Hotel guest room 1260㎡ cherry wood grain wall construction case

IGOODS provided cherry wood grain flexible stone as wall material for a hotel guest room project in Pengzhou City, Sichuan Province, using the full-adhesion method for direct wall application without a furring base. The project's wall surface is estimated at approximately 1,260㎡, with material specifications of 1220×2930mm, thickness 2.5–3.5mm, and single-piece weight of approximately 17kg, conforming to JG/T 540-2017 "Flexible Stone-like Decorative Facing Materials for Buildings."

Published time:

IGOODS provided for a hotel guest room project in Pengzhou City, Sichuan Province, Hotel guest rooms project provided by Cherry Wood grain Flexible Stone as a wall material, applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 1,260㎡, material specifications 1220×2930mm, thickness 2.5–3.5mm, the weight of a single piece is about 17kg; implement JG/T 540-2017 "Flexible Stone-like Facing Materials for Buildings". The application images in this case total 6 pieces.

  • 1220×2930mm Panel specifications
  • 2.5–3.5mm thickness
  • Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
  • Approx. 1,260 ㎡ Wall area (◆budget estimate)
  • 6 pieces Application image
  • JG/T 540-2017 Implementation standards

Project file

Project item Content
Project typeHotel guest rooms
Application locationHeadboard background wall, main wall / side wall, back of wall adjacent to bathroom, corridor / entryway
Materials usedCherry wood grain flexible stone (Wood grain series)
Material specifications1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationPengzhou City, Sichuan Province
Wall areaApprox. 1,260㎡ (◆Estimate)
Actual photo record6 pieces (on-site shooting)

Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.

1. Customer industry usage scenario: the real wall requirements of hotel guest rooms

  1. The same layout is repeated N times; batch consistency is key The wall area per guest room is not large, but the same room type must be repeated dozens or even hundreds of times. The same wall in the same layout must use the same batch; otherwise adjacent rooms will show a visible color difference.
  2. The headboard background is the visual focus The headboard background wall bears the visual contact for the longest guest stay time and usually comes with recessed light strips; the material surface needs to be matte, with even texture, and capable of having holes cut for switches and reading lights.
  3. Dense openings for sockets and switches A standard guest room wall often has 6–10 openings (sockets, switches, lighting controls, network ports). The positions of the openings must be fixed during the layout stage and cannot be decided on site at the last minute.
  4. High cleaning frequency but low intensity Guest room walls are mainly affected by floating dust and fingerprints; the material surface is dense and can be wiped with a neutral cleaner.
  5. Moisture-proofing is key for bathroom partition walls The back of walls adjacent to bathrooms is prone to moisture; the material itself not absorbing water and being resistant to mold is a plus.
  6. The schedule scales linearly with the number of rooms With so many guest rooms, the efficiency of construction organization directly determines the total schedule; lightweight materials, single-person handling and fast installation are important.

II. Material comparison: why cherry wood grain flexible stone

2.1 Why choose the cherry wood grain flexible stone

The characteristics of cherry wood are warm reddish base color, fine texture, soft and unobtrusive annual ring lines. This feature is very important in hotel guest rooms: the guest room is the place where guests stay the longest, and the texture is too jarring (such as dark walnut or strong contrast texture) will cause fatigue after a long time looking at it; the visual weight of cherry wood grain is lighter than walnut by one level, and it has more warmth than light-colored white oak.

The usage in this project is heavier than conventional guest rooms: washbasin backdrop, bathtub area curved wall, walk-in closet, minibar partition, desk arched backdrop, lounge corner—almost every functional surface uses the same wood grain. This "continuous laying" approach places the highest requirements on batch consistency and edge finishing precision.

The wood-grain series offers cherry wood, honey brown, light walnut and other colors, with the rest customizable; the visual tone of this case is based on cherry wood warm brown as the base tone.

2.2 Material performance parameters

Project Parameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant;The specific grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions.
Bonding methodFull-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner.
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'

Specifications and packaging parameters

Specifications (mm) Thickness (mm) Approx. weight per panel (kg) Wooden crate packaging (pieces/crate) Area per box (㎡)
1220×29302.5–3.51770Approx. 250.2

The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.

3. Configuration plan

3.1 Allocate materials by spatial function

Space / Location Suggested materials Specifications Key focus
Headboard background wallFlexible stone (key surfaces)1220×2930mmLight strip slotting, socket openings
Main wall / side wallFlexible stone (same color family)Same as aboveColor difference control for the entire room
Back side of bathroom adjacent wallFlexible StoneSame as aboveMoisture-proof, no mildew
Corridor / entrywaySame as aboveSame as aboveImpact and abrasion resistance, edge finishing

3.2 Quantity and project schedule estimate

Dosage formula (★engineering experience basis):

Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up)
Item Calculation Result
Wall area of this project—Approx. 1,260㎡
Wastage rate★Value by spatial complexity10%
Material preparation area1,260 × 1.10Approx. 1,386㎡
Number of wooden crates1,386 ÷ 250.2 → Round up6 boxes

Construction period estimate (◆ estimate):

Stage Schedule
Substrate treatment (knock out hollow areas + leveling + drying)Substrate treatment usually accounts for about 1/3 of the total construction period
Layout setting-out★The denser the holes, the greater the layout workload
Adhesive mounting on wall★2 people in a group can complete 60-100㎡ per day; 1,260㎡ ÷ 80㎡/day ≈ 15 days
Finishing · Cleaning · Acceptance★Project experience
Total (budget estimate)Approx. 24 days(range 18–30 days)

Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.

A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.

3.3 Material Configuration

Stage Materials Function Basis
BondingSpecial adhesive,Full adhesion methodEnsure the finish and substrate are fully bondedProduct technical requirements; weather-resistant adhesive for outdoor use
SubstrateLeveling materials (selected according to substrate condition)Provide a flat, dry substrate free of hollowingSubstrate flatness directly affects appearance
Close upEdge trim / metal trimTreat internal and external corners, door frames, and wall base closures★Engineering Experience Practices
CuttingUtility knife / special cutting toolOn-site cutting according to the layout drawingOn-site secondary cutting is standard practice

IV. Construction process and acceptance control points

Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.

Step 1 · Base treatment

Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.

★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.

Step 2 · Measurement and layout

It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.

Step 3 · Cutting

Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.

Step 4 · Adhesive application and wall installation (full adhesion method)

RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.

Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.

Step 5 · Joints and edge finishing

  • Tight-joint: The seam lines are the finest, suitable for regular walls;
  • Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
  • Metal trim: Used for closing edges and emphasizing lines.

Step 6 · Cleaning and self-inspection

Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.

Step 7 · Delivery acceptance

Control points Standard value or practice Basis
Substrate dryness / hollowingdry, free of floating dust, no hollowing; if not compliant, repair first★Engineering Experience Practices
Substrate flatnessLeveling in place, repair deficiencies first★Engineering Experience Practices
Bonding methodFull bonding method, adhesive selected according to product instructionsProduct technical requirements
Material execution standardJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'Product execution standard
Internal and external corners and closuresEdge trim / metal trim closure, trim straight and true★Engineering Experience Practices
Cutouts and panelsThe cutout position is coaxial with the panel, and the edges are not chipped★Engineering Experience Practices
Color difference controlUse the same batch of material for the same wall surface in the same space★Engineering Experience Practices
Joint straightnessAlign joint lines within the same space, with no obvious misalignment visually★Engineering Experience Practices
Environmental protection indicatorsNo added formaldehyde, no asbestosProduct information (subject to the test report for the model)

V. Image display and application description

Total application photos of this project 6 pieces; all photographed on site at the project, covering washbasin background, bathtub area curved wall, walk-in closet / luggage area, guest room lounge corner, guest room partition / minibar, desk area and other areas.

Rest corner, vertical wood-grain curved wall, leather chair, and side table
Figure 1 · Seating corner, vertical wood-grain curved wall, leather chair and side table
Washbasin area, horizontal wood-grain background wall and round illuminated mirror
Figure 2 · Wash area, horizontal wood-grain feature wall and round illuminated mirror
Bathtub area, vertical wood-grain curved wall and white bathtub
Figure 3 · Bathtub area, vertical wood-grain curved wall and white bathtub
Cloakroom, vertical wood-grain wall with coat rack and bench
Figure 4 · Coat area, vertical wood-grain wall with coat rack and bench
Guest room minibar, vertical wood-grain partition wall and coffee equipment
Figure 5 · Guest room minibar, vertical wood-grain partition wall and coffee equipment
Work area, wood-grain arched lighting backdrop with desk
Figure 6 · Workspace, wood-grain arched lighting backdrop and desk

VI. Communication and confirmation process

For the wall works of hotel guest room projects, communication mainly centers on three things: whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.

Communication materials display; the correspondence with this case is pending verification and shall not serve as a basis for customer acceptance
Figure 7 · Communication materials display; its correspondence with this case is pending verification and is not to be used as a basis for client acceptance

Owner: Ours is a hotel guest room, and we want the wall to have the texture a hotel guest room should have. What do you suggest?

IGOODS: It is recommended to first clarify three things: gloss level (matte, not high-gloss), texture strength (weak texture is more enduring), and whether curved shapes are required. For materials in the wood grain series such as cherry wood grain flexible stone, the warm brown of cherry wood performs relatively stably and can be adapted.

Owner: How should cutouts and panel joints be handled?

IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.

Owner: What should be noted about the base layer?

IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.

Owner: Will it be easy to clean later?

IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.

Owner: To what extent is it dirt-resistant and scratch-resistant?

IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.

What was confirmed in this communication?

  • Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
  • Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
  • Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
  • Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
  • Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.

Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.

Seven, usage effects and daily maintenance

7.1 What is the perception of space?

After the cherry wood grain is laid out, the most obvious impression in the guest room is the temperature has risen but it does not look old. The biggest problem with wood in hotels is that it looks aged as the years of use increase, whereas flexible stone wood grain does not have the problems of fading, cracking, or insect damage; it can simply be wiped clean, and after several years it still looks the same as now.

Another effect is on curved surfaces: the curved wall in the bathtub area, the arched backdrop in the desk area, the curved partition of the minibar—the wood grain runs continuously across these curved surfaces, not pieced together one by one. To achieve the same effect with wood veneer, curved veneer or special-shaped processing would be required, with much higher cost and lead time.

7.2 Daily maintenance

Scenario Treatment method
Daily floating dustdry cloth or feather duster
Water stains / beverage stainsWipe with clean water or neutral detergent
Oily stainsNeutral cleaner,Avoid strong solvents
Minor scratchesJudged by texture type; textured surfaces themselves are relatively tolerant of minor marks
Prohibited practicesStrong acid and strong alkali solvents, steel wool, grinding machines

Maintenance-related characteristics of the material itself (from product documentation):

  • Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
  • Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
  • Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
  • Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.

7.3 On-site Recheck After Delivery

Review items Inspection content Basis for determination
Joints and closuresWhether joint lines are straight, whether lines are aligned, whether corners are properly executedno obvious misalignment by visual inspection
Cutouts and panelsWhether the switch and socket are coaxial with the cutout and whether the edges are chippedPanel coverage with no exposed edges
Whole wallWhether there is hollowing or obvious color differenceHollowing rate 0; no visible color difference on the same wall

Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.

7.4 Cost Reference

Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.

Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:

Item Calculation Result
Lower limit of material amount1,260 × 25Approx. RMB 31,000
Upper limit of material amount1,260 × 300Approx. RMB 380,000

Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.

VIII. Common questions (FAQ)

If wood-grain texture is used on a wall adjacent to a bathroom, will it be affected by moisture?

The material itself does not absorb water and is resistant to mold, and can be used in humid environments; however, a waterproof layer is still required on the back side of the bathroom adjacent wall, the advantage of the material is that even if it gets damp, it will not bulge or mold like wood veneer. During construction, it is recommended to first confirm that the wall to be covered has been waterproofed and is thoroughly dry.

How is the curved wall in the bathtub area made?

First build the substrate into a curve as designed (wood-based panel or gypsum board shaping), and the material follows the substrate curve. Flexible stone can be bent into an arc within a certain radius, the specific radius shall be subject to the selected model and substrate conditions; for large-radius shapes, it is recommended to confirm with a mock-up first, then cut in batches.

What is the difference between cherry wood grain and real wood veneer?

In appearance they are all wood grain; the difference lies in service life and maintenance: real wood veneer fades under light, easily bulges when damp, and requires regular surface maintenance; flexible stone wood grain does not fade, does not mold, can be wiped clean, and can wrap curved surfaces in a single sheet. The trade-off is a harder feel and none of the warm tactile quality of real wood.

With so many guest rooms, how do you ensure batch consistency?

The same wall in the same layout must use the same batch; otherwise adjacent rooms will show a visible color difference. For large-area projects, it is recommended to prepare sufficient material in one go and mix the batches at the production scheduling stage, rather than ordering in batches only when the site needs material.

IX. Project File and Contact Information

Project file Content
Project typeHotel guest rooms
Materials usedCherry wood grain flexible stone (wood grain series)
Material specifications1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg
Packaging70 Sheets/Case | Approximately 250.2㎡/Case
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationPengzhou City, Sichuan Province
Wall areaApprox. 1,260㎡ (◆Estimate)
Actual photo record6 pieces

Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door

  • Phone / WeChat / WhatsApp: 19136341389
  • Email: 19136341389@163.com
  • Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
  • Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response

Content and scope statement: This page records the wall material selection and construction process for this hotel guest room. The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆Estimate" are estimated values for area, schedule, and cost calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.

Find the appropriate wall expression for your project.

Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.

Consulting project material selection ↗
Contact phone number Product Catalog Free Sample
WeChat ID copied