Beige Rough-Face Granite Flexible Stone
Beige Rough-Face Granite is a flexible stone in the Slate & Natural Mountain Stone series, with a beige tone and rough-face granite texture on the surface. It is lightweight, flexible and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance key points, with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Beige Rough-Face Granite Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Slate and natural mountain stone
- Craftsmanship: Granite imitation stone texture
- Main tone:Beige tone, warm and elegant
- Texture features: Granular granite matte texture, with light and dark mineral particles distributed naturally
- Recommended scenarios: Engineering exterior walls, hotels, commercial spaces, renovation projects
- Main applications: Building wall
In IGOODS's slate and natural mountain stone, Beige Rough-Face Granite Flexible Stone is a style in the "gentleness and durability" direction. It takes an overall heavy route that emphasizes raw character, suitable for public spaces that need to hold their own; when applied to actual wall surfaces, it looks stable under warm lighting and does not easily show age over long use.
Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. In inquiries and searches, such products are also often called soft stone panel, flexible stone-like veneer, bendable stone or ultra-thin flexible exterior wall stone.
Actual photographed texture characteristics of matte-finish granite
Observing the real-shot details of the beige rough-surface granite flexible stone, it can be seen that it has an overall beige tone, warm and elegant. As for the texture specifically, it belongs to the category of "granular granite matte texture, with light and dark mineral granules distributed naturally." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.
Under different lighting conditions, the beige rough-face granite flexible stone varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 3-4.5 | 3.5 | 260 | 187.2 | 690×1300×1100 | 950 |
| 1200×3000 | 3-4.5 | 17 | 60 | 216 | 1300×3100×550 | 1145 |
Optional colors: White, beige (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The substrate is a composite of natural mineral raw materials and polymer flexible materials, an inorganic ecological system with no added formaldehyde, suitable for both indoor and outdoor use environments. In terms of physical performance, it features ultra-thin lightweight, high flexibility, bendability, and resistance to cracking and deformation, while also being fire-retardant, waterproof and moisture-proof, stain-resistant and dirt-resistant, and having a certain degree of UV resistance and high and low temperature resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges for flexible stone as a category of material. For the acceptance of beige rough-faced granite flexible stone in a specific project, the valid test reports for the selected model, the provisions of the supply contract, and the relevant standards of the project location shall govern.
Key installation and construction points
No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.
Substrate treatment
Substrate conditions directly determine the final bonding effect, so the substrate acceptance step cannot be skipped: moisture content, flatness and strength must all pass. When the substrate does not meet the standard, it is better to repair first than to install panels directly.
Measurement and layout
Lay out according to the actual wall dimensions, giving priority to placing whole panels in the positions where the eye lingers most, and leaving cut edges in internal corners or closing details. It is recommended to use the same batch of material for the same wall and to mix and lay out once before installation to reduce concentrated color tones.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces is Beige Rough-Face Granite Flexible Stone suitable for?
Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.
Facade renovation and retrofitting
Old renovation projects often do not allow large-scale demolition of the original finish. Flexible stone can be directly applied as a covering, reducing demolition, debris removal and waste disposal steps, which helps with both schedule and disturbance control.
Hotel lobbies and corridors
Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
What product features does Beige Rough-Face Granite Flexible Stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.
- Batch supply:As a source factory, we can directly handle bulk engineering orders, support expedited production scheduling and on-site technical coordination, and deliver in batches in line with the project schedule.
- Low-maintenance:The finish does not require waxing or special maintenance; daily cleaning with water or a neutral cleaner is sufficient, and color and texture change little after long-term use.
Project selection and procurement key points for Beige Rough-Face Granite Flexible Stone
When selecting materials, construction engineering companies, exterior wall engineering general contractors, municipal engineering parties and property developers are most concerned about weather resistance and durability, safety and compliance, and delivery capability for bulk procurement. Flexible stone is designed specifically for outdoor engineering scenarios, focusing on solving the problems of traditional stone in terms of self-weight, falling risk and filing compliance.
Specifications and textures can be customized according to drawings, coordinated with large-area paving layouts, with flat joints and a unified overall appearance; the warranty period and specific engineering performance indicators are subject to the contract and the valid test reports of the corresponding products.
From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.
How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.
Beige Rough-Face Granite Flexible Stone FAQ
What common specifications does Beige Rough-Face Granite Flexible Stone have?
The specific available specifications for Beige Rough-Face Granite Flexible Stone are shown in the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes, and custom large panels, small panels and special-shaped sizes are supported. Actual supply specifications need to be confirmed in combination with the selected thickness and packaging method.
Does a difference in thickness lead to different usage scenarios?
There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.
Will the color of samples and bulk supply be consistent?
Flexible stone is made from natural mineral raw materials. Color tone is relatively stable within the same batch, and slight differences may exist between different batches. It is recommended to use materials from the same batch within the same project and to arrange mixed layout during the layout stage.
Is construction of irregular shapes troublesome?
Compared with hard stone, the advantage of flexible stone in irregular positions lies in its ability to wrap the entire surface in one piece, reducing assembly seams. However, the more complex the shape, the higher the requirements for layout and finishing, and it is recommended that experienced installation crews carry out the work.
About IGOODS
IGOODS is a manufacturer of flexible stone, soft stone facing and flexible stone-like panels, supplying projects such as indoor and outdoor architectural decoration, commercial decoration and full renovation, hotel and shop renovation, office building renovation, building facades, municipal exterior wall engineering, campus and hospital renovation, old residential community renovation and cultural tourism landscape creation.
The product supports custom specifications, custom textures and custom colors, and can provide large boards, small boards and special-shaped sizes; for export, OEM branding and packaging customization can be done according to customer requirements, and full-container shipping solutions are provided. On the design side, samples and selection support can be provided; on the engineering side, layout and on-site technical coordination can be provided.
The application scope covers indoor and outdoor architectural decoration, full-package commercial fit-out, hotel and shop renovation, office building renovation, residential building facades, municipal exterior wall projects, campus and hospital renovation, old residential community renovation and cultural tourism landscape construction. Our factory is a source manufacturer and can provide physical samples, customization according to drawings and preferential pricing solutions for engineering batches; foreign trade orders are supplied with customs declaration documents and test reports, with nationwide shipping.
Beige Rough-Face Granite Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.