Roma Rose Yellow travertine flexible stone
Roma Rose Yellow travertine is a flexible stone in the travertine series. The color is Roma Rose Yellow. It is lightweight, flexible, and bendable, suitable for walls in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance, construction methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Roma Rose Yellow travertine flexible stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Travertine series
- Craftsmanship: Printed travertine
- Main tone: Warm yellow tone, bright and warm
- Texture features: Travertine pore texture and natural stone veins, with natural transitions between light and dark layers
- Recommended scenarios:Hotels, clubs, showrooms, boutique retail
- Main applications: Building wall
Roma Rose Yellow travertine flexible stone is a flexible stone from the IGOODS Travertine series. This product line is mainly designed around the pores and layering of natural travertine. Roman Rose Yellow Travertine Flexible Stone emphasizes the expression of "warmth and liveliness"—it can provide warmth in cool-toned spaces and is also suitable for echoing wood and metal.
As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. Names vary by region: soft stone, flexible stone, flexible imitation stone panel, and bendable stone basically refer to the same type of product.
The photographed texture characteristics of printed travertine
As can be seen from the actual product photos, this Roman Rose Yellow Travertine Flexible Stone has an overall warm yellow tone, bright and warm, and its texture can be summarized as "travertine pore texture and natural stone grain, with natural transitions between light and dark layers." The grain direction is continuous with natural transitions, without stiff splicing breaks, and it maintains a consistent appearance on the wall under natural or artificial light.
The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.3-2.8 | 2.5-2.8 | 330 | 237.6 | 680×1280×1100 | 900 |
| 1200×2400 | 2.3-2.8 | 10.5-11 | 100 | 288 | 1300×2500×600 | 1170 |
| 1200×3000 | 3.5-4 | 17-18 | 80 | 288 | 1280×3100×550 | 1390 |
Optional colors: Grey, white (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
What determines the scope of application of flexible stone is its substrate composition and physical performance. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, and no wood substrate is used, so there is no hidden risk of formaldehyde release. In terms of physical performance, ultra-thin lightness and bendability are two basic characteristics, from which a series of construction advantages such as no cracking, no deformation and easy fitting to irregular substrates are derived.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
Please note that the performance of flexible stone is closely related to substrate conditions, adhesive selection, and installation workmanship. The table above presents the general characteristics of the material itself. For the engineering indicators of Roman Rose Yellow Travertine Flexible Stone in specific projects, please refer to the valid test report for the selected model and the project technical confirmation.
Key installation and construction points
On the construction side, no keels or complex substrate preparation are required; panels can be installed once the wall is leveled, and both dry bonding and wet bonding are compatible. Flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls can all be handled accordingly.
Substrate treatment
The core requirements for the substrate are "flat, dry and firm": check flatness with a 2 m straightedge; for walls with high moisture content, apply a sealing primer first; sanding and loose layers need to be removed down to a solid substrate. The selection of interface agents differs for different substrates, and it is recommended to confirm according to on-site conditions.
Measurement and layout
Lay out according to the actual wall dimensions, giving priority to placing whole panels in the positions where the eye lingers most, and leaving cut edges in internal corners or closing details. It is recommended to use the same batch of material for the same wall and to mix and lay out once before installation to reduce concentrated color tones.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces are suitable for Roman Rose Yellow Travertine Flexible Stone?
The application of this color in actual projects is relatively concentrated and can generally be grouped into the following types of spaces.
Hotel public areas
In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.
Clubhouses and private dining spaces
In low-illuminance environments, the undulation and texture of the material are more easily perceived than color. The surface undulation of this type of flexible stone can form natural light-dark transitions under light strips or downlights.
Exhibition and temporary exhibition spaces
Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
What product features does Roma Rose Yellow travertine flexible stone have?
- Lightweight dead weight:Compared with natural stone slabs of the same size, the weight of this type of material is an order of magnitude lower, so no separate load-bearing reinforcement is required for the finish.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Project coordination:The design side can support sampling and material selection, and the engineering side can support layout and node treatment, with corresponding people following up from material selection to implementation.
- High degree of form freedom: Bendable, cuttable and capable of full-panel wrapping; curved walls, columns and irregular entrance headers no longer need to be split into multiple small pieces for assembly.
- Complete specifications: In-stock coverage of multiple sizes from 600×1200mm to 1200×3000mm, with custom large boards and extra-long boards also supported, reducing the number of on-site seams.
Project selection and procurement points for Roma Rose Yellow travertine flexible stone
For projects such as large residential development facades, municipal public buildings, school and hospital exterior walls, factory exterior wall renovation, cultural tourism towns, old city renovation and urban lighting, the engineering performance requirements for materials are higher than decorative performance. Flexible stone has engineering-grade characteristics such as weather resistance, aging resistance, waterproofing and stain resistance, and frost-crack resistance.
The flexible material bonds firmly and has low self-weight, which can significantly reduce the safety risk of stone falling from high-rise facades and meets the safety construction requirements of exterior wall projects. Bulk supply for large projects, expedited production scheduling and on-site technical coordination are supported; exclusive specifications and textures can be customized according to engineering drawings, suitable for large-area exterior wall paving, with flat joints and a unified overall effect.
Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.
How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.
Roma Rose Yellow travertine flexible stone FAQ
Is there a fire rating?
The product has flame-retardant performance; the specific combustion performance rating is subject to the valid test report for the selected model. For public building projects with clear fire protection requirements, it is recommended to directly request the test documents for the corresponding batch at the selection stage.
How much material does a project roughly need?
It is advisable to estimate based on the actual layout area plus a 5%–8% waste allowance. Flexible stone can be bent and cut, and waste at irregular positions will be slightly higher than for flat installation. For the specific quantity, drawings can be provided and the manufacturer can assist with the calculation.
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
Can the specifications of Roma Rose Yellow travertine flexible stone be customized?
Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. As a source factory, we support free sample mailing, customization according to drawings, and preferential pricing for engineering bulk orders; for foreign trade, we can provide one-stop supply, with complete qualifications and test reports, nationwide shipping, and after-sales technical support.
Roma Rose Yellow travertine flexible stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.