Hotel lobby 480㎡ printed granite (Glacier Green) wall construction case

IGOODS of AIGUOSI provides printed granite (Glacier Green) as wall material for a hotel lobby project in Malang City, Sichuan Province. It is directly mounted on the wall using full-adhesive method without the need for a stud base. The estimated wall area of the project is about 480㎡, material specification 1220×2930mm, thickness 2.5–3.5mm, and single weight about 17kg. It is executed according to JG/T 540-2017 'Building Flexible Stone Cladding Material'.

Published time:

IGOODS provided for a hotel lobby project in Ma'erkang City, Sichuan Province,Hotel lobbyProject provided byPrinted board rock(Glacier Green)As a wall material, it is applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 480㎡, material specifications 1220×2930mmThickness 2.5–3.5mmThe weight of a single piece is about 17kg; implement JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"The application images in this case total 4 pieces.

  • 1220×2930mm Panel specifications
  • 2.5–3.5mm thickness
  • Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
  • Approx. 480 ㎡ Wall area (◆budget estimate)
  • 4 pieces Application image
  • JG/T 540-2017 Implementation standards

Project file

Project item Content
Project typeHotel lobby
Application locationLobby main wall / welcome backdrop, round columns / curved column cladding, elevator hall / walkway, wall base 0–300mm
Materials usedPrinted slate (Glacier Green) (Slate and natural mountain stone)
Material specifications1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationMa'erkang City, Sichuan Province
Wall areaApprox. 480 ㎡ (◆ budget estimate)
Actual photo record4 pieces (on-site photography)

Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.

1. Customer industry usage scenario: the real wall requirements of a hotel lobby

  1. Highest traffic volume; wear resistance comes first The lobby is a space with around-the-clock high-frequency traffic; luggage carts, suitcase wheels and cleaning equipment pass repeatedly, and the wall base is especially prone to impact marks. The material's scratch resistance and ease of repair are more important than attractive texture.
  2. Floor height and volume require large panel format The wall scale in the lobby is far larger than in guest rooms; fewer seams create a stronger overall effect. Insufficient panel size leads to dense seams, fragmenting the sense of scale in the large space.
  3. Lighting layering depends on a matte base The lobby lighting design (light strips, wall-washing lights, accent lighting) only works on a matte, textured substrate; high-gloss surface materials reflect light strips into streaks of light.
  4. Fireproofing and environmental protection are hard thresholds The lobby is a crowded place, so the material's combustion performance and environmental indicators must be supported by test reports, not just verbal descriptions.
  5. Mainly curved surfaces and shapes The round columns, curved partitions and arched door openings common in lobbies can only be achieved with traditional tiles by using small-format pieces with dense seams; flexible materials can be directly bent and wrapped around curves, creating continuous shapes without folded corners.
  6. Handover must be fast and must not affect the opening countdown The lobby is one of the last areas completed before opening, and the schedule is compressed the hardest; solutions that can be applied directly to the wall without framing and curing have obvious advantages.

II. Material comparison: why printed slate (Glacier Green)

Why choose printed slate (Glacier Green)

The bedding of slate is the most directional type in natural stone—the texture forms diagonal bands and visually carries a sense of flow.Glacier GreenThis tone suppresses the warm cast commonly seen in slate, leaving a cooler blue-green: the gray tone removes the earthy yellow, retaining only the structural feel of bedding planes and shadows, and it holds its own alongside metal, glass, and dark woodwork.

The sculptural elements in this project are concentrated in three places: the curved corridor wall, the spiral staircase side wall, and the cladding of three columns. All three require the material to run continuously along the curved surface with the texture direction undisturbed—this is preciselyFlexible StoneKey differences compared with traditional tiles:Do not use small pieces to piece together curves, so dense diagonal joints will not appear on curved surfaces.

Slate and Natural Mountain Stone providesGlacier Green, ink green, light gray-greenand other colors, with the rest customizable; the visual tone of this case is based onGlacier Greenas the base tone.

2.2 Material performance parameters

Project Parameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant;The specific grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions.
Bonding methodFull-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner.
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'

Specifications and packaging parameters

Specifications (mm) Thickness (mm) Approx. weight per panel (kg) Wooden crate packaging (pieces/crate) Area per box (㎡)
1220×29302.5–3.51770Approx. 250.2

The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.

3. Configuration plan

3.1 Allocate materials by spatial function

Space / Location Suggested materials Specifications Key focus
Lobby main wall / welcome backdropFlexible stone (large panel format)1220×2930mmOverall feel, seam alignment
Cylindrical column / curved column claddingFlexible stone (curved wrapping)Same as aboveBending radius, seam positions
Elevator lobby / corridorFlexible StoneSame as aboveScrub resistance, corner finishing
Wall base 0–300mmSame as above, or add edge trimSame as aboveLuggage carts and cleaning equipment collisions

3.2 Quantity and project schedule estimate

Dosage formula (★engineering experience basis):

Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up)
Item Calculation Result
Wall area of this project—Approx. 480 ㎡
Wastage rate★Value by spatial complexity10%
Material preparation area480 × 1.10Approx. 528 ㎡
Number of wooden crates528 ÷ 250.2 → round up3 boxes

Construction period estimate (◆ estimate):

Stage Schedule
Substrate treatment (knock out hollow areas + leveling + drying)Substrate treatment usually accounts for about 1/3 of the total construction period
Layout setting-out★The denser the holes, the greater the layout workload
Adhesive mounting on wall★2 people can complete 60-100㎡ per day; 480㎡ ÷ 80㎡/day ≈ 6 days
Finishing · Cleaning · Acceptance★Project experience
Total (budget estimate)Approx. 13 days(range 10–16 days)

Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.

A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.

3.3 Material Configuration

Stage Materials Function Basis
BondingSpecial adhesive,Full adhesion methodEnsure the finish and substrate are fully bondedProduct technical requirements; weather-resistant adhesive for outdoor use
SubstrateLeveling materials (selected according to substrate condition)Provide a flat, dry substrate free of hollowingSubstrate flatness directly affects appearance
Close upEdge trim / metal trimTreat internal and external corners, door frames, and wall base closures★Engineering Experience Practices
CuttingUtility knife / special cutting toolOn-site cutting according to the layout drawingOn-site secondary cutting is standard practice

IV. Construction process and acceptance control points

Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.

Step 1 · Base treatment

Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.

★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.

Step 2 · Measurement and layout

It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.

Step 3 · Cutting

Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.

Step 4 · Adhesive application and wall installation (full adhesion method)

RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.

Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.

Step 5 · Joints and edge finishing

  • Tight-joint: The seam lines are the finest, suitable for regular walls;
  • Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
  • Metal trim: Used for closing edges and emphasizing lines.

Step 6 · Cleaning and self-inspection

Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.

Step 7 · Delivery acceptance

Control points Standard value or practice Basis
Substrate dryness / hollowingdry, free of floating dust, no hollowing; if not compliant, repair first★Engineering Experience Practices
Substrate flatnessLeveling in place, repair deficiencies first★Engineering Experience Practices
Bonding methodFull bonding method, adhesive selected according to product instructionsProduct technical requirements
Material execution standardJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'Product execution standard
Internal and external corners and closuresEdge trim / metal trim closure, trim straight and true★Engineering Experience Practices
Cutouts and panelsThe cutout position is coaxial with the panel, and the edges are not chipped★Engineering Experience Practices
Color difference controlUse the same batch of material for the same wall surface in the same space★Engineering Experience Practices
Joint straightnessAlign joint lines within the same space, with no obvious misalignment visually★Engineering Experience Practices
Environmental protection indicatorsNo added formaldehyde, no asbestosProduct information (subject to the test report for the model)

V. Image display and application description

Total application photos of this project 4 pieces; all photographed on site at the project, covering curved corridor wall, spiral staircase side wall, columns and lounge area, elevator hall end feature and other areas.

Corridor: green stone-pattern curved wall with upper and lower contour lighting
Figure 1 · Corridor, green stone-texture curved wall with upper and lower outline lighting
Spiral staircase, green stone-pattern curved side wall and steps
Figure 2 · Spiral staircase, green stone-textured curved side wall and steps
Rest area, green stone-textured column and seating along the wall
Fig. 3 · Lounge, green stone-texture cylindrical column and seating along the wall
End-view wall, green stone-texture background and illuminated oval decoration
Figure 4 · End wall, green stone-grain background and illuminated oval decoration

VI. Communication and confirmation process

For the wall engineering of a hotel lobby project, communication mainly revolves around three things:Whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.

Owner: Ours is a hotel lobby, and we want the wall to have the texture a hotel lobby should have. What do you suggest?

IGOODS: It is recommended to first clarify three things: gloss level (matte, not high-gloss), texture strength (weak texture is more enduring), and whether curved shapes are required. For materials in the slate and natural mountain stone series such as printed slate (glacier green), glacier green performs relatively stably and can be adapted.

Owner: How should cutouts and panel joints be handled?

IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.

Owner: What should be noted about the base layer?

IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.

Owner: Will it be easy to clean later?

IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.

Owner: To what extent is it dirt-resistant and scratch-resistant?

IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.

What was confirmed in this communication?

  • Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
  • Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
  • Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
  • Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
  • Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.

Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.

Seven, usage effects and daily maintenance

7.1 What is the perception of space?

After Glacier Green slate is installed on the wall, the most direct change in the space isThe light-dark relationship has been reorganized by the light stripWhen light strips hit the matte slate surface, they do not form a bright spot but are elongated along the direction of the texture, so the turn of the curved wall becomes readable—guests can tell at a glance that this wall is curved, rather than a flat expanse of gray.

Column wrapping is another benefiting area: three cylindrical columns are continuously covered with the same material, with the grain running horizontally across the column surface, making the columns visually lighter and no longer three abrupt solids in the lobby.

7.2 Daily maintenance

Scenario Treatment method
Daily floating dustdry cloth or feather duster
Water stains / beverage stainsWipe with clean water or neutral detergent
Oily stainsNeutral cleaner,Avoid strong solvents
Minor scratchesJudged by texture type; textured surfaces themselves are relatively tolerant of minor marks
Prohibited practicesStrong acid and strong alkali solvents, steel wool, grinding machines

Maintenance-related characteristics of the material itself (from product documentation):

  • Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
  • Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
  • Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
  • Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.

7.3 On-site Recheck After Delivery

Review items Inspection content Basis for determination
Joints and closuresWhether joint lines are straight, whether lines are aligned, whether corners are properly executedno obvious misalignment by visual inspection
Cutouts and panelsWhether the switch and socket are coaxial with the cutout and whether the edges are chippedPanel coverage with no exposed edges
Whole wallWhether there is hollowing or obvious color differenceHollowing rate 0; no visible color difference on the same wall

Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.

7.4 Cost Reference

Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.

Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:

Item Calculation Result
Lower limit of material amount480 × 25Approx. RMB 12,000
Upper limit of material amount480 × 300Approx. RMB 140,000

Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.

VIII. Common questions (FAQ)

Will the slate texture crack on curved walls?

No. Flexible stone can be bent into arcs within a certain radius, and curved walls, wrapped columns and the side walls of spiral staircases can all be covered in one piece, with the texture direction unified at the layout stage.The specific bendable radius shall be subject to the selected model and substrate conditions.; for large-radius shapes, it is recommended to make a sample for confirmation first.

What kind of lobby is Glacier Green suitable for?

Cooler, more restrained spaces are more suitable—modern-style lobbies with a high proportion of metal, glass, and dark woodwork; Glacier Green can offset the cold hardness of metal while not clashing with warm-toned soft furnishings. If the overall scheme is warm yellow-toned, it is advisable to check a physical sample before deciding.

How to estimate the area of a curved wall?

According to the wall'sUnfolded areaYes, but it is not the projected area. After unfolding, a curved wall is usually 5%–15% more than the projected surface, and the smaller the radius, the greater the difference; add the side areas of light coves and niches. The budget estimate for this case is about 480㎡.

Should the lobby wall use slate ortravertine?

Slate has a strong directional bedding structure and leans cool, suiting modern styles; travertine has a more subtle, warmer pitted feel, suiting natural or wabi-sabi spaces. Both can be curved; the main consideration is how the space's character and lighting color temperature work together.

IX. Project File and Contact Information

Project file Content
Project typeHotel lobby
Materials usedPrinted slate (Glacier Green) (Slate and natural mountain stone)
Material specifications1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg
Packaging70 Sheets/Case | Approximately 250.2㎡/Case
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationMa'erkang City, Sichuan Province
Wall areaApprox. 480 ㎡ (◆ budget estimate)
Actual photo record4 pieces

Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door

  • Phone / WeChat / WhatsApp: 19136341389
  • Email: 19136341389@163.com
  • Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
  • Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response

Content and scope statement: This page records the wall material selection and construction process for this hotel lobby. The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆EstimateThe area, schedule, and cost are estimated values calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.

Find the appropriate wall expression for your project.

Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.

Consulting project material selection ↗
Contact phone number Product Catalog Free Sample
WeChat ID copied