Black Rough-Faced Granite Flexible Stone

Black Rough-Faced Granite is a flexible stone in the Slate & Natural Mountain Stone series. Its surface features a black tone and rough-faced granite texture. It is lightweight, thin, flexible, and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance details, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and bulk project quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Matte granite Release:2026-11-13

Product quick information

  • Product name: Black Rough-Faced Granite Flexible Stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Slate and natural mountain stone
  • Craftsmanship: Granite imitation stone texture
  • Main tone:Deep black tone, calm and restrained
  • Texture features: Granular granite matte texture, with light and dark mineral particles distributed naturally
  • Recommended scenarios: Engineering exterior walls, hotels, commercial spaces, renovation projects
  • Main applications: Building wall

In IGOODS's slate and natural mountain stone, Black Rough-Faced Granite Flexible Stone is a style in the "weight and presence" direction. It takes an overall heavy route that emphasizes raw character, suitable for public spaces that need to hold their own; when applied to actual wall surfaces, it can quickly establish a visual center of gravity in large spaces and better set off light-colored elements.

As a relatively new type of wall material, flexible stone is selected differently from traditional stone. Similar products on the market are also called soft stone finish, flexible imitation stone panel, bendable stone, etc., all referring to the same type of flexible wall material.

Actual photographed texture characteristics of matte-finish granite

In the real photo, the surface of Black Rough-Faced Granite Flexible Stone appears in a deep black tone, restrained and composed. Its texture is characterized by "granular granite rough-face texture, with natural distribution of light and dark mineral particles." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.

The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.

If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12003-4.53.5260187.2690×1300×1100950
1200×30003-4.517602161300×3100×5501145

Optional colors: White, beige (other colors customizable)

Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.

Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.

Material and performance parameters

The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, with no wooden substrate used, so there is no hidden risk of formaldehyde release. In terms of physical performance, it features ultra-thin lightweight, high flexibility, bendability, and resistance to cracking and deformation, while also being fire-retardant, waterproof and moisture-proof, stain-resistant and dirt-resistant, and having a certain degree of UV resistance and high and low temperature resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

Please note that the performance of flexible stone is closely related to substrate conditions, adhesive selection, and installation workmanship. The table above presents the general characteristics of the material itself. For the engineering indicators of Black Matte Granite flexible stone in specific projects, please refer to the valid test report for the selected model and the project technical confirmation.

Key installation and construction points

On the construction side, no keels or complex substrate preparation are required; panels can be installed once the wall is leveled, and both dry bonding and wet bonding are compatible. Flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls can all be handled accordingly.

Substrate treatment

The core requirements for the substrate are "flat, dry and firm": check flatness with a 2 m straightedge; for walls with high moisture content, apply a sealing primer first; sanding and loose layers need to be removed down to a solid substrate. The selection of interface agents differs for different substrates, and it is recommended to confirm according to on-site conditions.

Measurement and layout

During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.

Cutting and hole drilling

Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.

Pasting installation

Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.

Compaction and adjustment

After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.

Edge finishing and acceptance

For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.

Which commercial spaces is Black Rough-Faced Granite Flexible Stone suitable for?

The application of this color in actual projects is relatively concentrated and can generally be grouped into the following types of spaces.

Building exterior wall and renovation

The first concern for exterior wall projects is self-weight and safety. Flexible stone has a self-weight far lower than traditional stone, with a large bonding area and low risk of falling off, making it suitable for renovation and retrofitting of existing building facades.

Hotel public areas

In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.

Chain store standardization

Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.

What product features does Black Rough-Faced Granite Flexible Stone have?

  • Lightweight dead weight:Compared with natural stone slabs of the same size, the weight of this type of material is an order of magnitude lower, so no separate load-bearing reinforcement is required for the finish.
  • Flexible and bendable: The panel itself has a certain flexibility and can be bent into an arc within a certain radius for construction, used for wrapping columns, curved walls, and shaped door headers. The specific bendable radius needs to be confirmed based on the model and substrate conditions.
  • No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
  • Same-color matching:The color and texture range within a series is controllable, making it easier to maintain overall consistency during large-area construction.
  • Batch supply: Supports full-container shipments and mixed-batch customization, and can provide customs declaration documents, product test reports and qualification documents, facilitating foreign trade and engineering centralized procurement.
  • Low-maintenance:The surface does not easily retain marks, and high-frequency use locations in public spaces do not require additional protective measures.

Project selection and procurement key points for Black Rough-Faced Granite Flexible Stone

For projects such as large residential development facades, municipal public buildings, school and hospital exterior walls, factory exterior wall renovation, cultural tourism towns, old city renovation and urban lighting, the engineering performance requirements for materials are higher than decorative performance. Flexible stone has engineering-grade characteristics such as weather resistance, aging resistance, waterproofing and stain resistance, and frost-crack resistance.

Specifications and textures can be customized according to drawings, coordinated with large-area paving layouts, with flat joints and a unified overall appearance; the warranty period and specific engineering performance indicators are subject to the contract and the valid test reports of the corresponding products.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.

Black Rough-Faced Granite Flexible Stone FAQ

Can Black Rough-Faced Granite Flexible Stone be used for curved walls or columns?

Flexible stone itself has bendable characteristics and can wrap curved walls and columns. However, the specific bendable radius depends on the thickness of the selected model and the substrate conditions. It is recommended to make a physical sample for verification before construction, and not to judge solely by the attribute of "flexible material" that all curved surfaces can be constructed directly.

Can Black Rough-Faced Granite Flexible Stone be used outdoors?

Yes. Flexible stone has UV resistance, high and low temperature resistance and weathering resistance, and is suitable for exterior facades. For long-term outdoor use, it is recommended to confirm the selection in conjunction with the project location's climate conditions and orientation.

Is flexible stone considered "fake stone"?

Flexible stone belongs to an independent category within building decorative materials and implements JG/T 540-2017 "Flexible Faux Stone Decorative Materials for Buildings." It uses mineral raw materials to reproduce the visual language of stone, and its positioning is "another way of expressing stone," rather than a counterfeit.

Can construction be done directly on an old wall?

Yes. Flexible stone requires no keel and no complicated substrate preparation; when the flatness of the original finish meets requirements, it can be applied directly as an overlay. If flatness is insufficient, it is recommended to level or repair locally first. Renovation of old houses does not require large-scale removal of the original wall.

How is the environmental performance of Black Rough-Faced Granite Flexible Stone?

Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.

About IGOODS

IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.

Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.

The application scope covers indoor and outdoor architectural decoration, full-package commercial fit-out, hotel and shop renovation, office building renovation, residential building facades, municipal exterior wall projects, campus and hospital renovation, old residential community renovation and cultural tourism landscape construction. As a source factory, we support free sample dispatch, customization according to drawings and preferential pricing for engineering batches; for foreign trade, one-stop supply is available, with complete qualifications and test reports provided, nationwide shipping and after-sales technical support.

Black Rough-Faced Granite Flexible Stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied