Italian Wood-Grain Light Gray Travertine Flexible Stone
Italian Wood-Grain Light Gray Travertine is a flexible stone in the Travertine series. Its color is Italian Wood-Grain Light Gray; it is lightweight, thin, flexible, and bendable, and is suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods, and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Italian Wood-Grain Light Gray Travertine Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Travertine series
- Craftsmanship: Printed travertine
- Main tone: Wood tone, natural and warm
- Texture features: Travertine pore texture and natural stone veins, with natural transitions between light and dark layers
- Recommended scenarios:Hotels, clubs, showrooms, boutique retail
- Main applications: Building wall
Italian Wood-Grain Light Gray Travertine Flexible Stone is a flexible stone from the IGOODS Travertine series. This product line is mainly designed around the pores and layering of natural travertine. Italian Wood Grain Light Gray Travertine Flexible Stone emphasizes the expression of "nature and warmth"—it has a warmer wood-like expression and is suitable for spaces that need warmth but do not want the maintenance cost of real wood.
Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. Names vary across regions: soft stone, flexible stone, flexible stone-like panel, bendable stone basically refer to the same type of product.
The photographed texture characteristics of printed travertine
Observing the real photo details of Italian Wood Grain Light Gray travertine flexible stone, it can be seen that it has an overall wood tone, natural and warm. As for the texture, it belongs to the category of "travertine pore texture and natural stone veins, with natural transitions between light and dark layers." The texture density is evenly distributed on the same piece of material, and the texture performance at the edges and corners is basically consistent with the central area.
Under different lighting conditions, the appearance of Italian Wood Grain Light Gray travertine flexible stone will have slight differences—under diffused light the overall effect is stronger, while under directional light the undulations of the texture are enhanced. Designers can use this to control the visual weight of the wall.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.3-2.8 | 2.5-2.8 | 330 | 237.6 | 680×1280×1100 | 900 |
| 1200×2400 | 2.3-2.8 | 10.5-11 | 100 | 288 | 1300×2500×600 | 1170 |
| 1200×3000 | 3.5-4 | 17-18 | 80 | 288 | 1280×3100×550 | 1390 |
Optional colors: Grey, white (other colors customizable)
Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
What determines the scope of application of flexible stone is its substrate composition and physical performance. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, and no wood substrate is used, so there is no hidden risk of formaldehyde release. In terms of physical performance, it features ultra-thin lightness, high flexibility, bendability, and resistance to cracking and deformation. It is also fire-retardant, waterproof and moisture-proof, stain-resistant and dirt-resistant, and has a certain degree of UV resistance and high/low temperature resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges of flexible stone as a category of material. The acceptance basis for Italian Wood-Grain Light Gray Travertine Flexible Stone in specific projects shall be subject to the valid test report of the selected model, the provisions of the supply contract, and the relevant standards of the project location.
Key installation and construction points
No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.
Substrate treatment
Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.
Measurement and layout
Lay out according to the actual wall dimensions, giving priority to placing whole panels in the positions where the eye lingers most, and leaving cut edges in internal corners or closing details. It is recommended to use the same batch of material for the same wall and to mix and lay out once before installation to reduce concentrated color tones.
Cutting and hole drilling
Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.
Pasting installation
Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces is Italian Wood-Grain Light Gray Travertine Flexible Stone suitable for?
Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.
Hotel lobbies and corridors
Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.
Clubhouses and reception spaces
Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.
Showroom and display backdrop
The walls of exhibition spaces are essentially a "background" that needs to support the exhibits rather than compete with them. This type of texture has detail up close and reads as a unified whole from a distance, making it suitable for continuous background surfaces.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
What product features does Italian Wood-Grain Light Gray Travertine Flexible Stone have?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
- No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
- Project coordination: Can assist in calculating quantities and layout plans according to project drawings, and provide technical coordination during the construction phase to reduce on-site rework.
- High degree of form freedom: Bendable, cuttable and capable of full-panel wrapping; curved walls, columns and irregular entrance headers no longer need to be split into multiple small pieces for assembly.
- Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
Project selection and procurement points for Italian Wood-Grain Light Gray Travertine Flexible Stone
When selecting materials, construction engineering companies, exterior wall engineering general contractors, municipal engineering parties and property developers are most concerned about weather resistance and durability, safety and compliance, and delivery capability for bulk procurement. Flexible stone is designed specifically for outdoor engineering scenarios, focusing on solving the problems of traditional stone in terms of self-weight, falling risk and filing compliance.
Specifications and textures can be customized according to drawings, coordinated with large-area paving layouts, with flat joints and a unified overall appearance; the warranty period and specific engineering performance indicators are subject to the contract and the valid test reports of the corresponding products.
From regional municipal projects to nationwide engineering centralized procurement, and then to cross-border export, the supply method for flexible stone needs to be arranged separately according to the nature of the project.
How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.
Italian Wood-Grain Light Gray Travertine Flexible Stone FAQ
How to confirm whether to choose this one or another color pattern in the same series?
It is advisable to also request physical samples of 2–3 candidate color options, compare them under the lighting conditions of the actual space, and then make a decision in combination with the layout effect over a large area. Looking only at a small sample can easily overlook the rhythm of the overall installed surface.
Can the specifications of Italian Wood-Grain Light Gray Travertine Flexible Stone be customized?
Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.
How thick is Italian Wood-Grain Light Gray Travertine Flexible Stone usually?
The common thickness of flexible stone ranges from 2.3–9mm, with considerable variation across different patterns and specifications. For the thickness range of Italian wood-grain light gray travertine flexible stone, refer to the specification table above; the specific thickness is subject to order confirmation.
Can samples be sent first?
Yes. IGOODS provides physical samples for design material selection, texture confirmation and project material evaluation. Due to natural differences between batches, it is recommended to use samples from the same batch for final confirmation before large-area construction.
About IGOODS
IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.
The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.
Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. From sampling to bulk delivery, the factory coordinates directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, with after-sales follow-up by the technical team.
Italian Wood-Grain Light Gray Travertine Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.