Light gray solid-color wood-grain board flexible stone
Light gray solid-color wood-grain board flexible stone is a solid-color flexible stone from IGOODS in the wood-grain series. The main color tone is light gray, soft and elegant, with natural wood-grain texture, clear growth rings and grain direction. It is thin, lightweight, flexible, and bendable, suitable for hotels, homestays, office spaces, and commercial spaces. This page provides specifications and packaging parameters, material and performance details, installation methods, and acceptance criteria, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:Light gray solid-color wood-grain board flexible stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series:Wood grain series
- Craftsmanship:Wood-grain transfer printing
- Main tone: Light gray tone, soft and elegant
- Texture features:Natural wood-grain texture, with clear annual rings and wood-grain direction
- Recommended scenarios:Hotels, homestays, office spaces, commercial spaces
- Main applications: Building wall
Light gray solid-color wood-grain board flexible stonePart of the IGOODS wood grain series product line, and the one in this line leaning toward "background and order." It takes a natural and warm route, suitable for spaces that wish to express wood vocabulary through stone craftsmanship. It has a low presence as a background surface, making it easy to let the visual focus go to furnishings and lighting, so it is more readily prioritized for walls that need to control structural load.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. In inquiries and searches, this type of product is also often called soft stone panels, flexible stone-look veneer, bendable stone, or ultra-thin flexible exterior wall stone.
Actual photographed texture characteristics of wood-grain boards
As seen in the actual product photos, this Light Gray Solid Color Wood-Grain Panel Flexible Stone has an overall light gray tone, soft and elegant. Its texture can be summarized as "natural wood-grain texture with clear growth rings and grain direction." The grain direction is continuous with natural transitions and no abrupt splicing breaks; once installed on a wall, it maintains a consistent appearance under natural or artificial light.
Under different lighting conditions, the appearance of the light gray solid-color wood-grain flexible stone panel varies subtly—diffused light gives a stronger overall sense of unity, while directional light enhances the relief of the texture. Designers can use this to control the visual weight of the wall surface.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1180×3000 | 2.5-3.5 | 17 | 70 | 244.45 | 1280×3100×500 | 1260 |
Optional colors: White, wood grain (other colors customizable)
Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.
Customization notes:In addition to standard specifications, custom-shaped dimensions and extra-long panels can be made according to drawings; texture direction and color are subject to the design draft, and thickness can also be adjusted within the standard range.
Material and performance parameters
At the level of material and performance, several points about this type of material need to be clarified first. In terms of material, it uses natural mineral raw materials compounded with a polymer flexible substrate, is an inorganic ecological material, zero formaldehyde, and meets the environmental requirements of home decoration, commercial decoration, and outdoor projects. In terms of physical performance, ultra-thin and lightweight and bendability are the two basic characteristics, from which a series of construction advantages derive, such as resistance to cracking, resistance to deformation, and easy adhesion to irregular substrates.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For the specific Light Gray Solid Color Wood-Grain Board flexible stone product, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.
Key installation and construction points
Construction does not rely on a framing system; after the substrate is leveled, it can be directly adhered. Mature methods are available for flat and curved surfaces, columns and irregular curtain walls, old walls, and insulated walls.
Substrate treatment
Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.
Measurement and layout
At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Both dry-bonding and wet-bonding processes are compatible. Use a dedicated adhesive for flexible stone, apply with the full-surface bonding method, spread evenly with a notched trowel, and press firmly after installation to ensure there are no obvious voids between the back of the board and the substrate. For outdoor facade construction, a weather-resistant adhesive suitable for the external environment must be used.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
What commercial spaces is light gray solid-color wood-grain board flexible stone suitable for?
The application of this color in actual projects is relatively concentrated and can generally be grouped into the following types of spaces.
Hotel lobbies and corridors
Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.
Homestays and resort spaces
Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.
Office space
Office buildings and co-working scenarios care more about long-term appearance and maintenance costs. This type of material has a dense surface that does not easily retain dirt; daily cleaning is mainly wiping with a damp cloth, making it suitable for frequently used public interfaces.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
What product features does light gray solid-color wood-grain board flexible stone have?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Batch supply: Supports full-container shipments and mixed-batch customization, and can provide customs declaration documents, product test reports and qualification documents, facilitating foreign trade and engineering centralized procurement.
- Low-maintenance:The surface does not easily retain marks, and high-frequency use locations in public spaces do not require additional protective measures.
- Project coordination:The design side can support sampling and material selection, and the engineering side can support layout and node treatment, with corresponding people following up from material selection to implementation.
Project selection and procurement key points for light gray solid-color wood-grain board flexible stone
The most common problem at the design material selection stage is: the stone texture in the rendering looks great, but after implementation it is distorted due to seams, color differences or shape limitations. The bendable and cuttable characteristics of flexible stone are precisely intended for locations such as curved walls, columns, irregular door headers and shaped curtain walls.
Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.
Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.
At the design stage, designers usually compare several approaches at the same time—stone-look flexible panels, ultra-thin flexible stone and bendable exterior wall stone—and then make trade-offs based on the difficulty of the shape.
Frequently Asked Questions about Light Gray Solid-Color Wood-Grain Board Flexible Stone
How thick is light gray solid-color wood-grain board flexible stone usually?
The common thickness of flexible stone ranges from 2.3–9mm, with considerable variation across different patterns and specifications. For the thickness range of Light Gray solid-color wood-grain board flexible stone, refer to the specification table above; the specific thickness is subject to order confirmation.
Will the color of samples and bulk supply be consistent?
Flexible stone is made from natural mineral raw materials. Color tone is relatively stable within the same batch, and slight differences may exist between different batches. It is recommended to use materials from the same batch within the same project and to arrange mixed layout during the layout stage.
Is construction of irregular shapes troublesome?
Compared with hard stone, the advantage of flexible stone in irregular positions lies in its ability to wrap the entire surface in one piece, reducing assembly seams. However, the more complex the shape, the higher the requirements for layout and finishing, and it is recommended that experienced installation crews carry out the work.
Can light gray solid-color wood-grain board flexible stone be used outdoors?
Yes. Flexible stone has UV resistance, high and low temperature resistance and weathering resistance, and is suitable for exterior facades. For long-term outdoor use, it is recommended to confirm the selection in conjunction with the project location's climate conditions and orientation.
What is the difference between light gray solid-color wood-grain board flexible stone and natural stone?
The two belong to different types of materials and should not be simply understood as substitutes for each other. The value of natural stone lies in its unreproducible natural attributes; flexible stone emphasizes being lightweight and thin, construction organization, and form adaptability. Material selection should comprehensively consider the design effect, substrate conditions, material weight, transport method, project budget, and usage environment.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
The application scope covers indoor and outdoor architectural decoration, full-package commercial fit-out, hotel and shop renovation, office building renovation, residential building facades, municipal exterior wall projects, campus and hospital renovation, old residential community renovation and cultural tourism landscape construction. Direct supply from the source factory, with free sample dispatch, customization according to drawings, batch supply for projects, test reports provided and nationwide shipping, with after-sales technical support.
Light gray solid-color wood-grain board flexible stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.