Gray Cement Cast Board Flexible Stone
Gray Cement Cast Board is a flexible stone in the Rammed Earth and Cement series. Its surface has a gray tone and cement cast board texture. It is lightweight, flexible, and bendable, and is suitable for walls in commercial spaces such as hotels, restaurants, commercial stores, and showrooms. This page provides specifications and packaging parameters, material and performance, construction methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Gray Cement Cast Board Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Rammed earth and cement.
- Craftsmanship: Cement casting texture
- Main tone: Neutral gray tone, with natural light-to-dark transitions
- Texture features: Cement casting batch marks and fine air pores, with an obvious industrial texture
- Recommended scenarios: Industrial-style commercial spaces, coffee shops, showrooms, office spaces
- Main applications: Building wall
Gray Cement Cast Board Flexible Stone is part of the IGOODS rammed earth and cement product line, and the one in this line leaning toward "background and order." It takes an industrial and locally grounded route, suitable for spaces with minimal decoration and a strong emphasis on atmosphere. It has a low presence as a background surface, making it easy to let the visual focus go to furnishings and lighting, so it is more readily prioritized for walls that need to control structural load.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. In inquiries and searches, this type of product is also often called soft stone panels, flexible stone-look veneer, bendable stone, or ultra-thin flexible exterior wall stone.
Actual photographed texture features of cement casting board
As seen in the actual product photo, this Gray Cement Casting Board flexible stone is overall a neutral gray tone with natural light-dark transitions, and its texture can be summarized as "cement casting trowel marks and fine air pores, with an obvious industrial feel." The grain runs continuously with natural transitions and no abrupt splice breaks; once installed on the wall, it maintains a consistent appearance under both natural light and artificial lighting.
Under different lighting conditions, the appearance of the gray cement cast panel flexible stone varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1220×2930 | 2.5-3.5 | 17 | 70 | 250.2 | 1300×3000×550 | 1260 |
Optional colors: Gray, black (other colors can be customized)
Packaging notes: Bulk goods are shipped in wooden crates, making loading/unloading and stacking more stable; for export, export wooden crates are recommended to improve compression resistance and moisture protection for long-distance transport. Specification data are subject to order confirmation.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, with no wooden substrate used, so there is no hidden risk of formaldehyde release. Light weight, thin panel, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also has flame retardant, moisture-proof, and stain-resistant performance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, gray cement cast panel flexible stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.
Key installation and construction points
No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.
Substrate treatment
The core requirements for the substrate are "flat, dry and firm": check flatness with a 2 m straightedge; for walls with high moisture content, apply a sealing primer first; sanding and loose layers need to be removed down to a solid substrate. The selection of interface agents differs for different substrates, and it is recommended to confirm according to on-site conditions.
Measurement and layout
At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.
Cutting and hole drilling
When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
Where corners cannot be bent directly, metal edge trim or internal corner trim must be used as a transition. During acceptance, focus on checking the hollowing rate, seam consistency, smoothness of closures, and verticality of internal and external corners.
Which commercial spaces is Gray Cement Cast Board Flexible Stone suitable for?
The following explains, by project type, where it is suitable and the main reasons for choosing it.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
Exhibition and temporary exhibition spaces
Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.
Office building public areas and corridors
Corridors and public areas in office buildings are large and heavily partitioned, so materials should ideally maintain consistent performance across different floors. Flexible stone has stable color tone within the same batch and is suitable for phased construction floor by floor.
What product features does Gray Cement Cast Board Flexible Stone have?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Texture customizable: Supports adjusting texture direction and color according to design drafts, and also supports large panels, small panels and special-shaped dimensions, making it easy to coordinate with project layout.
- Old walls can be directly covered: Suitable for secondary renovation of existing walls: no need to demolish down to the substrate, which is friendlier for commercial spaces in operation and occupied residences.
- Convenient on-site cutting: The material can be cut on site and adjusted at any time for dimensional deviations, without relying on factory processing as natural stone does.
Project selection and procurement key points for Gray Cement Cast Board Flexible Stone
For projects such as large residential development facades, municipal public buildings, school and hospital exterior walls, factory exterior wall renovation, cultural tourism towns, old city renovation and urban lighting, the engineering performance requirements for materials are higher than decorative performance. Flexible stone has engineering-grade characteristics such as weather resistance, aging resistance, waterproofing and stain resistance, and frost-crack resistance.
The flexible material bonds firmly and has low self-weight, which can significantly reduce the safety risk of stone falling from high-rise facades and meets the safety construction requirements of exterior wall projects. Bulk supply for large projects, expedited production scheduling and on-site technical coordination are supported; exclusive specifications and textures can be customized according to engineering drawings, suitable for large-area exterior wall paving, with flat joints and a unified overall effect.
Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.
How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.
Frequently Asked Questions about Gray Cement Cast Board Flexible Stone
Will the color of samples and bulk supply be consistent?
Flexible stone is made from natural mineral raw materials. Color tone is relatively stable within the same batch, and slight differences may exist between different batches. It is recommended to use materials from the same batch within the same project and to arrange mixed layout during the layout stage.
Is construction of irregular shapes troublesome?
Compared with hard stone, the advantage of flexible stone in irregular positions lies in its ability to wrap the entire surface in one piece, reducing assembly seams. However, the more complex the shape, the higher the requirements for layout and finishing, and it is recommended that experienced installation crews carry out the work.
Is there a risk of falling off when used on exterior walls?
The self-weight of flexible stone is far lower than that of traditional stone. When full-adhesion technology is used, the bonding area is large and the stress is uniform, and the risk of falling from high-rise facades is lower than that of dry-hung stone systems. However, construction quality, adhesive selection and substrate treatment also affect final safety, and construction specifications must be followed.
Is flexible stone considered "fake stone"?
Flexible stone belongs to an independent category within building decorative materials and implements JG/T 540-2017 "Flexible Faux Stone Decorative Materials for Buildings." It uses mineral raw materials to reproduce the visual language of stone, and its positioning is "another way of expressing stone," rather than a counterfeit.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. From sampling to batch delivery, the factory handles matters directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, and after-sales is followed up by the technical team.
Gray Cement Cast Board Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.