Danxia Red Travertine Flexible Stone

Danxia Red Travertine is a flexible stone in the travertine series. Its color is Danxia Red; it is lightweight, thin and flexible, and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores and showrooms. This page provides specifications and packaging parameters, material and performance, construction methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are available, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Print hole stone Release:2026-11-13

Product quick information

  • Product name: Danxia Red Travertine Flexible Stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Travertine series
  • Craftsmanship: Printed travertine
  • Main tone: Red tone, warm and full
  • Texture features: Travertine pore texture and natural stone veins, with natural transitions between light and dark layers
  • Recommended scenarios:Hotels, clubs, showrooms, boutique retail
  • Main applications: Building wall

Danxia Red Travertine Flexible Stone is part of the IGOODS travertine series product line, and the one in this line leaning toward "temperature and focal point." It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance. Its color tension is clear, making it suitable as a local focal surface rather than large-area application, so it is more readily prioritized for walls that need to control structural load.

Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. In inquiries and searches, such products are also often called soft stone panel, flexible stone-like veneer, bendable stone or ultra-thin flexible exterior wall stone.

The photographed texture characteristics of printed travertine

Observing the real photo details of Danxia Red Travertine flexible stone, it can be seen that it has an overall red tone, full and warm. As for the texture, it belongs to the category of "travertine pore texture and natural stone veins, with natural transitions between light and dark layers." The texture density is evenly distributed on the same piece of material, and the texture performance at the edges and corners is basically consistent with the central area.

Under different lighting conditions, the appearance of Danxia Red Travertine flexible stone will have slight differences—under diffused light the overall effect is stronger, while under directional light the undulations of the texture are enhanced. Designers can use this to control the visual weight of the wall.

It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12002.3-2.82.5-2.8330237.6680×1280×1100900
1200×24002.3-2.810.5-111002881300×2500×6001170
1200×30003.5-417-18802881280×3100×5501390

Optional colors: Grey, white (other colors customizable)

Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.

Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.

Material and performance parameters

What determines the scope of application for flexible stone is its substrate composition and physical performance. In terms of material, it is a composite of natural mineral raw materials and a polymer flexible substrate, an inorganic ecological material with zero formaldehyde, meeting the environmental requirements of home decoration, commercial decoration, and outdoor projects. The material is lightweight and flexible, bendable, and resistant to cracking and deformation; it also offers comprehensive performance in flame retardancy, moisture resistance, stain resistance, and UV resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For the specific Danxia Red Travertine flexible stone product, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.

Key installation and construction points

This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.

Substrate treatment

The core requirements for the substrate are "flat, dry and firm": check flatness with a 2 m straightedge; for walls with high moisture content, apply a sealing primer first; sanding and loose layers need to be removed down to a solid substrate. The selection of interface agents differs for different substrates, and it is recommended to confirm according to on-site conditions.

Measurement and layout

At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.

Cutting and hole drilling

Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.

Pasting installation

Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.

Compaction and adjustment

Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.

Edge finishing and acceptance

For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.

Which commercial spaces is Danxia Red Travertine Flexible Stone suitable for?

Judging from the types of projects already completed, this color mainly appears in the following directions.

Hotel guest rooms and elevator lobbies

Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.

Clubhouses and reception spaces

Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.

Exhibition and temporary exhibition spaces

Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.

Chain store standardization

Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.

What product features does Danxia Red Travertine Flexible Stone have?

  • Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
  • Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
  • No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
  • Convenient on-site cutting: Conventional thickness can be cut with a utility knife and a straightedge through multiple scoring passes; irregular shapes and openings are trimmed on site, with no need for prefabrication and secondary transport.
  • Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.
  • Batch supply:As a source factory, we can directly handle bulk engineering orders, support expedited production scheduling and on-site technical coordination, and deliver in batches in line with the project schedule.

Project selection and procurement key points for Danxia Red Travertine Flexible Stone

The most common problem at the design material selection stage is: the stone texture in the rendering looks great, but after implementation it is distorted due to seams, color differences or shape limitations. The bendable and cuttable characteristics of flexible stone are precisely intended for locations such as curved walls, columns, irregular door headers and shaped curtain walls.

Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

At the design stage, designers usually compare several approaches at the same time—stone-look flexible panels, ultra-thin flexible stone and bendable exterior wall stone—and then make trade-offs based on the difficulty of the shape.

Frequently Asked Questions about Danxia Red Travertine Flexible Stone

How is the environmental performance of Danxia Red Travertine Flexible Stone?

Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.

How much material does a project roughly need?

It is advisable to estimate based on the actual layout area plus a 5%–8% waste allowance. Flexible stone can be bent and cut, and waste at irregular positions will be slightly higher than for flat installation. For the specific quantity, drawings can be provided and the manufacturer can assist with the calculation.

Is there support for engineering bulk procurement?

Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.

What common specifications does Danxia Red Travertine Flexible Stone have?

The specific available specifications of Danxia Red Travertine Flexible Stone are shown in the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes, and custom large panels, small panels and irregular sizes are supported. Actual supply specifications must be confirmed in combination with the selected thickness and packaging method.

How thick is Danxia Red Travertine Flexible Stone usually?

Common thicknesses of flexible stone range from 2.3–9 mm, with considerable variation among different colors and specifications. The thickness range corresponding to Danxia Red Travertine Flexible Stone is subject to the specification table above, and the specific thickness is subject to order confirmation.

About IGOODS

IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.

The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.

From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. As a source factory, we support free sample mailing, customization according to drawings and preferential pricing for engineering batches; for foreign trade, we can provide one-stop supply, with complete qualifications and test reports, nationwide shipping and after-sales technical support.

Danxia Red Travertine Flexible Stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied