Crimson-Yellow Veined Rough-Faced Granite Flexible Stone

Crimson-Yellow Veined Rough-Faced Granite Flexible Stone is IGOODS's printed rough-faced granite flexible stone in the Slate and Natural Mountain Stone series, with a beige main tone and a crimson-yellow veined texture on the surface. It is lightweight, flexible, and bendable, suitable for walls in hotels, homestays, commercial spaces, exhibition halls, and similar settings. This page provides specifications and packaging parameters, materials and performance, installation methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Matte granite Release:2026-11-13

Product quick information

  • Product name: Crimson-Yellow Veined Rough-Faced Granite Flexible Stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Slate and natural mountain stone
  • Craftsmanship: Printed rough-faced granite
  • Main tone:Beige tone, warm and elegant
  • Texture features: Crimson-yellow veined texture, with natural surface layering and light-dark transitions, delivering the look of a natural material
  • Recommended scenarios:Hotels, homestays, commercial spaces, showrooms, feature walls
  • Main applications: Building wall

Crimson-Yellow Veined Rough-Faced Granite Flexible Stone is part of the IGOODS slate and natural mountain stone product line, and the one in this line leaning toward "gentleness and durability." It takes an overall heavy route that emphasizes raw character, suitable for public spaces that need to hold their own. It looks stable under warm lighting and does not easily show age over long use, so it is more readily prioritized for walls that need to control structural load.

As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. In inquiries and searches, this type of product is also often called soft stone panel, flexible imitation stone finish, bendable stone, or ultra-thin flexible exterior wall stone.

Actual photographed texture characteristics of matte-finish granite

Observing the real-shot details of the Crimson-Yellow Veined Rough-Faced Granite Flexible Stone, it can be seen that it has an overall beige tone, warm and elegant. As for the texture specifically, it belongs to the category of "crimson-yellow veined texture, with natural surface layers and light-dark transitions, and a look imitating natural materials." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.

Under different lighting conditions, the Crimson-Yellow Veined Rough-Faced Granite Flexible Stone varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.

If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12003-4.53.5260187.2690×1300×1100950
1200×30003-4.517602161300×3100×5501145

Optional colors: White, beige (other colors customizable)

Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.

Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.

Material and performance parameters

At the level of material and performance, several points about this type of material need to be clarified first. In terms of material, it uses natural mineral raw materials compounded with a polymer flexible substrate, is an inorganic ecological material, zero formaldehyde, and meets the environmental requirements of home decoration, commercial decoration, and outdoor projects. Light weight, thin panels, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also offers flame retardancy, moisture resistance, and stain resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, Crimson-Yellow Veined Rough-Faced Granite Flexible Stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.

Key installation and construction points

No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.

Substrate treatment

Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.

Measurement and layout

During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.

Cutting and hole drilling

Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.

Pasting installation

Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.

Compaction and adjustment

After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.

Edge finishing and acceptance

Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.

Which commercial spaces are suitable for Crimson-Yellow Veined Rough-Faced Granite Flexible Stone?

Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.

Hotel public areas

In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.

Homestays and resort spaces

Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.

Chain store standardization

Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.

Showroom and display backdrop

The walls of exhibition spaces are essentially a "background" that needs to support the exhibits rather than compete with them. This type of texture has detail up close and reads as a unified whole from a distance, making it suitable for continuous background surfaces.

What product features does Crimson-Yellow Veined Rough-Faced Granite Flexible Stone have?

  • Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
  • Flexible and bendable: The panel itself has a certain flexibility and can be bent into an arc within a certain radius for construction, used for wrapping columns, curved walls, and shaped door headers. The specific bendable radius needs to be confirmed based on the model and substrate conditions.
  • No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
  • Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.
  • Old walls can be directly covered: When the flatness of the original finish meets the requirements, it can be directly covered. Renovation projects do not require large-scale removal of the original wall, reducing demolition and disposal steps.
  • Convenient on-site cutting: The material can be cut on site and adjusted at any time for dimensional deviations, without relying on factory processing as natural stone does.

Project selection and procurement key points for Crimson-Yellow Veined Rough-Faced Granite Flexible Stone

For projects such as large residential development facades, municipal public buildings, school and hospital exterior walls, factory exterior wall renovation, cultural tourism towns, old city renovation and urban lighting, the engineering performance requirements for materials are higher than decorative performance. Flexible stone has engineering-grade characteristics such as weather resistance, aging resistance, waterproofing and stain resistance, and frost-crack resistance.

Specifications and textures can be customized according to drawings, coordinated with large-area paving layouts, with flat joints and a unified overall appearance; the warranty period and specific engineering performance indicators are subject to the contract and the valid test reports of the corresponding products.

From regional municipal projects to nationwide engineering centralized procurement, and then to cross-border export, the supply method for flexible stone needs to be arranged separately according to the nature of the project.

How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.

Crimson-Yellow Veined Rough-Faced Granite Flexible Stone Frequently Asked Questions

What common specifications are available for Crimson-Yellow Veined Rough-Faced Granite Flexible Stone?

The specific available specifications for Crimson-Yellow Veined Rough-Faced Granite Flexible Stone are shown in the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes and supports customization of large panels, small panels, and irregular sizes. Actual supply specifications need to be confirmed in combination with the selected thickness and packaging method.

Does a difference in thickness lead to different usage scenarios?

There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.

Will the color of samples and bulk supply be consistent?

Flexible stone is made from natural mineral raw materials. Color tone is relatively stable within the same batch, and slight differences may exist between different batches. It is recommended to use materials from the same batch within the same project and to arrange mixed layout during the layout stage.

Is construction of irregular shapes troublesome?

Compared with hard stone, the advantage of flexible stone in irregular positions lies in its ability to wrap the entire surface in one piece, reducing assembly seams. However, the more complex the shape, the higher the requirements for layout and finishing, and it is recommended that experienced installation crews carry out the work.

About IGOODS

IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.

Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.

The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. From sampling to bulk delivery, the factory coordinates directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, and after-sales is followed up by the technical team.

Crimson-Yellow Veined Rough-Faced Granite Flexible Stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied