creates natural light-dark transitions.

3.2 Allocation by space

Different parts of the same project do not have the same requirements for materials. The table below breaks down the actual space of a Chinese-style hot pot restaurant and explains why each part is specified this way.

Space / Location Area share ★ Material usage Why set it this way?
Main viewing surface (the first wall directly facing you when entering)20% or soFull-piece laying, seams kept away from the centerWhere the line of sight rests longest, the overall appearance is most complete
Side walls and passagewaysabout 35%Conventional installation, with joints aligned continuouslyLarge area, with the focus on smooth, continuous seams
Curved wall / partitionabout 15%Full-piece curved wrappingPiecing curved surfaces into small pieces creates dense diagonal seams
Column wrappingabout 8%%Full-piece wrapping on the column surface, with seams kept at the sides and rearThe key is that no seams are visible from the front
Door openings and window casingsabout 10%Use matching termination pieces; do not butt-join on siteCut edges easily expose the panel backing
Form and local areasAbout 12%%Custom-shaped panels according to drawingsOn-site cutting precision for irregular pieces is insufficient

★Description: The proportions in the table above are common distributions for similar restaurant/hotel spaces and are used to estimate material quantities for each part; actual quantities are subject to on-site measurement and layout drawings.

3.3 Estimation of Quantity and Construction Schedule

The calculation process is given below so it can be reviewed according to your own project's basis.

Project Calculation formula Result
Net installation areaOn-site measurement (including public areas)Approx. 960 ㎡
Material preparation area960 × (1 + 12% loss)Approx. 1075㎡
Number of wooden crates1075 ÷ 216 square meters per box, rounded upApprox. 5 boxes
Substrate treatmentLeveling, repair, primer2–3 working days
Layout setting-outSnap lines, align seams, set the starting point1-2 working days
Adhesive mounting4 people in a group, average daily 60–100 m² ★Approx. 13 business days
Finishing and acceptanceEdge trim, cleaning, acceptance1-2 working days
TotalConfigure for 4 people17 working days

3.4 Material List

Auxiliary materials Purpose Description
Special adhesiveMain material for full-surface bonding methodSelect according to product instructions; use weather-resistant type for outdoor or damp areas
Interface agentSubstrate sealingSelect according to substrate material
Edge trim / internal and external corner piecesCorners and closuresSame color family as the main material; prioritize matching accessories rather than on-site cutting
Joint filler materialJoint sealingClose to the main material color number to avoid overly prominent joint lines
DetergentCompletion cleaningNeutral cleaner; strong acids and alkalis prohibited

IV. Construction process and acceptance control points: on-site practice for "coarse rammed earth flexible stone"

4.1 Seven steps

  1. Substrate inspection: Moisture content, flatness, and strength must all pass. Flatness is checked with a 2 m straightedge; sanding and loose layers must be removed down to a solid substrate, and hollow areas must be knocked out and redone.
  2. Substrate treatment: Walls with high moisture content require a sealing primer first; different interface agents are selected for different substrates.
  3. Layout setting-out: Put the layout plan on paper before starting work; mark door and window openings, switches, sockets, and internal/external corner positions; align seam lines across different walls in the same space where possible.
  4. Cutting processing: Cut to layout dimensions; cover cut edges with trim or pressure strips; determine opening positions at the layout stage.
  5. Full bonding installation: The full-surface bonding method is recommended, starting from the main viewing face and progressing to both sides and upward; apply along the arc direction at curved areas.
  6. Finishing treatment: Internal and external corners use matching trim pieces; junctions with door frames, ceilings, and floors are executed according to the node drawings.
  7. Cleaning acceptance: Use a neutral cleaner to remove residual adhesive and fingerprints, and check item by item according to the acceptance checklist.

4.2 Acceptance Control Sheet

Inspection items Control points Criterion
Substrate flatness2 m straightedge inspectionGap not exceeding 3mm ★
Substrate moisture contentSeal damp areas firstNo obvious moisture marks, no water seepage
Joint line alignmentAlign joint lines within the same spaceSmooth and free of steps by visual inspection
Curved-surface installationDirection along the arcNo obvious sharp folds, no edge lifting
External corner closureUse matching termination piecesNo exposed board bottom, consistent color
HollowingSpot-check by tapping each pieceHollowing rate not exceeding 5% ★
Surface cleaningNeutral cleanerNo residual glue, no scratches

The specific allowable deviation values shall be subject to the standards and contract terms of the project location; the table above shows the common industry practice ranges.

