White Rough-Faced Granite Flexible Stone
White Rough-Faced Granite is a flexible stone in the Slate and Natural Mountain Stone series, with a white tone and rough-faced granite texture on the surface. It is lightweight, thin, flexible and bendable, and is suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: White Rough-Faced Granite Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Slate and natural mountain stone
- Craftsmanship: Granite imitation stone texture
- Main tone: Light white tone, clean and bright
- Texture features: Granular granite matte texture, with light and dark mineral particles distributed naturally
- Recommended scenarios: Engineering exterior walls, hotels, commercial spaces, renovation projects
- Main applications: Building wall
White Rough-Faced Granite Flexible Stone is part of the IGOODS slate and natural mountain stone product line, and the one in this line leaning toward "clean color and enduring appeal." It takes an overall heavy route that emphasizes raw character, suitable for public spaces that need to hold their own. As a large-area base, it looks clean, does not grow tiresome, and more easily sets off lighting and furnishings, so it is more readily prioritized for walls that need to control structural load.
Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. In inquiries and searches, such products are also often called soft stone panel, flexible stone-like veneer, bendable stone or ultra-thin flexible exterior wall stone.
Actual photographed texture characteristics of matte-finish granite
Observing the real-shot details of the white rough-surface granite flexible stone, it can be seen that it has an overall light white tone, clean and bright. As for the texture specifically, it belongs to the category of "granular granite matte texture, with light and dark mineral granules distributed naturally." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.
Under different lighting conditions, the appearance of the white rough-face granite flexible stone varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.
If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 3-4.5 | 3.5 | 260 | 187.2 | 690×1300×1100 | 950 |
| 1200×3000 | 3-4.5 | 17 | 60 | 216 | 1300×3100×550 | 1145 |
Optional colors: White, beige (other colors customizable)
Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.
Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.
Material and performance parameters
At the level of material and performance, several points about this type of material need to be clarified first. The substrate is a flexible material composed of natural mineral raw materials compounded with polymers, an inorganic ecological system with no added formaldehyde, suitable for both indoor and outdoor use environments. In terms of physical performance, it features ultra-thin and lightweight, high flexibility, bendability, and resistance to cracking and deformation, while also being fire-retardant and flame-retardant, waterproof and moisture-proof, stain-resistant and dirt-resistant, and possessing a certain degree of UV resistance and resistance to high and low temperatures.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges for flexible stone as a category of material. For the acceptance of white rough-faced granite flexible stone in a specific project, the valid test reports for the selected model, the provisions of the supply contract, and the relevant standards of the project location shall govern.
Key installation and construction points
This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.
Substrate treatment
Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.
Which commercial spaces is White Rough-Faced Granite Flexible Stone suitable for?
The following explains, by project type, where it is suitable and the main reasons for choosing it.
Building exterior wall and renovation
The first concern for exterior wall projects is self-weight and safety. Flexible stone has a self-weight far lower than traditional stone, with a large bonding area and low risk of falling off, making it suitable for renovation and retrofitting of existing building facades.
Hotel guest rooms and elevator lobbies
Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
What product features does White Rough-Faced Granite Flexible Stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: The panel itself has a certain flexibility and can be bent into an arc within a certain radius for construction, used for wrapping columns, curved walls, and shaped door headers. The specific bendable radius needs to be confirmed based on the model and substrate conditions.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.
- Batch supply: Supports full-container shipments and mixed-batch customization, and can provide customs declaration documents, product test reports and qualification documents, facilitating foreign trade and engineering centralized procurement.
- Low-maintenance:The surface does not easily retain marks, and high-frequency use locations in public spaces do not require additional protective measures.
Project selection and procurement points for White Rough-Faced Granite Flexible Stone
Projects such as full-house commercial fit-outs, retail shop renovations, hotel and homestay renovations, office building refurbishments, campus and hospital renovations, and residential common-area fit-outs share common traits: large wall areas and uneven substrate conditions. Flexible stone weighs far less than traditional stone, requires no heavy keel substrate, and can significantly reduce wall load-bearing pressure.
Compatible with most existing substrates such as old walls, lightweight walls and insulated wall surfaces, enabling renovation without large-scale demolition and reducing removal and waste disposal steps.
From regional municipal projects to nationwide engineering centralized procurement, and then to cross-border export, the supply method for flexible stone needs to be arranged separately according to the nature of the project.
Lightweight and safe exterior wall stone, flexible decorative stone for indoor and outdoor universal use, a relatively high-frequency search direction in commercial renovation material selection.
Frequently Asked Questions about White Rough-Faced Granite Flexible Stone
Is there a fire rating?
The product has flame-retardant performance; the specific combustion performance rating is subject to the valid test report for the selected model. For public building projects with clear fire protection requirements, it is recommended to directly request the test documents for the corresponding batch at the selection stage.
What is the typical lead time?
Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
Can the specifications of White Rough-Faced Granite Flexible Stone be customized?
Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.
How thick is White Rough-Faced Granite Flexible Stone usually?
The common thickness of flexible stone ranges from 2.3–9mm, with considerable variation across different patterns and specifications. For the thickness range of White rough-faced granite flexible stone, refer to the specification table above; the specific thickness is subject to order confirmation.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. As a source factory, we support free sample mailing, customization according to drawings, and preferential pricing for engineering bulk orders; for foreign trade, we can provide one-stop supply, with complete qualifications and test reports, nationwide shipping, and after-sales technical support.
White Rough-Faced Granite Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.