Red Cave Travertine Flexible Stone

Red Cave Travertine Flexible Stone is a printed travertine flexible stone in the IGOODS travertine series. Its main color tone is red, and its surface features the Red Cave texture. It is lightweight, thin, flexible, and bendable, and is suitable for wall surfaces in hotels, homestays, commercial spaces, exhibition halls, and similar settings. This page provides specifications and packaging parameters, material and performance information, construction methods, and acceptance key points, along with applicable scenarios and selection recommendations. Free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Print hole stone Release:2026-11-12

Product quick information

  • Product name: Red Cave Travertine Flexible Stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Travertine series
  • Craftsmanship: Printed travertine
  • Main tone: Red tone, warm and full
  • Texture features: Red Cave texture, with natural surface layering and light-dark transitions, and an appearance that imitates natural materials
  • Recommended scenarios:Hotels, homestays, commercial spaces, showrooms, feature walls
  • Main applications: Building wall

Red Cave Travertine Flexible Stone is part of the IGOODS travertine series product line, and the one in this line leaning toward "temperature and focal point." It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance. Its color tension is clear, making it suitable as a local focal surface rather than large-area application, so it is more readily prioritized for walls that need to control structural load.

As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. In inquiries and searches, this type of product is also often called soft stone panel, flexible imitation stone finish, bendable stone, or ultra-thin flexible exterior wall stone.

The photographed texture characteristics of printed travertine

Observing the real-shot details of the red travertine flexible stone, it can be seen that it has an overall red tone, full and warm. As for the texture specifically, it belongs to the category of "red travertine texture, with natural surface layers and light-dark transitions, and a look imitating natural materials." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.

Under different lighting conditions, the red-hole travertine flexible stone varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.

If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12002.3-2.82.5-2.8330237.6680×1280×1100900
1200×24002.3-2.810.5-111002881300×2500×6001170
1200×30003.5-417-18802881280×3100×5501390

Optional colors: Grey, white (other colors customizable)

Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.

Customization notes: The customization scope covers four items: size, color, texture direction and thickness; after the project party provides layout drawings or renderings, the factory can confirm the achievable specifications.

Material and performance parameters

The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The material system is inorganic mineral raw materials plus a polymer flexible substrate, containing no asbestos and no heavy metals, and can be used in indoor spaces with air quality requirements. In terms of physical performance, ultra-thin lightweight and bendability are two basic characteristics, from which a series of construction advantages derive, such as not cracking, not deforming, and easy conforming to irregular substrates.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

Please note that the performance of flexible stone is closely related to substrate conditions, adhesive selection, and installation workmanship. The table above presents the general characteristics of the material itself. For the engineering indicators of Red Porous Travertine flexible stone in specific projects, please refer to the valid test report for the selected model and the project technical confirmation.

Key installation and construction points

Construction does not rely on a framing system; after the substrate is leveled, it can be directly adhered. Mature methods are available for flat and curved surfaces, columns and irregular curtain walls, old walls, and insulated walls.

Substrate treatment

Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.

Measurement and layout

During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.

Cutting and hole drilling

Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.

Pasting installation

Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.

Compaction and adjustment

After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.

Edge finishing and acceptance

Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.

Which commercial spaces is Red Cave Travertine Flexible Stone suitable for?

Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.

Hotel guest rooms and elevator lobbies

Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.

Homestays and resort spaces

Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.

Chain store standardization

Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.

Exhibition and temporary exhibition spaces

Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.

What product features does Red Cave Travertine Flexible Stone have?

  • Lightweight dead weight:Compared with natural stone slabs of the same size, the weight of this type of material is an order of magnitude lower, so no separate load-bearing reinforcement is required for the finish.
  • Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
  • No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
  • High degree of form freedom:At locations requiring continuous curved surfaces or special-shaped closures, the material's cuttability makes shaping much simpler than with rigid stone.
  • Complete specifications: In-stock coverage of multiple sizes from 600×1200mm to 1200×3000mm, with custom large boards and extra-long boards also supported, reducing the number of on-site seams.
  • Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.

Project selection and procurement key points for Red Cave Travertine Flexible Stone

Projects such as full-house commercial fit-outs, retail shop renovations, hotel and homestay renovations, office building refurbishments, campus and hospital renovations, and residential common-area fit-outs share common traits: large wall areas and uneven substrate conditions. Flexible stone weighs far less than traditional stone, requires no heavy keel substrate, and can significantly reduce wall load-bearing pressure.

Compatible with most existing substrates such as old walls, lightweight walls and insulated wall surfaces, enabling renovation without large-scale demolition and reducing removal and waste disposal steps.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

What low-cost materials to use for exterior wall renovation of commercial buildings, whether old walls can be directly overlaid without demolition, and how to choose fast-installation imitation stone materials for commercial fit-outs are several issues that construction contractors care about most.

Red Cave Travertine Flexible Stone FAQ

How thick is Red Cave Travertine Flexible Stone usually?

The common thickness of flexible stone ranges from 2.3–9mm, with considerable variation across different patterns and specifications. For the thickness range of Red Cave travertine flexible stone, refer to the specification table above; the specific thickness is subject to order confirmation.

Will the color of samples and bulk supply be consistent?

Flexible stone is made from natural mineral raw materials. Color tone is relatively stable within the same batch, and slight differences may exist between different batches. It is recommended to use materials from the same batch within the same project and to arrange mixed layout during the layout stage.

Can Red Cave Travertine Flexible Stone be used on curved walls or cylindrical columns?

Flexible stone itself has bendable characteristics and can wrap curved walls and columns. However, the specific bendable radius depends on the thickness of the selected model and the substrate conditions. It is recommended to make a physical sample for verification before construction, and not to judge solely by the attribute of "flexible material" that all curved surfaces can be constructed directly.

Is there a risk of falling off when used on exterior walls?

The self-weight of flexible stone is far lower than that of traditional stone. When full-adhesion technology is used, the bonding area is large and the stress is uniform, and the risk of falling from high-rise facades is lower than that of dry-hung stone systems. However, construction quality, adhesive selection and substrate treatment also affect final safety, and construction specifications must be followed.

What is the difference between Red Cave Travertine Flexible Stone and natural stone?

The two belong to different types of materials and should not be simply understood as substitutes for each other. The value of natural stone lies in its unreproducible natural attributes; flexible stone emphasizes being lightweight and thin, construction organization, and form adaptability. Material selection should comprehensively consider the design effect, substrate conditions, material weight, transport method, project budget, and usage environment.

About IGOODS

IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.

Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.

The application scope covers indoor and outdoor architectural decoration, full-package commercial fit-out, hotel and shop renovation, office building renovation, residential building facades, municipal exterior wall projects, campus and hospital renovation, old residential community renovation and cultural tourism landscape construction. Direct supply from the source factory, with free sample dispatch, customization according to drawings, batch supply for projects, test reports provided and nationwide shipping, with after-sales technical support.

Red Cave Travertine Flexible Stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied