Milan White Travertine Flexible Stone

Milan White Travertine is a flexible stone in the Travertine series, with a Milan White color pattern. It is lightweight, thin, flexible, and bendable, and is suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Print hole stone Release:2026-11-13

Product quick information

  • Product name: Milan White Travertine Flexible Stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Travertine series
  • Craftsmanship: Printed travertine
  • Main tone: Beige tone, warm and soft
  • Texture features: Travertine pore texture and natural stone veins, with natural transitions between light and dark layers
  • Recommended scenarios:Hotels, clubs, showrooms, boutique retail
  • Main applications: Building wall

Milan White Travertine Flexible Stone is part of the IGOODS travertine series product line, and the one in this line leaning toward "gentleness and durability." It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance. It looks stable under warm lighting and does not easily show age over long use, so it is more readily prioritized for walls that need to control structural load.

As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. In inquiries and searches, this type of product is also often called soft stone panel, flexible imitation stone finish, bendable stone, or ultra-thin flexible exterior wall stone.

The photographed texture characteristics of printed travertine

As can be seen from the actual product photos, this Milan White Travertine Flexible Stone has an overall beige-apricot tone, warm and soft, and its texture can be summarized as "travertine pore texture and natural stone grain, with natural transitions between light and dark layers." The grain direction is continuous with natural transitions, without stiff splicing breaks, and it maintains a consistent appearance on the wall under natural or artificial light.

Under different lighting conditions, the appearance of the Milan White Travertine Flexible Stone varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.

It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12002.3-2.82.5-2.8330237.6680×1280×1100900
1200×24002.3-2.810.5-111002881300×2500×6001170
1200×30003.5-417-18802881280×3100×5501390

Optional colors: Grey, white (other colors customizable)

Packaging notes: Bulk goods are shipped in wooden crates, making loading/unloading and stacking more stable; for export, export wooden crates are recommended to improve compression resistance and moisture protection for long-distance transport. Specification data are subject to order confirmation.

Customization notes:In addition to standard specifications, custom-shaped dimensions and extra-long panels can be made according to drawings; texture direction and color are subject to the design draft, and thickness can also be adjusted within the standard range.

Material and performance parameters

At the level of material and performance, several points about this type of material need to be clarified first. The material system is inorganic mineral raw materials plus a polymer flexible substrate, containing no asbestos and no heavy metals, and can be used in indoor spaces with air quality requirements. In terms of physical performance, ultra-thin and lightweight and bendability are the two basic characteristics, from which a series of construction advantages derive, such as resistance to cracking, resistance to deformation, and easy adhesion to irregular substrates.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, Milan White Travertine Flexible Stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.

Key installation and construction points

On the construction side, no keels or complex substrate preparation are required; panels can be installed once the wall is leveled, and both dry bonding and wet bonding are compatible. Flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls can all be handled accordingly.

Substrate treatment

Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.

Measurement and layout

At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.

Cutting and hole drilling

Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.

Pasting installation

Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.

Compaction and adjustment

After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.

Edge finishing and acceptance

For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.

Which commercial spaces is Milan White Travertine Flexible Stone suitable for?

Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.

Hotel lobbies and corridors

Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.

Clubhouses and reception spaces

Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.

Showroom and display backdrop

The walls of exhibition spaces are essentially a "background" that needs to support the exhibits rather than compete with them. This type of texture has detail up close and reads as a unified whole from a distance, making it suitable for continuous background surfaces.

Chain store standardization

Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.

What product features does Milan White Travertine Flexible Stone have?

  • Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
  • Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
  • No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
  • Old walls can be directly covered: When the flatness of the original finish meets the requirements, it can be directly covered. Renovation projects do not require large-scale removal of the original wall, reducing demolition and disposal steps.
  • Convenient on-site cutting: The material can be cut on site and adjusted at any time for dimensional deviations, without relying on factory processing as natural stone does.
  • Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.

Project selection and procurement key points for Milan White Travertine Flexible Stone

Architectural designers, landscape designers, and commercial interior designers working indoors and outdoors usually pay more attention at the material selection stage to the realism of the stone imitation effect, the naturalness of the veining, and how well the material matches the spatial style. For such projects, the value of flexible stone is not just "looking like stone," but freeing the material from weight and shaping constraints while retaining the visual language of stone.

Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

What stone-look material to use for irregular wall surfaces, how to construct curved exterior wall stone, and customizable-texture flexible stone are the questions most frequently asked at this stage.

Milan White Travertine Flexible Stone FAQ

Is there support for engineering bulk procurement?

Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.

Can the specifications of Milan White Travertine Flexible Stone be customized?

Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.

Does a difference in thickness lead to different usage scenarios?

There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.

Will the color of samples and bulk supply be consistent?

Flexible stone is made from natural mineral raw materials. Color tone is relatively stable within the same batch, and slight differences may exist between different batches. It is recommended to use materials from the same batch within the same project and to arrange mixed layout during the layout stage.

Is construction of irregular shapes troublesome?

Compared with hard stone, the advantage of flexible stone in irregular positions lies in its ability to wrap the entire surface in one piece, reducing assembly seams. However, the more complex the shape, the higher the requirements for layout and finishing, and it is recommended that experienced installation crews carry out the work.

About IGOODS

IGOODS is a manufacturer of flexible stone, soft stone facing and flexible stone-like panels, supplying projects such as indoor and outdoor architectural decoration, commercial decoration and full renovation, hotel and shop renovation, office building renovation, building facades, municipal exterior wall engineering, campus and hospital renovation, old residential community renovation and cultural tourism landscape creation.

The product supports custom specifications, custom textures and custom colors, and can provide large boards, small boards and special-shaped sizes; for export, OEM branding and packaging customization can be done according to customer requirements, and full-container shipping solutions are provided. On the design side, samples and selection support can be provided; on the engineering side, layout and on-site technical coordination can be provided.

The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. As a source factory, we support free sample mailing, customization according to drawings, and preferential pricing for engineering bulk orders; for foreign trade, we can provide one-stop supply, with complete qualifications and test reports, nationwide shipping, and after-sales technical support.

Milan White Travertine Flexible Stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied