Hotel guest room 560㎡ linen-woven flexible stone wall construction case

IGOODS provided linen-woven soft stone as wall material for a hotel guest room project in Dazhou City, Sichuan Province, using the full-adhesion method for direct wall application without a furring base. The project's wall surface is estimated at approximately 560㎡, with material specifications of 1220×2930mm, thickness 2.5–3.5mm, and single-piece weight of approximately 17kg, conforming to JG/T 540-2017 "Flexible Stone-like Decorative Facing Materials for Buildings."

Published time:

IGOODS provided for a hotel guest room project in Dazhou City, Sichuan Province, Hotel guest rooms project provided by Linen weave flexible stone as a wall material, applied directly to the wall with the full-adhesion method, with no need for a keel substrate. The project wall budget is about 560㎡, material specifications 1220×2930mm, thickness 2.5–3.5mm, the weight of a single piece is about 17kg; implement JG/T 540-2017 "Flexible Stone-like Facing Materials for Buildings". The application images in this case total 8 pieces.

  • 1220×2930mm Panel specifications
  • 2.5–3.5mm thickness
  • Approx. 3.2 kg/㎡ Surface weight (converted at 17kg/piece)
  • Approx. 560 ㎡ Wall area (◆budget estimate)
  • 8 pieces Application image
  • JG/T 540-2017 Implementation standards

Project file

Project item Content
Project typeHotel guest rooms
Application locationHeadboard background wall, main wall / side wall, back of wall adjacent to bathroom, corridor / entryway
Materials usedLinen weave flexible stone (fabric weave and weave series)
Material specifications1220×2930mm, thickness 2.5–3.5mm, single piece about 17kg
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationDazhou City, Sichuan Province
Wall areaApprox. 560 ㎡ (◆ budget estimate)
Actual photo record8 pieces (on-site shooting)

Regarding the scope of this page: The material specifications, performance parameters, and applicable standards in this article all come from IGOODS product documentation and can be verified item by item. ★Project experience = Common industry practices and experience range, not as a reference for national standards data; ◆Estimate = Estimated value calculated based on the industry's common scale and the scale of this case, used to judge the scale,Not an actual measured bill; actual conditions are subject to project confirmation.

1. Customer industry usage scenario: the real wall requirements of hotel guest rooms

  1. The same layout is repeated N times; batch consistency is key The wall area per guest room is not large, but the same room type must be repeated dozens or even hundreds of times. The same wall in the same layout must use the same batch; otherwise adjacent rooms will show a visible color difference.
  2. The headboard background is the visual focus The headboard background wall bears the visual contact for the longest guest stay time and usually comes with recessed light strips; the material surface needs to be matte, with even texture, and capable of having holes cut for switches and reading lights.
  3. Dense openings for sockets and switches A standard guest room wall often has 6–10 openings (sockets, switches, lighting controls, network ports). The positions of the openings must be fixed during the layout stage and cannot be decided on site at the last minute.
  4. High cleaning frequency but low intensity Guest room walls are mainly affected by floating dust and fingerprints; the material surface is dense and can be wiped with a neutral cleaner.
  5. Moisture-proofing is key for bathroom partition walls The back of walls adjacent to bathrooms is prone to moisture; the material itself not absorbing water and being resistant to mold is a plus.
  6. The schedule scales linearly with the number of rooms With so many guest rooms, the efficiency of construction organization directly determines the total schedule; lightweight materials, single-person handling and fast installation are important.

II. Material comparison: why hemp-woven soft stone

Why choose hemp woven soft stone

Guest room walls do not need to be "eye-catching," but they do need timeless appearance. The woven texture of linen soft stone has detail up close and a uniform base color from a distance, which exactly meets the guest room's requirement as a "long-stay space"; Rice Yellow tone keeps the room at a stable warmth under both natural and artificial light.

The Cloth Texture and Weave Series offers Rice Yellow, Old South Red, Light Gray and other colors, with the rest customizable; the visual tone of this case is based on Beige Tone as the base tone.

