Hotel corridor 180㎡ white banana leaf (three-dimensional relief) wall construction case
IGOODS provided white banana leaf (three-dimensional relief) as wall material for a hotel corridor project in Shehong City, Sichuan Province, using the full-adhesion method for direct wall application without a furring base. The project's wall surface is estimated at approximately 180㎡, with material specifications of 1220×2930mm, thickness 2.5–3.5mm, and single-piece weight of approximately 17kg, conforming to JG/T 540-2017 "Flexible Stone-like Decorative Facing Materials for Buildings."
IGOODS provided for a hotel corridor project in Shehong City, Sichuan Province, Hotel corridor project provided by White Banana leaf (three-dimensional relief) as a wall material, applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 180㎡, material specifications 1220×2930mm, thickness 2.5–3.5mm, the weight of a single piece is about 17kg; implement JG/T 540-2017 "Flexible Stone-like Facing Materials for Buildings". The application images in this case total 4 pieces.
- 1220×2930mm Panel specifications
- 2.5–3.5mm thickness
- Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
- Approx. 180 ㎡ Wall area (◆budget estimate)
- 4 pieces Application image
- JG/T 540-2017 Implementation standards
Project file
| Project item | Content |
|---|---|
| Project type | Hotel corridor |
| Application location | Walkway main wall / long corridor wall, perimeter of door frames / fire hydrant openings, wall base 0–600mm, end-feature wall / far-end feature |
| Materials used | White banana leaf (three-dimensional relief) (art and three-dimensional texture) |
| Material specifications | 1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg |
| Construction process | Full bonding method, direct wall installation after leveling, no keel required |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Project location | Shehong City, Sichuan Province |
| Wall area | Approx. 180 ㎡ (◆ preliminary estimate) |
| Actual photo record | 4 pieces (on-site photography) |
Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.
1. Customer industry usage scenario: the real wall requirements of hotel corridors
- Door casings and door openings are dense, and closing details are the main battleground. There is a door every 3–5 meters in the guest room corridor; door frames, fire hydrants, access panels and wall junctions are where termination details are most concentrated. A single termination deviation is inconspicuous,but when a row of doors is connected, it forms a visible "sawtooth line" to the naked eye.——This is the detail on the corridor wall that is most likely to be deducted points.
- Side lighting magnifies the texture relief Walkway lighting is mostly arranged on one side (light strip washing one wall, wall lamps on the other); directional light reinforces the shadow relief of the wall texture.Heavy texture will look oppressive in a corridor with a clear width of 1.5 meters; when selecting materials, balance close-up detail with overall appearance from a distance.
- Limited clear width; material thickness and joint lines should be restrained Walkway clear width is often 1.2–1.8 meters, and walls account for a much higher proportion of the guest's field of view than in the lobby. Thick panels and dense joints further compress the sense of space,Thin type, large panel format, few seamsThese are the basic requirements for the walkway.
- The wall base is the impact zone for luggage carts and linen carts Luggage carts, linen carts and vacuum cleaners pass repeatedly,Wall base 0–600mm, especially at cornersWears fastest. For this section, it is recommended to install a wall guard or reserve spare material for easy local replacement.
- Pipelines are dense in the ceiling, and clearance must not be encroached upon. The walkway ceiling contains air-conditioning ducts, sprinklers, smoke detectors and access panels, so thin wall materials are preferable,The closing method must not, in turn, compress the ceiling clearance.
- Batch consistency when in the same color family as guest room interior walls If the walkway walls and guest room interior walls use the same color family,Standing at the guest room doorway, both walls can be seen at the same time. If different batches are used at two places, the color difference will be directly compared.
II. Material comparison: why white banana leaf (three-dimensional relief)
2.1 Why choose the white banana leaf (three-dimensional bas-relief)
Banana leaf isThree-dimensional reliefSimilar texture, not a flat printed pattern—the leaves have real undulation and thickness, casting shadows under side light. This type of texture is especially suitable in corridors: walkways are already narrow and lack content, and a white wall with undulation is far more visually interesting than a flat white wall, andEstablish layering without relying on color.
Choosing white rather than color is to let the texture speak for itself. Colored three-dimensional textures tend to look cheap when viewed up close, while white leaves all the attention to light and shadow. In this project, one side of the corridor is a glass curtain wall, and natural light sweeps in from the side.The shadows of the leaves move with time, this is an effect that solid-color paint cannot provide.
Art and three-dimensional texture providesMatte white, milky white, light gray-whiteand other colors, with the rest customizable; the visual tone of this case is based onMatte whiteas the base tone.
2.2 Material performance parameters
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant;The specific grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions. |
| Bonding method | Full-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner. |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area per box (㎡) |
|---|---|---|---|---|
| 1220×2930 | 2.5–3.5 | 17 | 70 | Approx. 250.2 |
The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.
3. Configuration plan
3.1 Allocate materials by spatial function
| Space / Location | Suggested materials | Specifications | Key focus |
|---|---|---|---|
| Walkway main wall / long corridor wall | Flexible Stone(large panel format) | 1220×2930mm | Straight joint lines, aligned across the whole wall |
| Perimeter of door casing / fire hydrant opening | Flexible stone (with matching edge trim) | Same as above | Interface with door frames, closure of internal and external corners |
| Wall base 0–600mm | Same as above, or add anti-collision wall protection | Same as above | Luggage carts and linen carts collisions |
| End-view wall / terminal landscaping | Flexible stone (key surfaces) | Same as above | Lighting coordination, texture direction |
3.2 Quantity and project schedule estimate
Dosage formula (★engineering experience basis):
Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up) | Item | Calculation | Result |
|---|---|---|
| Wall area of this project | — | Approx. 180 ㎡ |
| Wastage rate | ★Value by spatial complexity | 10% |
| Material preparation area | 180 × 1.10 | Approx. 198 ㎡ |
| Number of wooden crates | 198 divided by 250.2 → rounded up | 1 case |
Construction period estimate (◆ estimate):
| Stage | Schedule |
|---|---|
| Substrate treatment (knock out hollow areas + leveling + drying) | Substrate treatment usually accounts for about 1/3 of the total construction period |
| Layout setting-out | ★The denser the holes, the greater the layout workload |
| Adhesive mounting on wall | ★2 people in a group can complete 60-100㎡; 180㎡ ÷ 80㎡/day ≈ 2 days |
| Finishing · Cleaning · Acceptance | ★Project experience |
| Total (budget estimate) | Approx. 12 days(range 8–16 days) |
Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.
A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.
3.3 Material Configuration
| Stage | Materials | Function | Basis |
|---|---|---|---|
| Bonding | Special adhesive,Full adhesion method | Ensure the finish and substrate are fully bonded | Product technical requirements; weather-resistant adhesive for outdoor use |
| Substrate | Leveling materials (selected according to substrate condition) | Provide a flat, dry substrate free of hollowing | Substrate flatness directly affects appearance |
| Close up | Edge trim / metal trim | Treat internal and external corners, door frames, and wall base closures | ★Engineering Experience Practices |
| Cutting | Utility knife / special cutting tool | On-site cutting according to the layout drawing | On-site secondary cutting is standard practice |
IV. Construction process and acceptance control points
Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.
Step 1 · Base treatment
Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.
★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.
Step 2 · Measurement and layout
It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.
Step 3 · Cutting
Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.
Step 4 · Adhesive application and wall installation (full adhesion method)
RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.
Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.
Step 5 · Joints and edge finishing
- Tight-joint: The seam lines are the finest, suitable for regular walls;
- Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
- Metal trim: Used for closing edges and emphasizing lines.
Step 6 · Cleaning and self-inspection
Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.
Step 7 · Delivery acceptance
| Control points | Standard value or practice | Basis |
|---|---|---|
| Substrate dryness / hollowing | dry, free of floating dust, no hollowing; if not compliant, repair first | ★Engineering Experience Practices |
| Substrate flatness | Leveling in place, repair deficiencies first | ★Engineering Experience Practices |
| Bonding method | Full bonding method, adhesive selected according to product instructions | Product technical requirements |
| Material execution standard | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' | Product execution standard |
| Internal and external corners and closures | Edge trim / metal trim closure, trim straight and true | ★Engineering Experience Practices |
| Cutouts and panels | The cutout position is coaxial with the panel, and the edges are not chipped | ★Engineering Experience Practices |
| Color difference control | Use the same batch of material for the same wall surface in the same space | ★Engineering Experience Practices |
| Joint straightness | Align joint lines within the same space, with no obvious misalignment visually | ★Engineering Experience Practices |
| Environmental protection indicators | No added formaldehyde, no asbestos | Product information (subject to the test report for the model) |
V. Image display and application description
Total application photos of this project 4 pieces; all photographed on site at the project, covering passage panorama, corridor perspective, long corridor, passage details and other areas.
VI. Communication and confirmation process
For the wall works of hotel corridor projects, communication mainly revolves around three things:Whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.
Owner: Ours is a hotel corridor, and we want the wall to have the texture a hotel corridor should have. What do you suggest?
IGOODS: It is recommended to first clarify three things: gloss level (matte, not high-gloss), texture strength (weak texture is more enduring), and whether curved shapes are required. For materials in the art and three-dimensional texture series such as white banana leaf (three-dimensional relief), matte white performs relatively stably and can be adapted.
Owner: How should cutouts and panel joints be handled?
IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.
Owner: What should be noted about the base layer?
IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.
Owner: Will it be easy to clean later?
IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.
Owner: To what extent is it dirt-resistant and scratch-resistant?
IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.
What was confirmed in this communication?
- Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
- Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
- Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
- Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
- Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.
Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.
Seven, usage effects and daily maintenance
7.1 What is the perception of space?
After the three-dimensional texture is installed, the corridor changes from "a place to pass through" to "a place where people stop for a look." During the day, natural light comes in from the glass curtain wall side, and the leaves cast soft shadows; at night, the wall lamp and wall-washing light shine from the other side, and the shadow direction reverses.The same wall presents two completely different layers.
A more practical point:What this wall solves is the problem of the corridor lacking content. The usual practice is to hang paintings and display decorations in the corridor, but what the corridor really lacks is 'the wall itself having content.' The embossed texture makes the wall itself a landscape, no longer needing additional decorative items to fill in.
7.2 Daily maintenance
| Scenario | Treatment method |
|---|---|
| Daily floating dust | dry cloth or feather duster |
| Water stains / beverage stains | Wipe with clean water or neutral detergent |
| Oily stains | Neutral cleaner,Avoid strong solvents |
| Minor scratches | Judged by texture type; textured surfaces themselves are relatively tolerant of minor marks |
| Prohibited practices | Strong acid and strong alkali solvents, steel wool, grinding machines |
Maintenance-related characteristics of the material itself (from product documentation):
- Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
- Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
- Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
- Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.
7.3 On-site Recheck After Delivery
| Review items | Inspection content | Basis for determination |
|---|---|---|
| Joints and closures | Whether joint lines are straight, whether lines are aligned, whether corners are properly executed | no obvious misalignment by visual inspection |
| Cutouts and panels | Whether the switch and socket are coaxial with the cutout and whether the edges are chipped | Panel coverage with no exposed edges |
| Whole wall | Whether there is hollowing or obvious color difference | Hollowing rate 0; no visible color difference on the same wall |
Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.
7.4 Cost Reference
Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.
Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:
| Item | Calculation | Result |
|---|---|---|
| Lower limit of material amount | 180 × 25 | Approx. RMB 5,000 |
| Upper limit of material amount | 180 × 300 | Approx. RMB 50,000 |
Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.
VIII. Common questions (FAQ)
What is the thickness of the three-dimensional relief texture, and will it chip?
The embossed undulation isEmbossed moldingthe overall thickness is consistent with traditional flexible stone (on the order of 2.5–3.5 mm), and the undulation is only a surface shape; there is no protruding solid. For corridor wall bases, it is still recommended to install wainscoting or reserve spare material, because luggage carts and linen carts will repeatedly rub against the 0–600 mm section.
Will the white three-dimensional texture quickly show dirt?
The surface is dense and not prone to retaining dirt; daily dust can be handled with a dry cloth or feather duster. What really needs protection isLocalized damage at the wall base after impact——When replacing the local embossed texture, there will be subtle differences in the surface relief of the new and old materials, so it is most reliable to reserve the same batch of spare materials from the beginning.
How should corridor lighting be configured to bring out the texture?
The key isSide lighting; it is not direct frontal lighting. Only when a wall lamp or wall-washing light shines obliquely from one side will the leaves cast shadows; if only top downlights shine vertically downward, the texture will be flattened and look much like a flat wall. It is recommended to settle this at the lighting positioning stage.
Is this wall the same material as the leaf-pattern floor inlay?
No.The wall uses flexible stone three-dimensional texture panels; the floor is stone inlay, the two echo each other in pattern and are separated in material. Stone is used on the floor because the requirements for wear resistance and easy cleaning are higher, while flexible material is used on the wall because it must wrap shapes and control dead weight.
IX. Project File and Contact Information
| Project file | Content |
|---|---|
| Project type | Hotel corridor |
| Materials used | White banana leaf (three-dimensional relief) (artistic and three-dimensional texture) |
| Material specifications | 1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg |
| Packaging | 70 Sheets/Case | Approximately 250.2㎡/Case |
| Construction process | Full bonding method, direct wall installation after leveling, no keel required |
| Implementation standards | JG/T 540-2017 'Building Flexible Stone-faced Decorative Material' |
| Project location | Shehong City, Sichuan Province |
| Wall area | Approx. 180 ㎡ (◆ preliminary estimate) |
| Actual photo record | 4 pieces |
Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door
- Phone / WeChat / WhatsApp: 19136341389
- Email: 19136341389@163.com
- Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
- Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response
Content and scope statement: This page records the wall material selection and construction process for this hotel corridor. The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆EstimateThe area, schedule, and cost are estimated values calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.
Relevant Materials and Solutions
Flexible Stone Solutions Selection Guides Request sample quotationFind the appropriate wall expression for your project.
Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.