Old South Red Hemp Weave Soft Stone Flexible Stone
Old South Red Hemp Weave Soft Stone is a flexible stone in the Fabric Texture & Weave series, with an Old South Red tone and hemp weave soft stone texture on the surface. It is lightweight, thin, flexible and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores and showrooms. This page provides specifications and packaging parameters, materials and performance, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Old South Red Hemp Weave Soft Stone Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Fabric texture and weaving
- Craftsmanship: Woven embossing
- Main tone: South Red tone, warm within the red
- Texture features: Linen weave texture, with warp and weft interwoven, coarse and natural
- Recommended scenarios: Homestays, hotels, clubs, leisure retail
- Main applications: Building wall
Old South Red Hemp Weave Soft Stone Flexible Stone is part of the IGOODS fabric and weave product line, and the one in this line leaning toward "temperature and focal point." Its texture is warm and delicate, suitable for spaces that need to soften the cold hardness of stone and enhance approachability. Its color tension is clear, making it suitable as a local focal surface rather than for large-area application, so it is more readily prioritized for walls that need to control structural load.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. When purchasing, searching by the term "flexible stone" is least likely to miss items; soft stone and flexible stone-look veneer are also common synonymous names.
Close-up texture characteristics of linen weave flexible stone
Observing the real photo details of Old South Red Woven Hemp Flexible Stone, it can be seen that it has an overall South Red tone, red with warmth. As for the texture, it belongs to the category of "woven hemp texture, with warp and weft interwoven, rough and natural." The texture density is evenly distributed on the same piece of material, and the texture performance at the edges and corners is basically consistent with the central area.
The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 3.5-5.5 | 4 | 220 | 158.4 | 690×1300×1100 | 920 |
| 1200×3000 | 3.5-5.5 | 20 | 60 | 216 | 1300×3100×550 | 1355 |
Optional colors: New South Red, Old South Red, beige (other colors can be customized)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.
Material and performance parameters
At the level of material and performance, several points about this type of material need to be clarified first. The material system is inorganic mineral raw materials plus a polymer flexible substrate, containing no asbestos and no heavy metals, and can be used in indoor spaces with air quality requirements. Light weight, thin panels, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also offers flame retardancy, moisture resistance, and stain resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges of flexible stone as a category of material. The acceptance basis for Old South Red Linen-Weave Soft Stone Flexible Stone in specific projects shall be subject to the valid test report of the selected model, the provisions of the supply contract, and the relevant standards of the project location.
Key installation and construction points
On the construction side, no keels or complex substrate preparation are required; panels can be installed once the wall is leveled, and both dry bonding and wet bonding are compatible. Flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls can all be handled accordingly.
Substrate treatment
Substrate conditions directly determine the final bonding effect, so the substrate acceptance step cannot be skipped: moisture content, flatness and strength must all pass. When the substrate does not meet the standard, it is better to repair first than to install panels directly.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces is Old South Red Hemp Weave Soft Stone Flexible Stone suitable for?
Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.
Homestays and resort spaces
Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.
Hotel public areas
In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.
Clubhouses and reception spaces
Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.
Boutique commercial space
Boutique commercial spaces often pursue material layering within a limited area. This type of texture also has light and dark variations within the same color family, allowing the wall to gain thickness without complex shaping.
What product features does Old South Red Hemp Weave Soft Stone Flexible Stone have?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: It can conform to the curvature of the substrate; this is the most fundamental difference from rigid stone. The degree of bending is related to panel thickness, so it is recommended to confirm the bendable radius at the design stage.
- No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
- Texture customizable: Supports adjusting texture direction and color according to design drafts, and also supports large panels, small panels and special-shaped dimensions, making it easy to coordinate with project layout.
- Old walls can be directly covered: Suitable for secondary renovation of existing walls: no need to demolish down to the substrate, which is friendlier for commercial spaces in operation and occupied residences.
- Convenient on-site cutting: The material can be cut on site and adjusted at any time for dimensional deviations, without relying on factory processing as natural stone does.
Project selection and procurement points for Old South Red Hemp Weave Soft Stone Flexible Stone
The most common problem at the design material selection stage is: the stone texture in the rendering looks great, but after implementation it is distorted due to seams, color differences or shape limitations. The bendable and cuttable characteristics of flexible stone are precisely intended for locations such as curved walls, columns, irregular door headers and shaped curtain walls.
Panels can achieve different surface effects such as deep and light textures, matte and natural cut surfaces, and color and grain can also be adjusted according to the design direction; the gap between the look at drawing stage and the actual scene is relatively controllable, reducing on-site failures.
From regional municipal projects to nationwide engineering centralized procurement, and then to cross-border export, the supply method for flexible stone needs to be arranged separately according to the nature of the project.
What stone-look material to use for irregular wall surfaces, how to construct curved exterior wall stone, and customizable-texture flexible stone are the questions most frequently asked at this stage.
Old South Red Hemp Weave Soft Stone Flexible Stone FAQ
What is the typical lead time?
Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
What common specifications does Old South Red Hemp Weave Soft Stone Flexible Stone have?
For the specific available specifications of Old South Red Hemp Weave Soft Stone Flexible Stone, see the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes, and custom large panels, small panels and special shapes are supported. Actual supply specifications must be confirmed in combination with the selected thickness and packaging method.
Does a difference in thickness lead to different usage scenarios?
There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.
Can samples be sent first?
Yes. IGOODS provides physical samples for design material selection, texture confirmation and project material evaluation. Due to natural differences between batches, it is recommended to use samples from the same batch for final confirmation before large-area construction.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. Our factory is a source manufacturer and can provide physical samples, custom fabrication to drawings, and preferential bulk pricing for projects; foreign trade orders come with customs declaration documents and test reports, with nationwide shipping.
Old South Red Hemp Weave Soft Stone Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.