Old South Red Wood-Grain Board Flexible Stone
Old South Red Wood-Grain Board is a flexible stone in the Wood-Grain Series. Its surface features an old South Red tone and wood-grain board texture. It is lightweight, flexible, and bendable, suitable for wall surfaces in hotels, restaurants, commercial stores, exhibition halls, and other commercial spaces. This page provides specifications and packaging parameters, materials and performance, construction methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and bulk engineering quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Old South Red Wood-Grain Board Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series:Wood grain series
- Craftsmanship:Wood-grain transfer printing
- Main tone: South Red tone, warm within the red
- Texture features:Natural wood-grain texture, with clear annual rings and wood-grain direction
- Recommended scenarios:Hotels, homestays, office spaces, commercial spaces
- Main applications: Building wall
In IGOODS's wood grain series, Old South Red Wood-Grain Board Flexible Stone is a style in the "temperature and focal point" direction. It takes a natural and warm route, suitable for spaces that wish to express wood vocabulary through stone craftsmanship; when applied to actual wall surfaces, its color tension is clear, making it suitable as a local focal surface rather than large-area application.
As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. When purchasing, searching by the term "flexible stone" is least likely to miss items, and soft stone and flexible imitation stone finish are also common synonymous names.
Actual photographed texture characteristics of wood-grain boards
In the real photo, the surface of Old South Red Wood Grain Board Flexible Stone appears in a South Red tone, warm within the red. Its texture is characterized by "natural wood grain texture, with clear growth rings and wood grain direction." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.
Light has a fairly obvious effect on this color: under natural side light, the southern red portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1180×3000 | 2.5-3.5 | 17 | 70 | 244.45 | 1280×3100×500 | 1260 |
Optional colors: White, wood grain (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The material uses a composite of natural mineral raw materials and a polymer flexible substrate, an inorganic ecological material with zero formaldehyde, meeting the environmental requirements of residential decoration, commercial fit-outs, and outdoor projects. Light weight, thin panel, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also has flame retardant, moisture-proof, and stain-resistant performance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges of flexible stone as a category of material. The acceptance basis for Old South Red Wood-Grain Board Flexible Stone in specific projects shall be subject to the valid test report of the selected model, the provisions of the supply contract, and the relevant standards of the project location.
Key installation and construction points
This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.
Substrate treatment
Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.
Measurement and layout
Lay out according to the actual wall dimensions, giving priority to placing whole panels in the positions where the eye lingers most, and leaving cut edges in internal corners or closing details. It is recommended to use the same batch of material for the same wall and to mix and lay out once before installation to reduce concentrated color tones.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces is Old South Red Wood-Grain Board Flexible Stone suitable for?
Judging from the types of projects already completed, this color mainly appears in the following directions.
Hotel lobbies and corridors
Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.
Homestays and resort spaces
Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.
Office front desk and meeting area
The front desk and meeting room exterior walls in office spaces need materials that convey a certain professionalism and sense of order while not being overly eye-catching; this type of neutral-oriented stone texture is relatively suitable.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
What product features does Old South Red Wood-Grain Board Flexible Stone have?
- Lightweight dead weight:Compared with natural stone slabs of the same size, the weight of this type of material is an order of magnitude lower, so no separate load-bearing reinforcement is required for the finish.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Low-maintenance:The finish does not require waxing or special maintenance; daily cleaning with water or a neutral cleaner is sufficient, and color and texture change little after long-term use.
- Project coordination:The design side can support sampling and material selection, and the engineering side can support layout and node treatment, with corresponding people following up from material selection to implementation.
- High degree of form freedom: Bendable, cuttable and capable of full-panel wrapping; curved walls, columns and irregular entrance headers no longer need to be split into multiple small pieces for assembly.
Project selection and procurement points for Old South Red Wood-Grain Board Flexible Stone
Foreign trade export companies, cross-border building materials traders, and overseas engineering buyers focus on export standards, compliance certifications, bulk supply capability, and degree of customization. As a source factory, IGOODS supports bulk supply, OEM customization, specification customization, and packaging customization, and can serve building exterior wall and interior decoration project needs in different countries and regions.
Supports full-container shipments and mixed-batch customization, and can provide complete customs declaration documents, product test reports and qualification documents. It has long undertaken overseas exterior wall decoration, building renovation and landscape orders, reducing the communication costs of foreign trade companies in material selection, supply and compliance.
From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.
Flexible stone for exterior wall, outdoor flexible stone panel, custom flexible stone veneer are several high-matching expressions in overseas inquiries.
Old South Red Wood-Grain Board Flexible Stone FAQ
What is the construction process for Old South Red Wood-Grain Board Flexible Stone?
The conventional process is substrate inspection, on-site measurement and layout, material cutting, pasting, compaction and position adjustment, and edge and corner finishing. The specific plan needs to be determined based on substrate type, wall dimensions and use environment.
Is there a fire rating?
The product has flame-retardant performance; the specific combustion performance rating is subject to the valid test report for the selected model. For public building projects with clear fire protection requirements, it is recommended to directly request the test documents for the corresponding batch at the selection stage.
What is the typical lead time?
Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.
How to confirm whether to choose this one or another color pattern in the same series?
It is advisable to also request physical samples of 2–3 candidate color options, compare them under the lighting conditions of the actual space, and then make a decision in combination with the layout effect over a large area. Looking only at a small sample can easily overlook the rhythm of the overall installed surface.
What common specifications does Old South Red Wood-Grain Board Flexible Stone have?
The specific available specifications of Old South Red Wood-Grain Board Flexible Stone are shown in the "Specifications and Packaging Parameters" table above. Conventional flexible stone stock covers multiple sizes and supports customized large panels, small panels, and special-shaped sizes. Actual supply specifications need to be confirmed based on the selected thickness and packaging method.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. Our factory is a source manufacturer and can provide physical samples, custom fabrication to drawings, and preferential bulk pricing for projects; foreign trade orders come with customs declaration documents and test reports, with nationwide shipping.
Old South Red Wood-Grain Board Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.