Light gray solid-color axed stone flexible stone
Light gray solid-color axed stone flexible stone is a solid-color flexible stone from IGOODS in the slate and natural mountain stone category. The main color tone is light gray, soft and elegant, imitating hand-axed marks, with a natural split face and a rough, powerful texture. It is thin, lightweight, flexible, and bendable, suitable for hotels, clubs, exterior walls, and renovation projects. This page provides specifications and packaging parameters, material and performance details, installation methods, and acceptance criteria, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:Light gray solid-color axed stone flexible stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Slate and natural mountain stone
- Craftsmanship:Hand-chiseled texture
- Main tone: Light gray tone, soft and elegant
- Texture features:Imitates hand-chiseled marks, with a natural split face and a rough, powerful texture
- Recommended scenarios:Hotels, clubs, exterior walls, renovation projects
- Main applications: Building wall
Light gray solid-color axed stone flexible stonePart of the IGOODS slate and natural mountain stone product line, and the one in this line leaning toward "background and order." It takes an overall heavy route that emphasizes raw character, suitable for public spaces that need to hold their own. It has a low presence as a background surface, making it easy to let the visual focus go to furnishings and lighting, so it is more readily prioritized for walls that need to control structural load.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. When purchasing, searching by the term "flexible stone" is least likely to miss items; soft stone and flexible stone-look veneer are also common synonymous names.
Actual-shot texture features of ax-chiseled stone
Observing the real photo details of Light Gray Solid Color Axe-Cut Stone flexible stone, it can be seen that it has an overall light gray tone, soft and elegant. As for the texture, it belongs to the category of "imitation hand axe-cut marks, with natural split faces and a rough, powerful texture." The texture density is evenly distributed on the same piece of material, and the texture performance at the edges and corners is basically consistent with the central area.
Under different lighting conditions, the appearance of Light Gray Solid Color Axe-Cut Stone flexible stone will have slight differences—under diffused light the overall effect is stronger, while under directional light the undulations of the texture are enhanced. Designers can use this to control the visual weight of the wall.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1200×2400 | 4.5-6.5 | 20 | 50 | 152 | 1280×2480×500 | 1080 |
Optional colors: White, gray (other colors customizable)
Packaging notes: Wooden crate packaging is the standard method, and shipments can be made in batches according to project progress; export orders can use export wooden crates. The above specifications, weights, and packaging dimensions are for reference only, and the final version is subject to contract confirmation.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The material uses a composite of natural mineral raw materials and a polymer flexible substrate, an inorganic ecological material with zero formaldehyde, meeting the environmental requirements of residential decoration, commercial fit-outs, and outdoor projects. Light weight, thin panel, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also has flame retardant, moisture-proof, and stain-resistant performance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges of flexible stone as a category of material. The acceptance basis for Light Gray Solid-Color Axe-Cut Stone Flexible Stone in specific projects shall be subject to the valid test report of the selected model, the provisions of the supply contract, and the relevant standards of the project location.
Key installation and construction points
No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.
Substrate treatment
Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
Where corners cannot be bent directly, metal edge trim or internal corner trim must be used as a transition. During acceptance, focus on checking the hollowing rate, seam consistency, smoothness of closures, and verticality of internal and external corners.
What commercial spaces is light gray solid-color axed stone flexible stone suitable for?
The following explains, by project type, where it is suitable and the main reasons for choosing it.
Hotel guest rooms and elevator lobbies
Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.
Clubhouses and private dining spaces
In low-illuminance environments, the undulation and texture of the material are more easily perceived than color. The surface undulation of this type of flexible stone can form natural light-dark transitions under light strips or downlights.
Building exterior wall and renovation
The first concern for exterior wall projects is self-weight and safety. Flexible stone has a self-weight far lower than traditional stone, with a large bonding area and low risk of falling off, making it suitable for renovation and retrofitting of existing building facades.
What product features does light gray solid-color axed stone flexible stone have?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
- Low-maintenance:The surface does not easily retain marks, and high-frequency use locations in public spaces do not require additional protective measures.
- Project coordination: Can assist in calculating quantities and layout plans according to project drawings, and provide technical coordination during the construction phase to reduce on-site rework.
- High degree of form freedom:At locations requiring continuous curved surfaces or special-shaped closures, the material's cuttability makes shaping much simpler than with rigid stone.
Project selection and procurement key points for light gray solid-color axed stone flexible stone
Projects such as full-house commercial fit-outs, retail shop renovations, hotel and homestay renovations, office building refurbishments, campus and hospital renovations, and residential common-area fit-outs share common traits: large wall areas and uneven substrate conditions. Flexible stone weighs far less than traditional stone, requires no heavy keel substrate, and can significantly reduce wall load-bearing pressure.
The material is flexible, crack-resistant, and impact-resistant, and can adapt to complex site environments. New installers can get up to speed quickly, which helps compress the schedule and labor costs. Fire resistance, moisture resistance, and weather resistance indicators also meet the requirements of routine project acceptance.
Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.
Lightweight and safe exterior wall stone, flexible decorative stone for indoor and outdoor universal use, a relatively high-frequency search direction in commercial renovation material selection.
Frequently Asked Questions about Light Gray Solid-Color Axed Stone Flexible Stone
What is the difference between light gray solid-color axed stone flexible stone and natural stone?
The two belong to different types of materials and should not be simply understood as substitutes for each other. The value of natural stone lies in its unreproducible natural attributes; flexible stone emphasizes being lightweight and thin, construction organization, and form adaptability. Material selection should comprehensively consider the design effect, substrate conditions, material weight, transport method, project budget, and usage environment.
What is the installation process for light gray solid-color axed stone flexible stone?
The conventional process is substrate inspection, on-site measurement and layout, material cutting, pasting, compaction and position adjustment, and edge and corner finishing. The specific plan needs to be determined based on substrate type, wall dimensions and use environment.
How is the environmental performance of light gray solid-color axed stone flexible stone?
Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.
What is the typical lead time?
Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.
About IGOODS
IGOODS is a manufacturer of flexible stone, soft stone facing and flexible stone-like panels, supplying projects such as indoor and outdoor architectural decoration, commercial decoration and full renovation, hotel and shop renovation, office building renovation, building facades, municipal exterior wall engineering, campus and hospital renovation, old residential community renovation and cultural tourism landscape creation.
The product supports custom specifications, custom textures and custom colors, and can provide large boards, small boards and special-shaped sizes; for export, OEM branding and packaging customization can be done according to customer requirements, and full-container shipping solutions are provided. On the design side, samples and selection support can be provided; on the engineering side, layout and on-site technical coordination can be provided.
The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. Direct supply from the source factory, with free sample mailing, customization according to drawings, engineering bulk supply, test reports, nationwide shipping, and after-sales technical support.
Light gray solid-color axed stone flexible stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.