4.3 Special methods for arc and column

Curved walls, columns and irregular corners are where flexible materials differ most directly from traditional finishes. There are several points that must be confirmed in advance for the installation method:

Location The method. Items to confirm in advance
Large-radius curved wall (R ≥ 2m)Full-piece curved application, seam following the curve directionArc radius, panel thickness, ambient temperature
Small-radius curved wall (R < 2m)Test the bend first; when there is obvious springback, switch to narrow-strip splicingMust first test bending with a physical mock-up
Cylindrical column claddingFull-piece wrapping, seam left at the side rearColumn diameter and whether there are embedded parts on the column surface
Arches and door openingsContinuous curve, use matching termination piecesDoor opening squareness
Internal and external cornersUse matching termination pieces; do not butt-join on siteWhether the color of finishing pieces is consistent with the main material

4.4 Common problems and avoidance

Phenomenon Reason Workaround
Joint misalignmentUneven substrate, cumulative error block by blockFirst snap lines to control continuous joints, and start installation from the main sightline
Curved-surface edge liftingRadius smaller than the material's usable rangeTest bending before installation to confirm; change to narrower strips if necessary
External corner showing through to the substrateOn-site cutting and butt-joiningUse matching inner and outer corner pieces
The light strip reveals the jointsJoint conflicts with the position of the light stripDetermine the joints together with the light strips during the layout stage
Color difference concentrationMixing different batchesOrder enough at once for the same batch, and mix materials before installation
HollowingBase-layer sanding and insufficient adhesive dosageSubstrate treatment in place, full-adhesion installation

4.5 Construction tools and personnel allocation

Project Configuration Description
Measuring tools2 m straightedge, level, tape measure, chalk lineBase-layer acceptance and chalk-line layout
Cutting toolsUtility knife / board cutting knife, straight rulerOn-site cutting according to layout dimensions
Mixing toolsElectric mixerMix the adhesive according to the specified ratio
Adhesive application toolsNotched trowelFull-surface bonding method: control consistent adhesive layer thickness
Compaction toolPressure roller / rubber malletRemove air bubbles and ensure full adhesion
Cleaning toolsSoft cloth, neutral cleanerCompletion cleaning
StaffingAdhesive mounting, 2–4 people per team ★This project is staffed with 4 people
Daily production capacity per group60–100 square meters per group ★Related to substrate conditions and modeling complexity

★Description: Staffing and daily capacity are common industry ranges, used to estimate the construction period; actual efficiency is affected by substrate conditions, shape complexity, floor height and on-site access conditions.

V. Image display and application description

5.1 Enclosed Booth

Enclosed booth seating, warm red vertical-grain curved wall and round tables
Figure 1 · Enclosed booth seating, warm red vertical-grain curved wall and round table

5.2 Reception Area

Reception area, warm red curved wall and dark front desk
Figure 2 · Reception area, warm red curved wall and dark front desk

5.3 Window Seat

Window-side booth, warm red curved partition wall and circular window opening
Figure 3 · Window-side booth, warm red curved partition wall and circular window opening

5.4 Circular door

Circular doorway, warm red wall and courtyard end view
Figure 4 · Circular doorway, warm red wall and courtyard end view

5.5 Self-service condiment area

Self-service condiment area, warm red vertical-grain background and continuous countertop
Figure 5 · Self-service condiment area, warm red vertical-grain backdrop and continuous countertop

5.6 Entrance corner

Entrance corner, warm red curved wall with reception desk
Figure 6 · Entrance corner, warm red curved wall and reception desk

5.7 Courtyard Walkway

Courtyard passage, warm red wall columns and zigzag ceiling lights
Figure 7 · Courtyard passage, warm red wall columns and zigzag ceiling lights

5.8 Round Hole Door

Circular opening door, warm red wall with wooden grille and bonsai
Figure 8 · Round arched doorway, warm red wall with wooden grilles and bonsai

5.9 buffet area

Buffet area, warm red textured background and tableware display
Figure 9 · Buffet area, warm red textured backdrop and tableware display

VI. Communication and confirmation process

The following are several questions confirmed by both parties during material selection and construction, organized in the order of the conversation.

  • Owner: If the entire lobby wall is red rammed earth, will it feel oppressive?
  • Our side: If red rammed earth is used across the entire wall, it will indeed feel heavy. It is recommended to use a light-colored or dark wood grille ceiling to hold it down and a dark floor to achieve visual balance.
  • Design party: The curved partition has a radius of about 1.8 meters—can it be done?
  • Our side: 1.8 meters is within the range that can be directly bent and applied, but it is recommended to send a sample section first to test bending and confirm the springback before ordering.
  • Construction party: How should a circular door opening be finished at the edges?
  • Our side: Use same-color closing strips along the curve; this is neater than on-site cutting and butt-joining, and won't expose the panel underside.

Scope statement: The above is a written summary of the communication content, used to explain the decision-making process; it does not represent a commitment to results, and the contract terms and on-site conditions shall prevail.

Seven, usage effects and daily maintenance

7.1 Perception and light environment

The layered feel of the rammed earth texture comes from the height differences in the surface, and lighting at an angle creates natural light-dark transitions. The same wall looks different under different color temperatures: warmer under warm light and more neutral under cool light, which is also why we recommend sending physical samples first to compare under actual lighting.

7.2 Daily maintenance

Project The method. Note
Daily cleaningWipe with clean water or neutral detergentDo not use strong acids or strong alkalis
Oil stain treatmentNeutral cleaner + soft clothDo not use steel wool
Localized damageIndividual panels can be replacedReplaceable conditions were retained during layout
Damp areasMaintain ventilationDoes not absorb water, does not swell
Outdoor areasRegular washingExecute according to the design scope

7.3 Post-delivery Recheck Sheet

Review items Suggested timing Points of concern
Joints and closures7 days after handoverWhether there is lifting or cracking
Hollowing30 days after handoverSampling and tapping inspection
Color consistency30 days after handoverComparison across different walls and different floors
Cleaning statusDailyWhether there are stubborn stains

7.4 Intersection with Adjacent Materials

Wall materials rarely exist alone; there will always be neighbors such as ceilings, floors, wood veneer, metal parts and glass. How well the junctions are handled directly determines whether the elevation looks "clean" or "fragmented."

Adjacent materials Transition method Note
Ceiling / suspended ceilingPress the edge with a top trim strip, or leave a 3–5 mm revealJoint width must be consistent over the full length
Floor / skirtingSkirting line presses the lower edge of the panelDo not let the bottom edge sit directly on the floor, to avoid dragging wear
Wood finishTransition within the same color family, with the joint left at an internal cornerPlacing the two materials on the same wall requires comparing color differences first
Metal edge trim stripMetal strips press the seam, with the direction parallel to the grain directionColors are mainly matte dark tones to avoid stealing the show
Glass partitionUse a pressure strip for finishing, leaving a caulking gap between the glass and the panelCut edges of the panel need to be covered with trim
Door and window casingsUse matching termination pieces; do not butt-join on siteDoor opening squareness directly affects the finishing result

7.5 Cost Estimation

The cost of a wall consists of three parts: main material + auxiliary materials + labor. The budget estimate basis is as follows (◆budget estimate, not an actual measured bill):

Composition Scope Influencing factors
Main material.Material preparation area approximately 1075 ㎡ ÷ 216 ㎡ per crateColor, thickness, specifications, batch
Auxiliary materialsAdhesive + primer + trim pieces + groutSubstrate conditions, termination complexity
ManualMounting area × labor cost per unit areaForm complexity, floor height, proportion of special shapes

◆Estimate: Specific unit prices vary with pattern, thickness, order quantity, and construction conditions; a wide range is normal. This article does not provide a single quotation to avoid misleading; for project pricing, please provide the area, pattern, and delivery location.

VIII. Common questions (FAQ)

Below are the questions most frequently asked about material selection and construction in this project.

Is coarse rammed earth flexible stone suitable for spaces such as dining areas?

Suitable. The layered feel of the rammed earth texture comes from the surface height variation, and natural light-to-dark transitions appear when light strikes at an angle. This project uses it for the main walls of the hot pot restaurant's lobby, booth area and corridor. Large areas of red rammed earth set the main tone, while the wood grille ceiling holds the overall color palette in check.

Can curved walls and column cladding be done in one continuous piece?

Yes. The material has a certain flexibility and can be bent within a certain radius, so columns, curved walls and irregular corners can achieve full-panel wrapping with continuous seams. The specific usable radius depends on the selected model, thickness and substrate conditions; it is recommended to first test-bend a physical sample at the corresponding curvature to confirm.

How long does the schedule generally take?

This project is approximately 960 ㎡, staffed with 4 people, and completed in 17 working days (including substrate preparation and finishing). The installation itself accounts for about 13 working days, with the remainder for substrate work, layout marking, and acceptance inspection. The main variable in the schedule is substrate condition—substrate rework will directly eat into the time saved on installation.

Can it be used in damp areas?

Yes. The material itself does not absorb water, and after construction the wall surface is not prone to dampness or mildew, so it can be used in humid environments and underground spaces. For wet areas such as bathrooms, it is recommended to confirm the specific scope in conjunction with the wet/dry zoning plan.

What about fire performance?

The material has flame-retardant properties; the specific combustion performance ratingshall be in accordance with the valid inspection report of the selected model. If the project has specific requirements for fire rating, please specify before placing an order.

How much difference in texture is there compared to natural stone?

Differences are visible up close: natural stone has naturally occurring random variation, while the texture of Coarse Rammed Earth flexible stone is formed by embossing or printing, giving greater consistency within the same product. From a distance the overall look is similar. When placing natural stone and flexible materials on adjacent walls in the same space, it is advisable to make a small sample comparison first.

Can old walls be renovated by direct pasting?

If the original wall surface is firm and has no hollowing, it is possible; old tile surfaces can also be covered directly. But before construction, each surface must be checked for hollowing, and hollowed areas must be knocked out and redone—this step cannot be skipped.

Does the material have test reports? What standard does it follow?

Execution JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' (issued by the Ministry of Housing and Urban-Rural Development). Environmental protection and combustion performance test reports for the corresponding models can be provided with the goods.

How to confirm color and texture?

It is advisable to request physical samples and compare them under the project's actual lighting before deciding the color number. There are differences between screen display and actual materials; in particular, stone-texture materials look different at different angles and color temperatures.

Can a single damaged panel be replaced later?

Yes. During layout, the seam lines and termination positions have already been determined, and a single piece can be pried out from the termination for replacement. It is recommended to reserve 1–2 boxes of same-batch material as spares at delivery.

IX. Project File and Contact Information

Project Content
Project nameChinese-style hot pot restaurant wall material—application case of red rammed earth panel flexible stone (Kangding)
LocationKangding City, Sichuan Province
Main material.Coarse rammed earth flexible stone (Xinnanhong)
Material seriesRammed earth and cement series
Construction areaApprox. 960 ㎡
Schedule17 working days
Related sectionsProject Cases · Food & Beverage Spaces
Implementation standardsJG/T 540-2017

Similar projects can be found in the Project Cases section; for material specifications and colors see Rammed earth and cement series.


Legend and specification notes

  • ★Project experience = Industry common practice and experience range, not a reference for national standard data.
  • ◆Estimate = Estimated value calculated based on the scale,not an actual measured bill; actual conditions are subject to the contract agreement and site conditions.
  • Material parameters are taken from the corresponding product file; combustion performance, environmental grade, etc. are subject to the valid test report for the selected model.
  • Area, schedule, and quantity are estimates based on industry-scale figures; the calculation process is provided and can be reviewed against your own project's basis.

Find the appropriate wall expression for your project.

Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.

Consulting project material selection ↗
Contact phone number Product Catalog Free Sample
WeChat ID copied