New South Red coarse rammed earth flexible stone

New South Red coarse rammed earth is a flexible stone product in the rammed earth and cement series. Its surface features a New South Red tone and coarse rammed earth texture. It is lightweight, flexible and bendable, suitable for walls in hotels, restaurants, commercial stores, showrooms and other commercial spaces. This page provides specifications and packaging parameters, materials and performance, construction methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Coarse Rammed Earth Release:2026-11-13

Product quick information

  • Product name:New South Red coarse rammed earth flexible stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Rammed earth and cement.
  • Craftsmanship:Rammed earth texture
  • Main tone: South Red tone, warm within the red
  • Texture features:Coarse-particle rammed earth texture, with a hand-rammed feel and obvious surface undulation
  • Recommended scenarios:Homestays, hotels, showrooms, renovation projects
  • Main applications: Building wall

In IGOODS's rammed earth and cement,New South Red coarse rammed earth flexible stoneA style in the "temperature and focal point" direction. It takes an industrial and locally grounded route, suitable for spaces with minimal decoration and a strong emphasis on atmosphere; when applied to actual wall surfaces, its color tension is clear, making it suitable as a local focal surface rather than large-area application.

Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. Names vary by region: soft stone, flexible stone, flexible stone-look panels, and bendable stone basically refer to the same type of product.

The photographed texture characteristics of coarse rammed earth

Observing the real photo details of New South Red Coarse Rammed Earth flexible stone, it can be seen that it has an overall South Red tone, red with warmth. As for the texture, it belongs to the category of "coarse-particle rammed earth texture, with hand-rammed feel and obvious surface undulation." The texture density is evenly distributed on the same piece of material, and the texture performance at the edges and corners is basically consistent with the central area.

Light has a fairly obvious effect on this color: under natural side light, the southern red portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.

Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12002.5-33-3.2300216690×1300×1100820
1200×24002.5-312.5-13100288690×2480×6001200

Optional colors:White, new southern red, old southern red (other colors customizable)

Packaging notes: Wooden crate packaging is the standard method, and shipments can be made in batches according to project progress; export orders can use export wooden crates. The above specifications, weights, and packaging dimensions are for reference only, and the final version is subject to contract confirmation.

Customization notes: The customization scope covers four items: size, color, texture direction and thickness; after the project party provides layout drawings or renderings, the factory can confirm the achievable specifications.

Material and performance parameters

What determines the scope of application for flexible stone is its substrate composition and physical performance. The substrate is a composite of natural mineral raw materials and polymer flexible materials, an inorganic ecological system with no added formaldehyde, suitable for both indoor and outdoor use environments. In terms of physical performance, it features ultra-thin lightness, high flexibility, bendability, and resistance to cracking and deformation, along with fire retardancy, waterproofing and moisture resistance, stain resistance and dirt resistance, and a certain degree of UV resistance and high/low temperature resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For the specific New South Red Coarse Rammed Earth flexible stone product, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.

Key installation and construction points

No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.

Substrate treatment

Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.

Measurement and layout

During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.

Cutting and hole drilling

Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.

Pasting installation

Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.

Compaction and adjustment

Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.

Edge finishing and acceptance

Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.

Which commercial spaces is New South Red Coarse Rammed Earth flexible stone suitable for?

The application of this color in actual projects is relatively concentrated and can generally be grouped into the following types of spaces.

Homestays and resort spaces

Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.

Hotel public areas

In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.

Exhibition and temporary exhibition spaces

Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.

Old renovation and renovation projects

The core constraints of renovation projects are "less demolition, fast installation and low disturbance". Flexible stone can be directly applied over the original finish, and construction can proceed after substrate leveling, making it suitable for renovation while the business is operating.

What product features does New South Red Coarse Rammed Earth flexible stone have?

  • Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
  • Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
  • No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
  • Old walls can be directly covered: Suitable for secondary renovation of existing walls: no need to demolish down to the substrate, which is friendlier for commercial spaces in operation and occupied residences.
  • Convenient on-site cutting: The material can be cut on site and adjusted at any time for dimensional deviations, without relying on factory processing as natural stone does.
  • Same-color matching:The color and texture range within a series is controllable, making it easier to maintain overall consistency during large-area construction.

Project selection and procurement key points for New South Red Coarse Rammed Earth flexible stone

When selecting materials, construction engineering companies, exterior wall engineering general contractors, municipal engineering parties and property developers are most concerned about weather resistance and durability, safety and compliance, and delivery capability for bulk procurement. Flexible stone is designed specifically for outdoor engineering scenarios, focusing on solving the problems of traditional stone in terms of self-weight, falling risk and filing compliance.

The flexible material bonds firmly and has low self-weight, which can significantly reduce the safety risk of stone falling from high-rise facades and meets the safety construction requirements of exterior wall projects. Bulk supply for large projects, expedited production scheduling and on-site technical coordination are supported; exclusive specifications and textures can be customized according to engineering drawings, suitable for large-area exterior wall paving, with flat joints and a unified overall effect.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

Cost-effective stone for large-scale renovation projects and safe decorative materials for high-altitude exterior walls are the main concerns of engineering parties during scheme review.

Frequently asked questions about New South Red coarse rammed earth flexible stone

How is the environmental performance of New South Red Coarse Rammed Earth flexible stone?

Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.

What is the typical lead time?

Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.

How to confirm whether to choose this one or another color pattern in the same series?

It is advisable to also request physical samples of 2–3 candidate color options, compare them under the lighting conditions of the actual space, and then make a decision in combination with the layout effect over a large area. Looking only at a small sample can easily overlook the rhythm of the overall installed surface.

What common specifications does New South Red Coarse Rammed Earth flexible stone have?

The specific available specifications for New South Red Coarse Rammed Earth flexible stone are shown in the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes and supports customization of large slabs, small slabs and special-shaped sizes; actual supply specifications need to be confirmed in combination with the selected thickness and packaging method.

About IGOODS

IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.

Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.

The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. Direct supply from the source factory, with free sample mailing, customization according to drawings, engineering bulk supply, test reports, nationwide shipping, and after-sales technical support.

New South Red coarse rammed earth flexible stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied