Red cave 02 travertine flexible stone

Red Cave 02 Travertine Flexible Stone is a printed travertine flexible stone in the IGOODS travertine series. Its main color tone is red, and its surface features the Red Cave 02 texture. It is lightweight, thin, flexible, and bendable, and is suitable for wall surfaces in hotels, homestays, commercial spaces, exhibition halls, and similar settings. This page provides specifications and packaging parameters, material and performance information, construction methods, and acceptance key points, along with applicable scenarios and selection recommendations. Free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Print hole stone Release:2026-11-12

Product quick information

  • Product name: Red cave 02 travertine flexible stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Travertine series
  • Craftsmanship: Printed travertine
  • Main tone: Red tone, warm and full
  • Texture features: Red Cave 02 texture, with natural surface layering and light-dark transitions, and an appearance that imitates natural materials
  • Recommended scenarios:Hotels, homestays, commercial spaces, showrooms, feature walls
  • Main applications: Building wall

In IGOODS's travertine series, Red cave 02 travertine flexible stone is a style in the "temperature and focal point" direction. It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance; when applied to actual wall surfaces, its color tension is clear, making it suitable as a local focal surface rather than large-area application.

Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. Names vary across regions: soft stone, flexible stone, flexible stone-like panel, bendable stone basically refer to the same type of product.

The photographed texture characteristics of printed travertine

In the real photo, the surface of Red Cave 02 Travertine Flexible Stone appears in a red tone, warm and full. Its texture is characterized by "Red Cave 02 texture, with natural transitions in surface layering and light-dark variation, and a look that imitates natural material." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.

The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.

Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12002.3-2.82.5-2.8330237.6680×1280×1100900
1200×24002.3-2.810.5-111002881300×2500×6001170
1200×30003.5-417-18802881280×3100×5501390

Optional colors: Grey, white (other colors customizable)

Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.

Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.

Material and performance parameters

What determines the scope of application for flexible stone is its substrate composition and physical performance. In terms of material, it is a composite of natural mineral raw materials and a polymer flexible substrate, an inorganic ecological material with zero formaldehyde, meeting the environmental requirements of home decoration, commercial decoration, and outdoor projects. Light weight, thin panels, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also offers flame retardancy, moisture resistance, and stain resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, red cave 02 travertine flexible stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.

Key installation and construction points

No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.

Substrate treatment

Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.

Measurement and layout

During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.

Cutting and hole drilling

Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.

Pasting installation

Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.

Compaction and adjustment

After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.

Edge finishing and acceptance

For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.

Which commercial spaces is Red Cave 02 Travertine Flexible Stone suitable for?

Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.

Hotel guest rooms and elevator lobbies

Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.

Homestay guest rooms and public areas

Vacation-oriented spaces emphasize a sense of relaxation and handmade traces, and the randomness of this type of texture fits the "unforced" spatial character perfectly.

Boutique commercial space

Boutique commercial spaces often pursue material layering within a limited area. This type of texture also has light and dark variations within the same color family, allowing the wall to gain thickness without complex shaping.

Exhibition and temporary exhibition spaces

Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.

What product features does Red Cave 02 Travertine Flexible Stone have?

  • Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
  • Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
  • No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
  • Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
  • Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.
  • Old walls can be directly covered: When the flatness of the original finish meets the requirements, it can be directly covered. Renovation projects do not require large-scale removal of the original wall, reducing demolition and disposal steps.

Project selection and procurement key points for Red Cave 02 Travertine Flexible Stone

Projects such as full-house commercial fit-outs, retail shop renovations, hotel and homestay renovations, office building refurbishments, campus and hospital renovations, and residential common-area fit-outs share common traits: large wall areas and uneven substrate conditions. Flexible stone weighs far less than traditional stone, requires no heavy keel substrate, and can significantly reduce wall load-bearing pressure.

The material is flexible, crack-resistant, and impact-resistant, and can adapt to complex site environments. New installers can get up to speed quickly, which helps compress the schedule and labor costs. Fire resistance, moisture resistance, and weather resistance indicators also meet the requirements of routine project acceptance.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

What low-cost materials to use for exterior wall renovation of commercial buildings, whether old walls can be directly overlaid without demolition, and how to choose fast-installation imitation stone materials for commercial fit-outs are several issues that construction contractors care about most.

Red Cave 02 Travertine Flexible Stone FAQ

Can Red Cave 02 Travertine Flexible Stone be used on curved walls or cylindrical columns?

Flexible stone itself has bendable characteristics and can wrap curved walls and columns. However, the specific bendable radius depends on the thickness of the selected model and the substrate conditions. It is recommended to make a physical sample for verification before construction, and not to judge solely by the attribute of "flexible material" that all curved surfaces can be constructed directly.

Is there a risk of falling off when used on exterior walls?

The self-weight of flexible stone is far lower than that of traditional stone. When full-adhesion technology is used, the bonding area is large and the stress is uniform, and the risk of falling from high-rise facades is lower than that of dry-hung stone systems. However, construction quality, adhesive selection and substrate treatment also affect final safety, and construction specifications must be followed.

Is flexible stone considered "fake stone"?

Flexible stone belongs to an independent category within building decorative materials and implements JG/T 540-2017 "Flexible Faux Stone Decorative Materials for Buildings." It uses mineral raw materials to reproduce the visual language of stone, and its positioning is "another way of expressing stone," rather than a counterfeit.

What is the construction process for Red Cave 02 Travertine Flexible Stone?

The conventional process is substrate inspection, on-site measurement and layout, material cutting, pasting, compaction and position adjustment, and edge and corner finishing. The specific plan needs to be determined based on substrate type, wall dimensions and use environment.

About IGOODS

IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.

The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.

From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. Direct supply from the source factory, with free sample mailing, customization according to drawings, batch supply for projects, test reports and nationwide shipping, and after-sales technical support.

Red cave 02 travertine flexible stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied