Line-drawn brown-yellow travertine flexible stone
Line-drawn brown-yellow travertine is a flexible stone from the travertine series, with a line-drawn brown-yellow color. It is lightweight, flexible and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and bulk project quotations are available, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Line-drawn brown-yellow travertine flexible stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Travertine series
- Craftsmanship: Printed travertine
- Main tone: Warm yellow tone, bright and warm
- Texture features: Travertine pore texture and natural stone veins, with natural transitions between light and dark layers
- Recommended scenarios:Hotels, clubs, showrooms, boutique retail
- Main applications: Building wall
In IGOODS's travertine series, Line-drawn brown-yellow travertine flexible stone is a style in the "warmth and liveliness" direction. It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance; when applied to actual wall surfaces, it can provide warmth in cool-toned spaces and is also suitable for echoing wood and metal.
Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. Names vary across regions: soft stone, flexible stone, flexible stone-like panel, bendable stone basically refer to the same type of product.
The photographed texture characteristics of printed travertine
Observing the real-shot details of the line-drawn brown-yellow travertine flexible stone, it can be seen that it has an overall warm yellow tone, bright and warm. As for the texture specifically, it belongs to the category of "travertine pore texture and natural stone veins, with natural transitions of light and dark layers." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.
Light has a fairly obvious effect on this color: under natural side light, the yellow portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.
If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.3-2.8 | 2.5-2.8 | 330 | 237.6 | 680×1280×1100 | 900 |
| 1200×2400 | 2.3-2.8 | 10.5-11 | 100 | 288 | 1300×2500×600 | 1170 |
| 1200×3000 | 3.5-4 | 17-18 | 80 | 288 | 1280×3100×550 | 1390 |
Optional colors: Grey, white (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, with no wooden substrate used, so there is no hidden risk of formaldehyde release. In terms of physical performance, it features ultra-thin lightweight, high flexibility, bendability, and resistance to cracking and deformation, while also being fire-retardant, waterproof and moisture-proof, stain-resistant and dirt-resistant, and having a certain degree of UV resistance and high and low temperature resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, line-drawn brown-yellow travertine flexible stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.
Key installation and construction points
Construction does not rely on a framing system; after the substrate is leveled, it can be directly adhered. Mature methods are available for flat and curved surfaces, columns and irregular curtain walls, old walls, and insulated walls.
Substrate treatment
Substrate conditions directly determine the final bonding effect, so the substrate acceptance step cannot be skipped: moisture content, flatness and strength must all pass. When the substrate does not meet the standard, it is better to repair first than to install panels directly.
Measurement and layout
At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.
Cutting and hole drilling
When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.
Pasting installation
Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.
What commercial spaces is line-drawn brown-yellow travertine flexible stone suitable for?
Judging from the types of projects already completed, this color mainly appears in the following directions.
Hotel guest rooms and elevator lobbies
Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.
Clubhouses and reception spaces
Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.
Exhibition and temporary exhibition spaces
Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.
Boutique commercial space
Boutique commercial spaces often pursue material layering within a limited area. This type of texture also has light and dark variations within the same color family, allowing the wall to gain thickness without complex shaping.
What product features does line-drawn brown-yellow travertine flexible stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- High degree of form freedom: Bendable, cuttable and capable of full-panel wrapping; curved walls, columns and irregular entrance headers no longer need to be split into multiple small pieces for assembly.
- Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
- Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.
Project selection and procurement points for line-drawn brown-yellow travertine flexible stone
When selecting materials, construction engineering companies, exterior wall engineering general contractors, municipal engineering parties and property developers are most concerned about weather resistance and durability, safety and compliance, and delivery capability for bulk procurement. Flexible stone is designed specifically for outdoor engineering scenarios, focusing on solving the problems of traditional stone in terms of self-weight, falling risk and filing compliance.
The flexible material bonds firmly and has low self-weight, which can significantly reduce the safety risk of stone falling from high-rise facades and meets the safety construction requirements of exterior wall projects. Bulk supply for large projects, expedited production scheduling and on-site technical coordination are supported; exclusive specifications and textures can be customized according to engineering drawings, suitable for large-area exterior wall paving, with flat joints and a unified overall effect.
Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.
How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.
FAQ about line-drawn brown-yellow travertine flexible stone
Can construction be done directly on an old wall?
Yes. Flexible stone requires no keel and no complicated substrate preparation; when the flatness of the original finish meets requirements, it can be applied directly as an overlay. If flatness is insufficient, it is recommended to level or repair locally first. Renovation of old houses does not require large-scale removal of the original wall.
Is there a fire rating?
The product has flame-retardant performance; the specific combustion performance rating is subject to the valid test report for the selected model. For public building projects with clear fire protection requirements, it is recommended to directly request the test documents for the corresponding batch at the selection stage.
What is the typical lead time?
Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
About IGOODS
IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.
The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.
The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. From sampling to bulk delivery, the factory coordinates directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, and after-sales is followed up by the technical team.
Line-drawn brown-yellow travertine flexible stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.