Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone
Ink Gold Rhythm 03 Matte-Finish Granite is a flexible stone from the Slate and Natural Mountain Stone Series, with the color pattern Ink Gold Rhythm 03. It is lightweight, thin, flexible, and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance details, installation methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Slate and natural mountain stone
- Craftsmanship: Granite imitation stone texture
- Main tone: Metallic gold tone, warm and bright with luster
- Texture features: Granular granite matte texture, with light and dark mineral particles distributed naturally
- Recommended scenarios: Engineering exterior walls, hotels, commercial spaces, renovation projects
- Main applications: Building wall
In IGOODS's slate and natural mountain stone, Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone is a style in the "gloss and refinement" direction. It takes an overall heavy route that emphasizes raw character, suitable for public spaces that need to hold their own; when applied to actual wall surfaces, it shows a certain layered reflectivity under lighting, suitable for focal surfaces that require refinement.
Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. When purchasing, searching by the term "flexible stone" is least likely to miss items; soft stone and flexible stone-like veneer are also common synonyms.
Actual photographed texture characteristics of matte-finish granite
Observing the real photo details of Ink Gold Rhythm 03 Rough-Faced Granite flexible stone, it can be seen that it has an overall metallic gold tone, warm, bright, and glossy. As for the texture, it belongs to the category of "granular granite rough-faced texture, with natural distribution of light and dark mineral grains." The texture density is evenly distributed on the same piece of material, and the texture performance at the edges and corners is basically consistent with the central area.
Under different lighting conditions, the appearance of Mojin Zhiyun 03 matte granite flexible stone will have slight differences—under diffused light the overall effect is stronger, while under directional light the undulations of the texture are enhanced. Designers can use this to control the visual weight of the wall.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 3-4.5 | 3.5 | 260 | 187.2 | 690×1300×1100 | 950 |
| 1200×3000 | 3-4.5 | 17 | 60 | 216 | 1300×3100×550 | 1145 |
Optional colors: White, beige (other colors customizable)
Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
What determines the scope of application of flexible stone is its substrate composition and physical performance. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, and no wood substrate is used, so there is no hidden risk of formaldehyde release. The material is lightweight and flexible, can be bent, and is not prone to cracking or deformation; it also has comprehensive performance including flame retardancy, moisture resistance, stain resistance and UV resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
It should be noted that the performance of flexible stone is closely related to substrate conditions, adhesive selection and construction workmanship. The table above presents the conventional properties of the material itself. For engineering indicators of Mojin Zhi Yun 03 Rough-Faced Granite Flexible Stone in specific projects, please refer to the valid test reports for the selected model and project technical confirmation.
Key installation and construction points
No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.
Substrate treatment
Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.
Measurement and layout
Lay out according to the actual wall dimensions, giving priority to placing whole panels in the positions where the eye lingers most, and leaving cut edges in internal corners or closing details. It is recommended to use the same batch of material for the same wall and to mix and lay out once before installation to reduce concentrated color tones.
Cutting and hole drilling
When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.
Pasting installation
Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.
Compaction and adjustment
After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces is Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone suitable for?
The following explains, by project type, where it is suitable and the main reasons for choosing it.
Building exterior wall and renovation
The first concern for exterior wall projects is self-weight and safety. Flexible stone has a self-weight far lower than traditional stone, with a large bonding area and low risk of falling off, making it suitable for renovation and retrofitting of existing building facades.
Hotel public areas
In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.
Boutique commercial space
Boutique commercial spaces often pursue material layering within a limited area. This type of texture also has light and dark variations within the same color family, allowing the wall to gain thickness without complex shaping.
What are the product features of Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
- Low-maintenance:The finish does not require waxing or special maintenance; daily cleaning with water or a neutral cleaner is sufficient, and color and texture change little after long-term use.
- Project coordination: Can assist in calculating quantities and layout plans according to project drawings, and provide technical coordination during the construction phase to reduce on-site rework.
- High degree of form freedom:At locations requiring continuous curved surfaces or special-shaped closures, the material's cuttability makes shaping much simpler than with rigid stone.
Project selection and procurement key points for Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone
When selecting materials, construction engineering companies, exterior wall engineering general contractors, municipal engineering parties and property developers are most concerned about weather resistance and durability, safety and compliance, and delivery capability for bulk procurement. Flexible stone is designed specifically for outdoor engineering scenarios, focusing on solving the problems of traditional stone in terms of self-weight, falling risk and filing compliance.
The flexible material bonds firmly and has low self-weight, which can significantly reduce the safety risk of stone falling from high-rise facades and meets the safety construction requirements of exterior wall projects. Bulk supply for large projects, expedited production scheduling and on-site technical coordination are supported; exclusive specifications and textures can be customized according to engineering drawings, suitable for large-area exterior wall paving, with flat joints and a unified overall effect.
Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.
How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.
Frequently Asked Questions about Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone
How is the environmental performance of Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone?
Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.
What is the typical lead time?
Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.
How to confirm whether to choose this one or another color pattern in the same series?
It is advisable to also request physical samples of 2–3 candidate color options, compare them under the lighting conditions of the actual space, and then make a decision in combination with the layout effect over a large area. Looking only at a small sample can easily overlook the rhythm of the overall installed surface.
Can the specifications of Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone be customized?
Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.
Does a difference in thickness lead to different usage scenarios?
There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.
About IGOODS
IGOODS is a manufacturer of flexible stone, soft stone facing and flexible stone-like panels, supplying projects such as indoor and outdoor architectural decoration, commercial decoration and full renovation, hotel and shop renovation, office building renovation, building facades, municipal exterior wall engineering, campus and hospital renovation, old residential community renovation and cultural tourism landscape creation.
The product supports custom specifications, custom textures and custom colors, and can provide large boards, small boards and special-shaped sizes; for export, OEM branding and packaging customization can be done according to customer requirements, and full-container shipping solutions are provided. On the design side, samples and selection support can be provided; on the engineering side, layout and on-site technical coordination can be provided.
The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. From sampling to bulk delivery, the factory coordinates directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, and after-sales is followed up by the technical team.
Ink Gold Rhythm 03 Matte-Finish Granite Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.