Gray Solid Color Rough-Faced Granite Flexible Stone

Gray Solid Color Rough-Faced Granite Flexible Stone belongs to the IGOODS Slate and Natural Mountain Stone product line and is the branch of this product line oriented toward "background and order." Overall, it follows a route of being heavy and emphasizing raw character, and is suitable for public spaces that need to hold their own.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Matte granite Release:2026-11-12

Product quick information

  • Product name:Gray Solid Color Rough-Faced Granite Flexible Stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Slate and natural mountain stone
  • Craftsmanship: Granite imitation stone texture
  • Main tone: Neutral gray tone, with natural light-to-dark transitions
  • Texture features: Granular granite matte texture, with light and dark mineral particles distributed naturally
  • Recommended scenarios: Engineering exterior walls, hotels, commercial spaces, renovation projects
  • Main applications: Building wall

Gray Solid Color Rough-Faced Granite Flexible Stone is part of the IGOODS slate and natural mountain stone product line, and the one in this line leaning toward "background and order." It takes an overall heavy route that emphasizes raw character, suitable for public spaces that need to hold their own. It has a low presence as a background surface, making it easy to let the visual focus go to furnishings and lighting, so it is more readily prioritized for walls that need to control structural load.

Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. In inquiries and searches, this type of product is also often called soft stone panels, flexible stone-look veneer, bendable stone, or ultra-thin flexible exterior wall stone.

Actual photographed texture characteristics of matte-finish granite

As seen in the actual product photo, this Gray Solid-Color Rough-Faced Granite flexible stone is overall a neutral gray tone with natural light-dark transitions, and its texture can be summarized as "granular granite matte texture, with light and dark mineral particles naturally distributed." The grain runs continuously with natural transitions and no abrupt splice breaks; once installed on the wall, it maintains a consistent appearance under both natural light and artificial lighting.

The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.

If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12003-4.53.5260187.2690×1300×1100950
1200×30003-4.517602161300×3100×5501145

Optional colors: White, beige (other colors customizable)

Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.

Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.

Material and performance parameters

The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The substrate is a composite of natural mineral raw materials and polymer flexible materials, an inorganic ecological system with no added formaldehyde, suitable for both indoor and outdoor use environments. In terms of physical performance, it features ultra-thin lightweight, high flexibility, bendability, and resistance to cracking and deformation, while also being fire-retardant, waterproof and moisture-proof, stain-resistant and dirt-resistant, and having a certain degree of UV resistance and high and low temperature resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

It should be noted that the performance of flexible stone is closely related to substrate conditions, adhesive selection and construction workmanship. The table above presents the conventional properties of the material itself. For engineering indicators of Gray Solid Color Rough-Faced Granite Flexible Stone in specific projects, please refer to the valid test reports for the selected model and project technical confirmation.

Key installation and construction points

On the construction side, no keels or complex substrate preparation are required; panels can be installed once the wall is leveled, and both dry bonding and wet bonding are compatible. Flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls can all be handled accordingly.

Substrate treatment

Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.

Measurement and layout

At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.

Cutting and hole drilling

Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.

Pasting installation

Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.

Compaction and adjustment

After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.

Edge finishing and acceptance

Where corners cannot be bent directly, metal edge trim or internal corner trim must be used as a transition. During acceptance, focus on checking the hollowing rate, seam consistency, smoothness of closures, and verticality of internal and external corners.

Which commercial spaces is Gray Solid Matte-Finish Granite Flexible Stone suitable for?

The application of this color in actual projects is relatively concentrated and can generally be grouped into the following types of spaces.

Building exterior wall and renovation

The first concern for exterior wall projects is self-weight and safety. Flexible stone has a self-weight far lower than traditional stone, with a large bonding area and low risk of falling off, making it suitable for renovation and retrofitting of existing building facades.

Hotel lobbies and corridors

Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.

Commercial storefronts and street blocks

Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.

What product features does Gray Solid Matte-Finish Granite Flexible Stone have?

  • Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
  • Flexible and bendable: The panel itself has a certain flexibility and can be bent into an arc within a certain radius for construction, used for wrapping columns, curved walls, and shaped door headers. The specific bendable radius needs to be confirmed based on the model and substrate conditions.
  • No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
  • Convenient on-site cutting: The material can be cut on site and adjusted at any time for dimensional deviations, without relying on factory processing as natural stone does.
  • Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.
  • Batch supply:As a source factory, we can directly handle bulk engineering orders, support expedited production scheduling and on-site technical coordination, and deliver in batches in line with the project schedule.

Project selection and procurement key points for Gray Solid Matte-Finish Granite Flexible Stone

Projects such as full-house commercial fit-outs, retail shop renovations, hotel and homestay renovations, office building refurbishments, campus and hospital renovations, and residential common-area fit-outs share common traits: large wall areas and uneven substrate conditions. Flexible stone weighs far less than traditional stone, requires no heavy keel substrate, and can significantly reduce wall load-bearing pressure.

Compatible with most existing substrates such as old walls, lightweight walls and insulated wall surfaces, enabling renovation without large-scale demolition and reducing removal and waste disposal steps.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

What low-cost materials to use for exterior wall renovation of commercial buildings, whether old walls can be directly overlaid without demolition, and how to choose fast-installation imitation stone materials for commercial fit-outs are several issues that construction contractors care about most.

Gray Solid Matte-Finish Granite Flexible Stone Frequently Asked Questions

Is there a risk of falling off when used on exterior walls?

The self-weight of flexible stone is far lower than that of traditional stone. When full-adhesion technology is used, the bonding area is large and the stress is uniform, and the risk of falling from high-rise facades is lower than that of dry-hung stone systems. However, construction quality, adhesive selection and substrate treatment also affect final safety, and construction specifications must be followed.

Is flexible stone considered "fake stone"?

Flexible stone belongs to an independent category within building decorative materials and implements JG/T 540-2017 "Flexible Faux Stone Decorative Materials for Buildings." It uses mineral raw materials to reproduce the visual language of stone, and its positioning is "another way of expressing stone," rather than a counterfeit.

What is the installation process for Gray Solid Matte-Finish Granite Flexible Stone?

The conventional process is substrate inspection, on-site measurement and layout, material cutting, pasting, compaction and position adjustment, and edge and corner finishing. The specific plan needs to be determined based on substrate type, wall dimensions and use environment.

How does Gray Solid Matte-Finish Granite Flexible Stone perform in terms of environmental friendliness?

Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.

About IGOODS

IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.

Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.

From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. Our factory is a source manufacturer and can provide physical samples, customization according to drawings and preferential pricing plans for engineering batches; foreign trade orders come with customs declaration documents and test reports, and shipping is available nationwide.

Gray Solid Color Rough-Faced Granite Flexible Stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied