酒店大堂1850㎡打印洞石(侘寂米黄)墙面施工案例
艾谷思IGOODS 为四川省眉山市一处酒店大堂项目提供打印洞石(侘寂米黄)作为墙面材料,采用满粘法直接上墙、无需龙骨基层。项目墙面概算约 1,850㎡,材料规格 1220×2930mm、厚度 2.5–3.5mm、单片重量约 17kg,执行 JG/T 540-2017《建筑用柔性仿石饰面材料》。
IGOODS provided for a hotel lobby project in Meishan City, Sichuan Province,Hotel lobbyProject provided byPrinted travertine(Wabi-Sabi Beige)As a wall material, it is applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 1,850㎡, material specifications 1220×2930mmThickness 2.5–3.5mmThe weight of a single piece is about 17kg; implement JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"The application images in this case total 9 pieces.
- 1220×2930mm Panel specifications
- 2.5–3.5mm thickness
- Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
- Approx. 1,850 ㎡ Wall area (◆budget estimate)
- 9 pieces Application image
- JG/T 540-2017 Implementation standards
Project file
| Project item | Content |
|---|---|
| Project type | Hotel lobby |
| Application location | Lobby main wall / welcome backdrop, round columns / curved column cladding, elevator hall / walkway, wall base 0–300mm |
| Materials used | Printed travertine (wabi-sabi rice yellow) (Travertine series) |
| Material specifications | 1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg |
| Construction process | Full bonding method, direct wall installation after leveling, no keel required |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Project location | Meishan City, Sichuan Province |
| Wall area | Approx. 1,850㎡ (◆Estimate) |
| Actual photo record | 9 pieces (on-site shooting) |
Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.
1. Customer industry usage scenario: the real wall requirements of a hotel lobby
- Highest traffic volume; wear resistance comes first The lobby is a space with around-the-clock high-frequency traffic; luggage carts, suitcase wheels and cleaning equipment pass repeatedly, and the wall base is especially prone to impact marks. The material's scratch resistance and ease of repair are more important than attractive texture.
- Floor height and volume require large panel format The wall scale in the lobby is far larger than in guest rooms; fewer seams create a stronger overall effect. Insufficient panel size leads to dense seams, fragmenting the sense of scale in the large space.
- Lighting layering depends on a matte base The lobby lighting design (light strips, wall-washing lights, accent lighting) only works on a matte, textured substrate; high-gloss surface materials reflect light strips into streaks of light.
- Fireproofing and environmental protection are hard thresholds The lobby is a crowded place, so the material's combustion performance and environmental indicators must be supported by test reports, not just verbal descriptions.
- Mainly curved surfaces and shapes The round columns, curved partitions and arched door openings common in lobbies can only be achieved with traditional tiles by using small-format pieces with dense seams; flexible materials can be directly bent and wrapped around curves, creating continuous shapes without folded corners.
- Handover must be fast and must not affect the opening countdown The lobby is one of the last areas completed before opening, and the schedule is compressed the hardest; solutions that can be applied directly to the wall without framing and curing have obvious advantages.
II. Material comparison: why printed travertine (Wabi-Sabi Beige)
2.1 Why choose the printed travertine (Aged Beige)
Compared with cooler wabi-sabi white,Wabi-Sabi Beige adds one step of warmth; in hotels with a high proportion of warm lighting it is more "in tune"—the walls do not need to rely on cool colors for contrast, but stand in the same tone as the woodwork, fabrics and copper-colored metal.
This project has a very wide scope: the curved main wall of the lobby, atrium columns, elevator halls, guest room corridors, headboard backgrounds, the bar counter, semi-enclosed booths, and even the walls of the indoor water feature pool.The same material simultaneously serves the two tasks of "large-scale overall coherence" and "close-up texture"; what it relies on is the kind of relief feel of travertine that is neither too light nor too deep—from a distance it reads as a clean expanse of beige, and up close you can see the shadows of the pores and bedding planes.
The travertine series offersWabi-Sabi Beige, Warm Beige, Light Sandand other colors, with the rest customizable; the visual tone of this case is based onWabi-Sabi Beigeas the base tone.
2.2 Material performance parameters
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant;The specific grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions. |
| Bonding method | Full-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner. |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area per box (㎡) |
|---|---|---|---|---|
| 1220×2930 | 2.5–3.5 | 17 | 70 | Approx. 250.2 |
The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.
3. Configuration plan
3.1 Allocate materials by spatial function
| Space / Location | Suggested materials | Specifications | Key focus |
|---|---|---|---|
| Lobby main wall / welcome backdrop | Flexible Stone(large panel format) | 1220×2930mm | Overall feel, seam alignment |
| Cylindrical column / curved column cladding | Flexible stone (curved wrapping) | Same as above | Bending radius, seam positions |
| Elevator lobby / corridor | Flexible Stone | Same as above | Scrub resistance, corner finishing |
| Wall base 0–300mm | Same as above, or add edge trim | Same as above | Luggage carts and cleaning equipment collisions |
3.2 Quantity and project schedule estimate
Dosage formula (★engineering experience basis):
Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up) | Item | Calculation | Result |
|---|---|---|
| Wall area of this project | — | Approx. 1,850㎡ |
| Wastage rate | ★Value by spatial complexity | 10% |
| Material preparation area | 1,850 × 1.10 | Approx. 2,035 ㎡ |
| Number of wooden crates | 2,035 ÷ 250.2 → Round up | 9 boxes |
Construction period estimate (◆ estimate):
| Stage | Schedule |
|---|---|
| Substrate treatment (knock out hollow areas + leveling + drying) | Substrate treatment usually accounts for about 1/3 of the total construction period |
| Layout setting-out | ★The denser the holes, the greater the layout workload |
| Adhesive mounting on wall | ★2 people in a group can complete 60-100㎡; 1,850㎡ ÷ 80㎡/day ≈ 23 days |
| Finishing · Cleaning · Acceptance | ★Project experience |
| Total (budget estimate) | Approx. 13 days(range 10–16 days) |
Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.
A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.
3.3 Material Configuration
| Stage | Materials | Function | Basis |
|---|---|---|---|
| Bonding | Special adhesive,Full adhesion method | Ensure the finish and substrate are fully bonded | Product technical requirements; weather-resistant adhesive for outdoor use |
| Substrate | Leveling materials (selected according to substrate condition) | Provide a flat, dry substrate free of hollowing | Substrate flatness directly affects appearance |
| Close up | Edge trim / metal trim | Treat internal and external corners, door frames, and wall base closures | ★Engineering Experience Practices |
| Cutting | Utility knife / special cutting tool | On-site cutting according to the layout drawing | On-site secondary cutting is standard practice |
IV. Construction process and acceptance control points
Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.
Step 1 · Base treatment
Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.
★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.
Step 2 · Measurement and layout
It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.
Step 3 · Cutting
Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.
Step 4 · Adhesive application and wall installation (full adhesion method)
RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.
Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.
Step 5 · Joints and edge finishing
- Tight-joint: The seam lines are the finest, suitable for regular walls;
- Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
- Metal trim: Used for closing edges and emphasizing lines.
Step 6 · Cleaning and self-inspection
Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.
Step 7 · Delivery acceptance
| Control points | Standard value or practice | Basis |
|---|---|---|
| Substrate dryness / hollowing | dry, free of floating dust, no hollowing; if not compliant, repair first | ★Engineering Experience Practices |
| Substrate flatness | Leveling in place, repair deficiencies first | ★Engineering Experience Practices |
| Bonding method | Full bonding method, adhesive selected according to product instructions | Product technical requirements |
| Material execution standard | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' | Product execution standard |
| Internal and external corners and closures | Edge trim / metal trim closure, trim straight and true | ★Engineering Experience Practices |
| Cutouts and panels | The cutout position is coaxial with the panel, and the edges are not chipped | ★Engineering Experience Practices |
| Color difference control | Use the same batch of material for the same wall surface in the same space | ★Engineering Experience Practices |
| Joint straightness | Align joint lines within the same space, with no obvious misalignment visually | ★Engineering Experience Practices |
| Environmental protection indicators | No added formaldehyde, no asbestos | Product information (subject to the test report for the model) |
V. Image display and application description
Total application photos of this project 9 pieces; all photographed on site at the project, covering the lobby curved main wall and water feature, elevator hall corridor, guest room headboard background wall, lobby irregular feature wall, lobby bar counter and wine cabinet, guest room corridor, semi-enclosed booths, atrium columns, lobby wave main wall and other areas.
VI. Communication and confirmation process
For the wall engineering of a hotel lobby project, communication mainly revolves around three things:Whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.
Owner: Ours is a hotel lobby, and we want the wall to have the texture a hotel lobby should have. What do you suggest?
IGOODS: It is recommended to first clarify three things: gloss level (matte, not high-gloss), texture strength (weak texture is more enduring), and whether curved shapes are required. For materials in the travertine series such as printed travertine (wabi-sabi beige), wabi-sabi beige performs relatively stably and can be adapted.
Owner: How should cutouts and panel joints be handled?
IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.
Owner: What should be noted about the base layer?
IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.
Owner: Will it be easy to clean later?
IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.
Owner: To what extent is it dirt-resistant and scratch-resistant?
IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.
What was confirmed in this communication?
- Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
- Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
- Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
- Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
- Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.
Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.
Seven, usage effects and daily maintenance
7.1 What is the perception of space?
The first effect of Beige Travertine isThe temperature of the space has been unified. The lobby, corridor, guest rooms, and catering areas use the same material and color tone, so that guests moving through the space will not experience a sense of 'having changed places' and a sense of disconnection, which is the consistency that chain hotels value most.
The second effect appears in the details: the bar counter is curved, the booth seating is semi-enclosed, and the water feature pool wall is also curved—All curved surfaces are continuously wrapped in the same material, with no folded corners at the closures, visually it looks like a space carved out of a single block of stone, rather than assembled.
7.2 Daily maintenance
| Scenario | Treatment method |
|---|---|
| Daily floating dust | dry cloth or feather duster |
| Water stains / beverage stains | Wipe with clean water or neutral detergent |
| Oily stains | Neutral cleaner,Avoid strong solvents |
| Minor scratches | Judged by texture type; textured surfaces themselves are relatively tolerant of minor marks |
| Prohibited practices | Strong acid and strong alkali solvents, steel wool, grinding machines |
Maintenance-related characteristics of the material itself (from product documentation):
- Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
- Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
- Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
- Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.
7.3 On-site Recheck After Delivery
| Review items | Inspection content | Basis for determination |
|---|---|---|
| Joints and closures | Whether joint lines are straight, whether lines are aligned, whether corners are properly executed | no obvious misalignment by visual inspection |
| Cutouts and panels | Whether the switch and socket are coaxial with the cutout and whether the edges are chipped | Panel coverage with no exposed edges |
| Whole wall | Whether there is hollowing or obvious color difference | Hollowing rate 0; no visible color difference on the same wall |
Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.
7.4 Cost Reference
Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.
Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:
| Item | Calculation | Result |
|---|---|---|
| Lower limit of material amount | 1,850 × 25 | Approx. RMB 46,000 |
| Upper limit of material amount | 1,850 × 300 | Approx. RMB 560,000 |
Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.
VIII. Common questions (FAQ)
If the same material runs from the lobby to the guest rooms, will the grade be lowered?
No, butDepends on installation precision. The same material is a full-height arched wall in the lobby and a headboard background in the guest room, with a scale difference of several times: in the lobby, check if the seams are straight and the arc smooth; in the guest room, check if the openings are straight and the ends are fine. The acceptance standards are different at both places, and the same method cannot be copied.
Will there be problems if travertine is applied to the walls of a water feature pool and exposed to long-term immersion?
The material itself does not absorb water and is resistant to mold, making it suitable for humid environments; however,The key to the pool wall lies in edge finishing and waterproofing construction——The methods above and below the water level should be handled separately, and the waterproof layer should be coordinated with the facing water surface. It is recommended to explain the pool construction method separately before construction.
How can seam lines be kept straight on a wavy curved wall?
MustFirst set out the layout lines before installing on the wallFor a wavy wall, the landing point of every vertical seam on the curved surface must be calculated in advance; it cannot be adjusted by on-site visual estimation. The conventional method is to print the layout drawing at 1:1 and paste it onto the substrate for positioning.
How was the wall area for this project calculated?
Add up the developed wall areas of each area: lobby main wall and atrium, elevator hall and corridors, guest rooms (by number of rooms × wall area per room), food and beverage and bar areas, plus the increment from developed curved surfaces. The budget estimate for this project is about 1,850㎡.
IX. Project File and Contact Information
| Project file | Content |
|---|---|
| Project type | Hotel lobby |
| Materials used | Printed travertine (wabi-sabi rice yellow) (travertine series) |
| Material specifications | 1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg |
| Packaging | 70 Sheets/Case | Approximately 250.2㎡/Case |
| Construction process | Full bonding method, direct wall installation after leveling, no keel required |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Project location | Meishan City, Sichuan Province |
| Wall area | Approx. 1,850㎡ (◆Estimate) |
| Actual photo record | 9 pieces |
Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door
- Phone / WeChat / WhatsApp: 19136341389
- Email: 19136341389@163.com
- Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
- Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response
Content and scope statement: This page records the wall material selection and construction process for this hotel lobby. The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆EstimateThe area, schedule, and cost are estimated values calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.
Relevant Materials and Solutions
Flexible Stone Solutions Selection Guides Request sample quotationFind the appropriate wall expression for your project.
Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.