2.2 Material performance parameters

Project Parameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant;The specific grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe panel has a certain flexibility and can be bent into an arc within a certain radius;The specific radius shall be subject to the model and substrate conditions.
Bonding methodFull-bed adhesion is recommended for installation; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, wipe with water or a neutral cleaner.
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'

Specifications and packaging parameters

Specifications (mm) Thickness (mm) Approx. weight per panel (kg) Wooden crate packaging (pieces/crate) Area per box (㎡)
1220×29302.5–3.51770Approx. 250.2

The specifications, weights and packaging in the table are reference values; actual values are subject to order confirmation; custom large panels, small panels and special-shaped sizes are supported.

3. Configuration plan

3.1 Allocate materials by spatial function

Space / Location Suggested materials Specifications Key focus
Headboard background wallFlexible Stone(key surface)1220×2930mmLight strip slotting, socket openings
Main wall / side wallFlexible stone (same color family)Same as aboveColor difference control for the entire room
Back side of bathroom adjacent wallFlexible StoneSame as aboveMoisture-proof, no mildew
Corridor / entrywaySame as aboveSame as aboveImpact and abrasion resistance, edge finishing

3.2 Quantity and project schedule estimate

Dosage formula (★engineering experience basis):

Material preparation area = measured net wall area × (1 + loss rate). Loss rate: regular walls 5%–8%; spaces with many corners/openings 10%–15%. Number of wooden crates = material preparation area ÷ 250.2㎡ (rounded up)
Item Calculation Result
Wall area of this project—Approx. 560 ㎡
Wastage rate★Value by spatial complexity10%
Material preparation area560 × 1.10Approx. 616 ㎡
Number of wooden crates616 ÷ 250.2 → Round up3 boxes

Construction period estimate (◆ estimate):

Stage Schedule
Substrate treatment (knock out hollow areas + leveling + drying)Substrate treatment usually accounts for about 1/3 of the total construction period
Layout setting-out★The denser the holes, the greater the layout workload
Adhesive mounting on wall★2 people can complete 60-100㎡ per day in a group; 560㎡ ÷ 80㎡/day ≈ 7 days
Finishing · Cleaning · Acceptance★Project experience
Total (budget estimate)Approx. 24 days(range 18–30 days)

Diameter specification: The table above is an estimate calculated by order of magnitude,Excludes time occupied by material transport and coordination with the client: ; the actual schedule is subject to the construction schedule confirmed after on-site survey.

A practical reminder: Flexible stone is made from natural mineral raw materials,Slight color tone differences may exist between different batches, this is a characteristic of the material itself. For large-area projects, it is recommendedStock the full quantity at one time and mix the layout: ; always use the same batch for the same wall in the same space.

3.3 Material Configuration

Stage Materials Function Basis
BondingSpecial adhesive,Full adhesion methodEnsure the finish and substrate are fully bondedProduct technical requirements; weather-resistant adhesive for outdoor use
SubstrateLeveling materials (selected according to substrate condition)Provide a flat, dry substrate free of hollowingSubstrate flatness directly affects appearance
Close upEdge trim / metal trimTreat internal and external corners, door frames, and wall base closures★Engineering Experience Practices
CuttingUtility knife / special cutting toolOn-site cutting according to the layout drawingOn-site secondary cutting is standard practice

IV. Construction process and acceptance control points

Flexible stone belongs toRelatively relaxed requirements for construction conditionsa type of material: no keel or complex substrate is required,Once leveling is complete, it can go on the wall—dry adhesion or wet fixing both work. But this does not mean that the process can be skipped.

Step 1 · Base treatment

Adhesive substrates includeCement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, insulated wall surfacesRequirements:dry, free of floating dust, no hollowing: ; if flatness is insufficient, level first; if moisture content is too high, seal the base first.

★Engineering Experience: The most common problems in existing-building renovation projects are hollowing of the old putty layer, local dampness, and non-straight internal and external corners.Hollowing must be removed; otherwise the finish will fall off along with it.

Step 2 · Measurement and layout

It is advisable to put the layout drawing on paper before starting workMark door and window openings, switches and sockets, and internal and external corner positions, and calculate the space occupied by trim strips in advance.Joint lines on different walls within the same space should be aligned as much as possible, the overall visual impression differs greatly.

Step 3 · Cutting

Cut according to the layout drawing; secondary cutting on site is a conventional practice. Flexible stone panels are thin and flexible, making cutting less difficult than ceramic tile or stone, butAvoid repeatedly bending the same area.

Step 4 · Adhesive application and wall installation (full adhesion method)

RecommendedFull adhesion method: Adhesive should be selected according to the product instructions,Full coatingRather than spot application; after installation on the wall, press firmly and release air to ensure there is no cavity between the finish and the substrate.

Regarding curved arcs: Flexible stone can bend within a certain radius,The specific radius shall be subject to the model and substrate conditions.: ; large-radius curves require a mock-up for confirmation first.

Step 5 · Joints and edge finishing

  • Tight-joint: The seam lines are the finest, suitable for regular walls;
  • Leave a joint + edge trim: High fault tolerance, suitable for spaces with many corners and cutouts;
  • Metal trim: Used for closing edges and emphasizing lines.

Step 6 · Cleaning and self-inspection

Check each wall: hollowing, color difference, straightness of joint lines, squareness of openings, and finishing in place.

Step 7 · Delivery acceptance

Control points Standard value or practice Basis
Substrate dryness / hollowingdry, free of floating dust, no hollowing; if not compliant, repair first★Engineering Experience Practices
Substrate flatnessLeveling in place, repair deficiencies first★Engineering Experience Practices
Bonding methodFull bonding method, adhesive selected according to product instructionsProduct technical requirements
Material execution standardJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'Product execution standard
Internal and external corners and closuresEdge trim / metal trim closure, trim straight and true★Engineering Experience Practices
Cutouts and panelsThe cutout position is coaxial with the panel, and the edges are not chipped★Engineering Experience Practices
Color difference controlUse the same batch of material for the same wall surface in the same space★Engineering Experience Practices
Joint straightnessAlign joint lines within the same space, with no obvious misalignment visually★Engineering Experience Practices
Environmental protection indicatorsNo added formaldehyde, no asbestosProduct information (subject to the test report for the model)

V. Image display and application description

Total application photos of this project 8 pieces; all photographed on site at the project, covering guest room panorama, desk area (I), desk area (II), minibar shelving, single-chair lounge corner, dressing and bar area, round-mirror dressing table, walk-in closet and other areas.

Rest corner, beige woven-textured curved wall, niche, and armchair
Figure 1 · Seating corner, beige woven-texture curved wall, niche and armchair
Close-up of the work area, beige woven-texture arched wall with wood-colored tabletop
Figure 2 · Work area close-up, beige woven-texture arched wall and wood-colored desktop
Another view of the work area, beige woven-texture arched wall with contour lighting
Fig. 3 · Workspace from another perspective, beige woven-texture arched wall and outline lighting
Minibar with beige woven-texture wall and wood-colored shelving cabinet
Figure 4 · Minibar, beige woven-texture wall and wood-colored shelving cabinet
Single-person rest corner, beige woven-texture wall and display niche
Figure 5 · Single-person lounge corner, beige woven-texture wall and display niche
Work table, beige woven-texture backdrop wall with small round mirror
Figure 6 · Vanity table, beige woven-texture backdrop wall and small round mirror
Dressing area, beige woven-texture wall and round hanging mirror
Figure 7 · Vanity area, beige woven-texture wall and round hanging mirror
Cloakroom, beige woven-texture wall and wood-colored open cabinets
Figure 8 · Walk-in closet, beige woven-texture wall and wood-colored open shelving

VI. Communication and confirmation process

For the wall works of hotel guest room projects, communication mainly centers on three things: whether the material selection matches the spatial character, how the openings and layout are determined, and whether the substrate conditions are met. The following are the key points of the communication process.

Owner: Ours is a hotel guest room, and we want the wall to have the texture a hotel guest room should have. What do you suggest?

IGOODS: It is advisable to clarify three things first: gloss level (matte rather than high-gloss), texture intensity (subtle textures are more enduring), and whether curved shapes are needed. For materials such as linen-woven flexible stone in the fabric texture and woven series, the performance of the beige tone is relatively stable and can be adapted.

Owner: How should cutouts and panel joints be handled?

IGOODS: This must be atLayout stageSolve it. We will first map the positions of door and window openings, switches and sockets, and internal and external corners onto the layout drawing, then determine the seam line direction. Deciding on site will force the seam lines to be disrupted by openings, which is the most common appearance problem.

Owner: What should be noted about the base layer?

IGOODS: the base layer mustdry, free of floating dust, no hollowingHollowing must first be removed and re-leveled—the finish is applied on top, and if the substrate is hollow, the finish will fall off with it; walls with excessively high moisture content must be primed and sealed first.

Owner: Will it be easy to clean later?

IGOODS: The surface is dense; for daily cleaning, just wipe with water or a neutral cleaner. Note: do not use strong solvents, and no sanding is needed.

Owner: To what extent is it dirt-resistant and scratch-resistant?

IGOODS: The specific wear resistance and stain resistance indicators shall be subject to the valid test report of the selected model. The material itself is zero formaldehyde, asbestos-free and flame retardant; these can be verified in the product documentation.

What was confirmed in this communication?

  • Selection criteria: Determine the direction of matte, textured, bendable materials rather than high-gloss surface materials;
  • Layout prerequisites: Doors and windows, openings, and internal and external corners must be positioned during the layout stage, not decided on site at the last minute;
  • Substrate prerequisites: Hollowing must be removed and leveling redone, and wall installation is allowed only after moisture content meets the standard;
  • Batch control: Use the same batch of material for the same wall surface in the same space to avoid color differences;
  • Acceptance Basis: Performance indicators are subject to the valid test report for the selected model; no verbal commitments are made.

Record notes: This section is a summary of key points from the communication process, used to explain how the plan was finalized. The text contains no performance commitments or price commitments;The avatar and nickname are illustrative graphics and do not represent the customer's actual image.

Seven, usage effects and daily maintenance

7.1 What is the perception of space?

Guest room walls change from "a flat interface" to "an interface with warmth". The hemp weave texture shows fine woven undulations under bedside lamps and light strips; combined with wooden shelving and marble countertops, the material contrast is much richer than a single paint finish; and because consecutive rooms of the same layout use a uniform batch, color differences are controlled within a range indistinguishable to the naked eye.

7.2 Daily maintenance

Scenario Treatment method
Daily floating dustdry cloth or feather duster
Water stains / beverage stainsWipe with clean water or neutral detergent
Oily stainsNeutral cleaner,Avoid strong solvents
Minor scratchesJudged by texture type; textured surfaces themselves are relatively tolerant of minor marks
Prohibited practicesStrong acid and strong alkali solvents, steel wool, grinding machines

Maintenance-related characteristics of the material itself (from product documentation):

  • Waterproof and moisture-proof: The material does not absorb water, so walls are less prone to dampness and mold after construction;
  • Mildew resistance: Suitable for humid environments and underground spaces; routine maintenance is mainly wiping;
  • Anti-crackingThe flexible substrate can absorb minor substrate deformation, making the finish less prone to fine cracks;
  • Stain resistance and cleaning: The surface is dense and not prone to staining; daily wiping with water or neutral cleaner is sufficient.

7.3 On-site Recheck After Delivery

Review items Inspection content Basis for determination
Joints and closuresWhether joint lines are straight, whether lines are aligned, whether corners are properly executedno obvious misalignment by visual inspection
Cutouts and panelsWhether the switch and socket are coaxial with the cutout and whether the edges are chippedPanel coverage with no exposed edges
Whole wallWhether there is hollowing or obvious color differenceHollowing rate 0; no visible color difference on the same wall

Diameter specification: The above are the conventional characteristics of the material itself and the review method.For engineering indicators in specific projects (wear cycles, stain resistance grade, etc.), please refer to the valid test report of the selected model and project technical confirmation.

7.4 Cost Reference

Flexible stone'sPrice range is 25–300 yuan/㎡, the span is relatively large, depending on specifications, thickness, texture process, order quantity, and delivery time.

Cost rough estimate for this project (◆ rough estimate): Apply at 25–300 yuan/㎡ to the budget estimate area:

Item Calculation Result
Lower limit of material amount560 × 25Approx. RMB 14,000
Upper limit of material amount560 × 300Approx. RMB 170,000

Why is the range so wide: 25–300 CNY/㎡ covers the full range from economy texture to custom large slabs, the actual unit price depends on specifications, thickness, texture technology, order quantity and delivery time.The actual transaction amount of this project is subject to the contractnot disclosed on this page.

VIII. Common questions (FAQ)

Why is a hemp-woven texture suitable for hotel guest room walls?

Guest rooms are spaces where people stay for long periods, so walls need to be "easy on the eyes." The woven texture of hemp-woven flexible stone has detail up close and a uniform base color from a distance, so it will not cause visual fatigue over long-term use like strongly textured materials.

For repeated construction of the same layout, how is color difference controlled?

The key is use the same batch of material for the same wall in the same layout. Flexible stone is made from natural mineral raw materials, and slight color tone differences may occur between different batches; for large-area projects, it is recommended to prepare sufficient quantity in one go and mix the material during installation.

How to handle switches and sockets on the headboard background wall?

The cutout position must be layout stage. Map them onto the drawings (sockets, switches, lighting controls, network ports), and cut on site according to the drawings. Temporary on-site drilling will force the seams out of alignment, which is the most common visual issue on guest room walls.

How should the cleaning and maintenance of guest room walls be arranged?

Guest room walls are mainly affected by floating dust and fingerprints, and can be wiped with a dry cloth or neutral cleaner for daily cleaning. The material does not absorb water and is not prone to mold, and the back of walls adjacent to bathrooms is also not prone to dampness; it is recommended to reserve a small amount of spare material per room type for local replacement.

IX. Project File and Contact Information

Project file Content
Project typeHotel guest rooms
Materials usedLinen weave flexible stone (fabric weave and weave series)
Material specifications1220×2930mm | thickness 2.5–3.5mm | single piece about 17kg
Packaging70 Sheets/Case | Approximately 250.2㎡/Case
Construction processFull bonding method, direct wall installation after leveling, no keel required
Implementation standardsJG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Project locationDazhou City, Sichuan Province
Wall areaApprox. 560 ㎡ (◆ budget estimate)
Actual photo record8 pieces

Chengdu Igoods Technology Co., Ltd. (IGOODS) Flexible Stone · PU stone skinwall panel · wood paneling wall · WPC grid panel · Same color wall cabinet door

  • Phone / WeChat / WhatsApp: 19136341389
  • Email: 19136341389@163.com
  • Address: Room 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road (Laifeng Digital Innovation Center), Wuhou District, Chengdu, Sichuan Province, China
  • Services: Free sample delivery · Selection advice · Project quotation · Installation guidance · After-sales response

Content and scope statement: This page records the wall material selection and construction process for this hotel guest room. The material specifications, performance parameters and applicable standards in the text all come from IGOODS product materials and can be verified independently; values marked "★ Engineering Experience" are common industry practices and empirical ranges and are not cited as national standard data; those marked "◆Estimate" are estimated values for area, schedule, and cost calculated according to common industry magnitudes, used to judge the order of magnitude, not measured bills; actual values are subject to project confirmation. The cost section is only used to explain the pricing logic and does not represent an actual bill. The full text contains no performance promises, price promises, or brand rankings. Images are used to display materials and spatial applications; communication materials must be verified against original records and are not to be used as customer acceptance or measured proof.

Find the appropriate wall expression for your project.

Provide the type of space, wall area, and design intention. Communicate about materials, samples, and quotations.

Consulting project material selection ↗
Contact phone number Product Catalog Free Sample
WeChat ID copied