Black Coarse Rammed Earth Flexible Stone
Black Coarse Rammed Earth is a flexible stone in the Rammed Earth and Cement series. Its surface presents a black tone and coarse rammed earth texture. It is lightweight, thin, flexible and bendable, and is suitable for wall surfaces in commercial spaces such as hotels, restaurants, commercial stores and showrooms. This page provides specifications and packaging parameters, material and performance, construction methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:Black Coarse Rammed Earth Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Rammed earth and cement.
- Craftsmanship:Rammed earth texture
- Main tone:Deep black tone, calm and restrained
- Texture features:Coarse-particle rammed earth texture, with a hand-rammed feel and obvious surface undulation
- Recommended scenarios:Homestays, hotels, showrooms, renovation projects
- Main applications: Building wall
In IGOODS's rammed earth and cement,Black Coarse Rammed Earth Flexible StoneA style in the "weight and presence" direction. It takes an industrial and locally grounded route, suitable for spaces with minimal decoration and a strong emphasis on atmosphere; when applied to actual wall surfaces, it can quickly establish a visual center of gravity in large spaces and better set off light-colored elements.
As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. In inquiries and searches, this type of product is also often called soft stone panel, flexible imitation stone finish, bendable stone, or ultra-thin flexible exterior wall stone.
The photographed texture characteristics of coarse rammed earth
Observing the real-shot details of the black coarse rammed earth flexible stone, it can be seen that it has an overall deep black tone, steady and restrained. As for the texture specifically, it belongs to the category of "coarse-grain rammed earth texture, with a hand-rammed feel and obvious surface undulations." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.
Light has a fairly obvious effect on this color: under natural side light, the dark portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.
Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.5-3 | 3-3.2 | 300 | 216 | 690×1300×1100 | 820 |
| 1200×2400 | 2.5-3 | 12.5-13 | 100 | 288 | 690×2480×600 | 1200 |
Optional colors:White, new southern red, old southern red (other colors customizable)
Packaging notes: Wooden crate packaging is the standard method, and shipments can be made in batches according to project progress; export orders can use export wooden crates. The above specifications, weights, and packaging dimensions are for reference only, and the final version is subject to contract confirmation.
Customization notes: The customization scope covers four items: size, color, texture direction and thickness; after the project party provides layout drawings or renderings, the factory can confirm the achievable specifications.
Material and performance parameters
What determines the scope of application for flexible stone is its substrate composition and physical performance. The material system is inorganic mineral raw materials plus a polymer flexible substrate, containing no asbestos and no heavy metals, and can be used in indoor spaces with air quality requirements. The material is lightweight and flexible, bendable, and resistant to cracking and deformation; it also offers comprehensive performance in flame retardancy, moisture resistance, stain resistance, and UV resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges for flexible stone as a category of material. For the acceptance of black coarse rammed earth flexible stone in a specific project, the valid test reports for the selected model, the provisions of the supply contract, and the relevant standards of the project location shall govern.
Key installation and construction points
No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.
Substrate treatment
Substrate conditions directly determine the final bonding effect, so the substrate acceptance step cannot be skipped: moisture content, flatness and strength must all pass. When the substrate does not meet the standard, it is better to repair first than to install panels directly.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
What commercial spaces is Black Coarse Rammed Earth Flexible Stone suitable for?
The application of this color in actual projects is relatively concentrated and can generally be grouped into the following types of spaces.
Homestays and resort spaces
Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.
Hotel guest rooms and elevator lobbies
Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.
Exhibition and temporary exhibition spaces
Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.
Old renovation and renovation projects
The core constraints of renovation projects are "less demolition, fast installation and low disturbance". Flexible stone can be directly applied over the original finish, and construction can proceed after substrate leveling, making it suitable for renovation while the business is operating.
What product features does Black Coarse Rammed Earth Flexible Stone have?
- Lightweight dead weight:Compared with natural stone slabs of the same size, the weight of this type of material is an order of magnitude lower, so no separate load-bearing reinforcement is required for the finish.
- Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Batch supply:As a source factory, we can directly handle bulk engineering orders, support expedited production scheduling and on-site technical coordination, and deliver in batches in line with the project schedule.
- Low-maintenance:The finish does not require waxing or special maintenance; daily cleaning with water or a neutral cleaner is sufficient, and color and texture change little after long-term use.
- Project coordination: Can assist in calculating quantities and layout plans according to project drawings, and provide technical coordination during the construction phase to reduce on-site rework.
Project selection and procurement key points for Black Coarse Rammed Earth Flexible Stone
The most common problem at the design material selection stage is: the stone texture in the rendering looks great, but after implementation it is distorted due to seams, color differences or shape limitations. The bendable and cuttable characteristics of flexible stone are precisely intended for locations such as curved walls, columns, irregular door headers and shaped curtain walls.
Panels can achieve different surface effects such as deep and light textures, matte and natural cut surfaces, and color and grain can also be adjusted according to the design direction; the gap between the look at drawing stage and the actual scene is relatively controllable, reducing on-site failures.
Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.
At the design stage, designers usually compare several approaches at the same time—stone-look flexible panels, ultra-thin flexible stone and bendable exterior wall stone—and then make trade-offs based on the difficulty of the shape.
Black Coarse Rammed Earth Flexible Stone FAQ
Is flexible stone considered "fake stone"?
Flexible stone belongs to an independent category within building decorative materials and implements JG/T 540-2017 "Flexible Faux Stone Decorative Materials for Buildings." It uses mineral raw materials to reproduce the visual language of stone, and its positioning is "another way of expressing stone," rather than a counterfeit.
Can construction be done directly on an old wall?
Yes. Flexible stone requires no keel and no complicated substrate preparation; when the flatness of the original finish meets requirements, it can be applied directly as an overlay. If flatness is insufficient, it is recommended to level or repair locally first. Renovation of old houses does not require large-scale removal of the original wall.
How is the environmental performance of Black Coarse Rammed Earth Flexible Stone?
Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.
How much material does a project roughly need?
It is advisable to estimate based on the actual layout area plus a 5%–8% waste allowance. Flexible stone can be bent and cut, and waste at irregular positions will be slightly higher than for flat installation. For the specific quantity, drawings can be provided and the manufacturer can assist with the calculation.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
The application scope covers indoor and outdoor architectural decoration, full-package commercial fit-out, hotel and shop renovation, office building renovation, residential building facades, municipal exterior wall projects, campus and hospital renovation, old residential community renovation and cultural tourism landscape construction. Our factory is a source manufacturer and can provide physical samples, customization according to drawings and preferential pricing solutions for engineering batches; foreign trade orders are supplied with customs declaration documents and test reports, with nationwide shipping.
Black Coarse Rammed Earth Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.