Natural wood color sawn wood panel flexible stone
Natural wood color sawn wood panel is a flexible stone in the wood grain series. Its surface presents a natural wood tone and sawn wood texture. It is lightweight, thin, flexible, and bendable, suitable for walls in commercial spaces such as hotels, restaurants, commercial stores, and showrooms. This page provides specifications and packaging parameters, materials and performance, construction methods and acceptance key points, with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Natural Wood Color Sawn Wood Panel Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series:Wood grain series
- Craftsmanship:Wood-grain transfer printing
- Main tone:Natural wood tone, natural and rustic
- Texture features:Sawn wood grain texture, with straight wood grain and clear saw marks
- Recommended scenarios:Hotels, homestays, office spaces, commercial spaces
- Main applications: Building wall
Natural Wood Color Sawn Wood Panel Flexible Stone is a flexible stone in the IGOODS wood grain series. This product line focuses on wood grain transfer printing and sawn wood grain as its main design direction. Among them, Natural Wood Color Sawn Wood Panel Flexible Stone emphasizes the expression of "nature and warmth"—a warmer wood texture expression, suitable for spaces that need warmth but do not want the maintenance cost of real wood.
As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. Names vary by region: soft stone, flexible stone, flexible imitation stone panel, and bendable stone basically refer to the same type of product.
Actual-shot texture features of Sawn Wood Board
Observing the real photo details of Natural Wood Color Sawn Wood Panel Flexible Stone, it can be seen that it has an overall natural wood tone, natural and rustic. As for the texture, it belongs to the category of "sawn wood grain texture, with straight wood grain and clear saw marks." The texture density is evenly distributed on the same piece of material, and the texture performance at the edges and corners is basically consistent with the central area.
Under different lighting conditions, the appearance of Natural Wood Color Sawn Wood Panel Flexible Stone will have slight differences—under diffused light the overall effect is stronger, while under directional light the undulations of the texture are enhanced. Designers can use this to control the visual weight of the wall.
Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1100×2980 | 3.5-6.5 | 25 | 50 | 163.9 | 1200×3080×450 | 1320 |
Optional colors:Natural wood color, black, hickory, new south red (other colors can be customized)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, with no wooden substrate used, so there is no hidden risk of formaldehyde release. Light weight, thin panel, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also has flame retardant, moisture-proof, and stain-resistant performance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For the specific Natural Wood Color Sawn Wood Panel Flexible Stone product, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.
Key installation and construction points
On the construction side, no keels or complex substrate preparation are required; panels can be installed once the wall is leveled, and both dry bonding and wet bonding are compatible. Flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls can all be handled accordingly.
Substrate treatment
Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.
Measurement and layout
Lay out according to the actual wall dimensions, giving priority to placing whole panels in the positions where the eye lingers most, and leaving cut edges in internal corners or closing details. It is recommended to use the same batch of material for the same wall and to mix and lay out once before installation to reduce concentrated color tones.
Cutting and hole drilling
Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.
Edge finishing and acceptance
For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.
Which commercial spaces is Natural Wood Color Sawn Wood Panel Flexible Stone suitable for?
Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.
Hotel guest rooms and elevator lobbies
Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.
Homestay guest rooms and public areas
Vacation-oriented spaces emphasize a sense of relaxation and handmade traces, and the randomness of this type of texture fits the "unforced" spatial character perfectly.
Office front desk and meeting area
The front desk and meeting room exterior walls in office spaces need materials that convey a certain professionalism and sense of order while not being overly eye-catching; this type of neutral-oriented stone texture is relatively suitable.
Commercial storefronts and street blocks
Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.
What product features does Natural Wood Color Sawn Wood Panel Flexible Stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
- Convenient on-site cutting: Conventional thickness can be cut with a utility knife and a straightedge through multiple scoring passes; irregular shapes and openings are trimmed on site, with no need for prefabrication and secondary transport.
- Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.
- Batch supply:As a source factory, we can directly handle bulk engineering orders, support expedited production scheduling and on-site technical coordination, and deliver in batches in line with the project schedule.
Project selection and procurement points for Natural Wood Color Sawn Wood Panel Flexible Stone
For commercial decoration companies and full-package renovation companies, the priority in material selection is usually the construction period, labor and acceptance, rather than the material's own color pattern. Flexible stone directly corresponds to these three points: no keel is required for construction, no complex base preparation is needed, and it can be adhered after the wall is leveled, saving one structural process.
The material is flexible, crack-resistant, and impact-resistant, and can adapt to complex site environments. New installers can get up to speed quickly, which helps compress the schedule and labor costs. Fire resistance, moisture resistance, and weather resistance indicators also meet the requirements of routine project acceptance.
Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.
Lightweight and safe exterior wall stone, flexible decorative stone for indoor and outdoor universal use, a relatively high-frequency search direction in commercial renovation material selection.
Natural Wood Color Sawn Wood Panel Flexible Stone frequently asked questions
Can the specifications of Natural Wood Color Sawn Wood Panel Flexible Stone be customized?
Yes. In addition to conventional stock specifications, flexible stone supports customization of large panels and extra-long panels, and can also be grooved according to drawings and cut on site. Lead times and minimum order quantities for custom specifications need to be confirmed separately according to the specific dimensions.
Does a difference in thickness lead to different usage scenarios?
There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.
Can samples be sent first?
Yes. IGOODS provides physical samples for design material selection, texture confirmation and project material evaluation. Due to natural differences between batches, it is recommended to use samples from the same batch for final confirmation before large-area construction.
Is construction of irregular shapes troublesome?
Compared with hard stone, the advantage of flexible stone in irregular positions lies in its ability to wrap the entire surface in one piece, reducing assembly seams. However, the more complex the shape, the higher the requirements for layout and finishing, and it is recommended that experienced installation crews carry out the work.
About IGOODS
IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.
The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.
From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. From sampling to batch delivery, the factory handles matters directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, and after-sales is followed up by the technical team.
Natural wood color sawn wood panel flexible stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.