Resort hotel (all spaces) 3200㎡ printed rough-faced granite wall construction case

IGOODS provided printed rough-faced granite as wall material for a resort hotel (full space) project in Bazhong City, Sichuan Province, using the full-adhesion method for direct wall application without a furring base. The project's wall surface is estimated at approximately 3,200㎡, with material specifications of 1220×2930mm, thickness 2.5–3.5mm, and single-piece weight of approximately 17kg, conforming to JG/T 540-2017 "Flexible Stone-like Decorative Facing Materials for Buildings."

Published time:

IGOODS provided for a resort hotel (full space) project in Bazhong City, Sichuan Province,Printed rough-faced graniteAs a wall material, it is applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 3,200㎡, material specifications 1220×2930mmThickness 2.5–3.5mmThe weight of a single piece is about 17kg; implement JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"The application images in this case total 13 pieces.

  • 1220×2930mm Panel specifications
  • 2.5–3.5mm thickness
  • Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
  • Approx. 3,200 ㎡ Wall area (◆budget estimate)
  • 13 pieces Application image
  • JG/T 540-2017 Implementation standards

Project file

Project item Content
Project typeResort hotel (all spaces)
Application locationCorridor / connecting corridor (including semi-outdoor), lobby / full-height main wall, guest room / villa, dining and pool bar counter
Materials usedPrinted rough-faced granite (Slate and natural mountain stone)
Material specifications1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationBazhong City, Sichuan Province
Wall areaApprox. 3,200 ㎡ (◆ budget estimate)
Actual photo record13 pieces (on-site shooting)

Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.

1. Customer industry usage scenario: the real wall requirements of a resort hotel (all spaces)

  1. Semi-outdoor interfaces are the biggest variable Interfaces such as the pool bar, terrace and covered corridor are directly exposed to sun, rain and high humidity,Must use weather-resistant adhesive, the edges need waterproofing. If interior methods are directly applied to semi-outdoor areas, edge warping will appear within two to three years.
  2. Stability under high humidity and salt-containing air In tropical and coastal projects, air humidity and salt content are high,The material not absorbing water and not developing mold is a prerequisite; Metal fittings and edge trim profiles must be selected according to the corrosion protection grade; otherwise, the hardware will fail before the finish does.
  3. The same material must hold up at different scales In the same project, the clear width of a corridor may be only 1.5 meters, while the lobby is two stories high. The same material must work at both scales:The texture must hold up up close, and the overall tone must be stable from a distance..
  4. Arches and wave shapes are the stylistic framework Continuous arches, wavy ceilings, and shaped column cladding are the main formal language of this type of project. Traditional hard finishes can only be pieced together in sections,Joint lines will appear densely along the turns of the arch; Flexible material can wrap the entire piece, keeping the contour continuous.
  5. Irregular door openings and niches are dense, with a large amount of closing work Niches, round windows, arches, light coves, decorative niches—resort projects put the shapes on the wall,Every shape is a termination pointThe number of closure details is usually more than twice that of an ordinary hotel, and this is where construction organization is mainly difficult.
  6. For phased openings, materials need to be scheduled for production by batch Resort hotels have large building areas and are often delivered in phases by zone.The same space must use the same batch, when entering the site in batches, the batch must be locked at the production scheduling stage; do not wait until materials are needed on site to place the order.

II. Material comparison: why printed rough-faced granite

Why choose printed coarse-grained granite

The characteristics of matte-finish granite areUniform granularity with no clear texture directionThis is an advantage in resort projects: the same material is used in five completely different spaces—corridor, lobby, guest room, restaurant, and pool bar. If the texture has strong directionality (such as the diagonal bands of slate), the directions will conflict with each other in different areas; bush-hammered granite has no direction,Any way it is cut works.

To match the large number of curves and arch shapes of the Southeast Asian style, the material also needs to be able to wrap the entire panel. The grains of the rough-faced granite are fine enough that no texture stretching distortion occurs when bending arcs—this is the main reason for choosing it over a coarse texture.

Slate and Natural Mountain Stone providesLight sand, warm gray, beige-brownand other colors, with the rest customizable; the visual tone of this case is based onLight sand matte surfaceas the base tone.

2.2 Material performance parameters

Project Parameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant;The specific grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions.
Bonding methodFull-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner.
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'

Specifications and packaging parameters

Specifications (mm) Thickness (mm) Approx. weight per panel (kg) Wooden crate packaging (pieces/crate) Area per box (㎡)
1220×29302.5–3.51770Approx. 250.2

The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.

3. Configuration plan

3.1 Allocate materials by spatial function

Space / Location Suggested materials Specifications Key focus
Corridor / connecting corridor (including semi-outdoor)Flexible Stone(weather-resistant)1220×2930mmWeather-resistant adhesive, edge finishing and waterproofing
Lobby / full-height main wallFlexible stone (large panel format)Same as aboveLarge-scale overall effect, ceiling termination
Guest rooms / villasFlexible stone (same color family)Same as aboveBatch consistency, hole layout
Food and beverage and pool barSame as above (the countertop is a key close-view surface)Same as aboveWater-resistant wiping, stain resistance, rounded corner finishing

3.2 Quantity and project schedule estimate

Dosage formula (★engineering experience basis):

Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up)
Item Calculation Result
Wall area of this project—Approx. 3,200 ㎡
Wastage rate★Value by spatial complexity10%
Material preparation area3,200 × 1.10Approx. 3,520 ㎡
Number of wooden crates3,520 ÷ 250.2 → Round up15 boxes

Construction period estimate (◆ estimate):

Stage Schedule
Substrate treatment (knock out hollow areas + leveling + drying)Substrate treatment usually accounts for about 1/3 of the total construction period
Layout setting-out★The denser the holes, the greater the layout workload
Adhesive mounting on wall★2 people can complete 60-100㎡ per day; 3,200㎡ ÷ 80㎡/day ≈ 40 days
Finishing · Cleaning · Acceptance★Project experience
Total (budget estimate)Approx. 42 days(range 30–55 days)

Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.

A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.

3.3 Material Configuration

Stage Materials Function Basis
BondingSpecial adhesive,Full adhesion methodEnsure the finish and substrate are fully bondedProduct technical requirements; weather-resistant adhesive for outdoor use
SubstrateLeveling materials (selected according to substrate condition)Provide a flat, dry substrate free of hollowingSubstrate flatness directly affects appearance
Close upEdge trim / metal trimTreat internal and external corners, door frames, and wall base closures★Engineering Experience Practices
CuttingUtility knife / special cutting toolOn-site cutting according to the layout drawingOn-site secondary cutting is standard practice

IV. Construction process and acceptance control points

Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.

Step 1 · Base treatment

Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.

★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.

Step 2 · Measurement and layout

It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.

Step 3 · Cutting

Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.

Step 4 · Adhesive application and wall installation (full adhesion method)

RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.

Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.

Step 5 · Joints and edge finishing

  • Tight-joint: The seam lines are the finest, suitable for regular walls;
  • Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
  • Metal trim: Used for closing edges and emphasizing lines.

Step 6 · Cleaning and self-inspection

Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.

Step 7 · Delivery acceptance

Control points Standard value or practice Basis
Substrate dryness / hollowingdry, free of floating dust, no hollowing; if not compliant, repair first★Engineering Experience Practices
Substrate flatnessLeveling in place, repair deficiencies first★Engineering Experience Practices
Bonding methodFull bonding method, adhesive selected according to product instructionsProduct technical requirements
Material execution standardJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'Product execution standard
Internal and external corners and closuresEdge trim / metal trim closure, trim straight and true★Engineering Experience Practices
Cutouts and panelsThe cutout position is coaxial with the panel, and the edges are not chipped★Engineering Experience Practices
Color difference controlUse the same batch of material for the same wall surface in the same space★Engineering Experience Practices
Joint straightnessAlign joint lines within the same space, with no obvious misalignment visually★Engineering Experience Practices
Environmental protection indicatorsNo added formaldehyde, no asbestosProduct information (subject to the test report for the model)

V. Image display and application description

Total application photos of this project 13 pieces; all photographed on site at the project, covering guest room corridor, lobby living room, guest room (curved wall), poolside breakfast area, restaurant, connecting corridor, pool bar counter, poolside columns, guest room (arched headboard), guest room (irregular window), lobby entrance, lobby display area, lobby front desk and other areas.

Guest room corridor, warm beige textured wall, wall lights and plants
Figure 1 · Guest room corridor, warm beige textured wall, wall lights and plants
Lobby lounge area, warm beige curved wall and sofa
Figure 2 · Lobby lounge area, warm beige curved wall and sofa
Bedroom, warm beige textured headboard wall and terrace daylight
Fig. 3 · Bedroom, warm beige textured headboard wall and terrace daylight
Work and rest area, warm beige textured wall with wooden table and chairs
Figure 4 · Work lounge area, warm beige textured wall and wooden table and chairs
Dining area, warm beige curved column wall and wavy ceiling
Figure 5 · Dining area, warm beige curved column wall and wavy ceiling
Corridor: warm beige arched niche with dark floor
Figure 6 · Corridor, warm beige arched niche and dark floor
Bar beside the pool, warm beige curved counter body and wood-colored canopy
Figure 7 · Poolside bar, warm beige curved counter body and wood-colored ceiling
Pool-side cylindrical column, warm beige texture finish and plants
Figure 8 · Cylindrical column beside pool, warm beige textured finish and plants
Bedroom, warm beige arched headboard background and bed
Figure 9 · Bedroom, warm beige arched headboard backdrop and bed
Bedroom close-up, warm beige textured wall and display niche
Figure 10 · Bedroom close-up, warm beige textured wall and display niche
Entrance foyer, warm beige curved wall with dark door leaves
Figure 11 · Entrance foyer, warm beige curved wall and dark door
Elevator lobby, warm beige textured finish with wood-colored openwork decoration
Figure 12 · Elevator lobby, warm beige textured finish and wood-colored openwork decoration
Lobby side table, warm beige curved backdrop wall and plants
Figure 13 · Lobby side counter, warm beige curved background wall and plants

VI. Communication and confirmation process

For the wall project of the resort hotel (all spaces) project, communication mainly focused on three things:Whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.

Owner: Ours is a resort hotel (all spaces), and we want the wall to have the texture a resort hotel (all spaces) should have. What do you suggest?

IGOODS: It is recommended to first clarify three things: gloss level (matte, not high-gloss), texture strength (weak texture is more enduring), and whether curved shapes are required. For materials in the slate and natural mountain stone series such as printed rough-faced granite, the light sand rough surface performs relatively stably and can be adapted.

Owner: How should cutouts and panel joints be handled?

IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.

Owner: What should be noted about the base layer?

IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.

Owner: Will it be easy to clean later?

IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.

Owner: To what extent is it dirt-resistant and scratch-resistant?

IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.

What was confirmed in this communication?

  • Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
  • Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
  • Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
  • Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
  • Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.

Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.

Seven, usage effects and daily maintenance

7.1 What is the perception of space?

The most outstanding performance of this material in projects isBrought the "outdoor feel" indoorsThe granular light sand tone itself is close to coastal rocks; combined with greenery, wood grilles, and arched door openings, the space will naturally present a resort atmosphere, without the need for extra decoration to emphasize style.

Semi-outdoor interfaces are another key point: locations such as pool bars and covered walkways are exposed to sun and rain and are adjacent to water surfaces; after construction with weather-resistant adhesive,Non-absorbent, does not mold, it matches the surrounding greenery and pool very well.

7.2 Daily maintenance

Scenario Treatment method
Daily floating dustdry cloth or feather duster
Water stains / beverage stainsWipe with clean water or neutral detergent
Oily stainsNeutral cleaner,Avoid strong solvents
Minor scratchesJudged by texture type; textured surfaces themselves are relatively tolerant of minor marks
Prohibited practicesStrong acid and strong alkali solvents, steel wool, grinding machines

Maintenance-related characteristics of the material itself (from product documentation):

  • Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
  • Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
  • Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
  • Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.

7.3 On-site Recheck After Delivery

Review items Inspection content Basis for determination
Joints and closuresWhether joint lines are straight, whether lines are aligned, whether corners are properly executedno obvious misalignment by visual inspection
Cutouts and panelsWhether the switch and socket are coaxial with the cutout and whether the edges are chippedPanel coverage with no exposed edges
Whole wallWhether there is hollowing or obvious color differenceHollowing rate 0; no visible color difference on the same wall

Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.

7.4 Cost Reference

Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.

Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:

Item Calculation Result
Lower limit of material amount3,200 × 25Approx. RMB 80,000
Upper limit of material amount3,200 × 300Approx. RMB 960,000

Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.

VIII. Common questions (FAQ)

Why do Southeast Asian-style resort hotels often use stone walls instead of paint?

BecauseThe texture itself carries the styleThe atmosphere of this type of project is created jointly by material texture, woodwork, greenery, and natural light; painted walls are too flat and cannot support large-scale double-height spaces; the granular feel of stone walls forms delicate light-and-shade changes under natural light and connects more naturally with the outdoor landscape.

The walls beside the pool are damp for long periods—will they develop mold?

The material does not absorb water and is resistant to mold, making it suitable for humid environments; however,Semi-outdoor interfaces must use weather-resistant adhesive and perform edge sealing and waterproofing. Additionally, the air quality in the swimming pool area has a greater impact on metal accessories, and the selection of edge lines and hardware should be made according to anti-corrosion requirements.

If the same material is used throughout all spaces in a project, will it look monotonous?

No, provided thatForm should have variationIn this project, the same material is used on a flat wall in the corridor, a wavy curved wall in the lobby, an arched backdrop in the guest room, and a curved facade at the bar—the texture is the same but the forms differ, and the spatial feeling presented differs greatly. What truly becomes monotonous is the repetition of "same material + same form."

For a project of several thousand square meters, how should the construction schedule be arranged?

Enter the site in batches by area. Resort hotels are usually delivered in phases by area,The same space must use the same batch of material; therefore the batch must be locked at the production scheduling stage; the closure workload involving large numbers of curved and arched shapes is more than twice that of an ordinary hotel, and this is where the focus of construction organization lies. The estimated budget for this project is approximately 3,200㎡.

IX. Project File and Contact Information

Project file Content
Project typeResort hotel (all spaces)
Materials usedPrinted rough-faced granite (Slate and natural mountain stone)
Material specifications1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg
Packaging70 Sheets/Case | Approximately 250.2㎡/Case
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationBazhong City, Sichuan Province
Wall areaApprox. 3,200 ㎡ (◆ budget estimate)
Actual photo record13 pieces

Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door

  • Phone / WeChat / WhatsApp: 19136341389
  • Email: 19136341389@163.com
  • Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
  • Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response

Content and scope statement: This page records the wall material selection and construction process for this resort hotel (all spaces). The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆Estimate" are estimated values for area, schedule, and cost calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.

Find the appropriate wall expression for your project.

Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.

Consulting project material selection ↗
Contact phone number Product Catalog Free Sample
WeChat ID copied