Seawave Stone Travertine Flexible Stone
Seawave Stone Travertine Flexible Stone is a printed travertine flexible stone in the IGOODS travertine series. Its main color is light gray, and its surface features a seawave stone texture. It is lightweight, flexible, and bendable, suitable for walls in hotels, homestays, commercial spaces, exhibition halls, and more. This page provides specifications and packaging parameters, material and performance, installation methods, and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name: Seawave Stone Travertine Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Travertine series
- Craftsmanship: Printed travertine
- Main tone: Light gray tone, soft and elegant
- Texture features:Seawave stone texture, with natural surface layering and light-dark transitions, and the look of a natural material
- Recommended scenarios:Hotels, homestays, commercial spaces, showrooms, feature walls
- Main applications: Building wall
Seawave Stone Travertine Flexible Stone is part of the IGOODS travertine series product line, and the one in this line leaning toward "background and order." It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance. It has a low presence as a background surface, making it easy to let the visual focus go to furnishings and lighting, so it is more readily prioritized for walls that need to control structural load.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. When purchasing, searching by the term "flexible stone" is least likely to miss items; soft stone and flexible stone-look veneer are also common synonymous names.
The photographed texture characteristics of printed travertine
In the real photo, the surface of Wave Stone Travertine Flexible Stone appears in a light gray tone, soft and elegant. Its texture is characterized by "Wave Stone texture, with natural transitions in surface layering and light-dark variation, and a look that imitates natural material." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.
Light has a fairly obvious effect on this color: under natural side light, the light gray portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.3-2.8 | 2.5-2.8 | 330 | 237.6 | 680×1280×1100 | 900 |
| 1200×2400 | 2.3-2.8 | 10.5-11 | 100 | 288 | 1300×2500×600 | 1170 |
| 1200×3000 | 3.5-4 | 17-18 | 80 | 288 | 1280×3100×550 | 1390 |
Optional colors: Grey, white (other colors customizable)
Packaging notes: Bulk goods are shipped in wooden crates, making loading/unloading and stacking more stable; for export, export wooden crates are recommended to improve compression resistance and moisture protection for long-distance transport. Specification data are subject to order confirmation.
Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The material system is inorganic mineral raw materials plus a polymer flexible substrate, containing no asbestos and no heavy metals, and can be used in indoor spaces with air quality requirements. The material is light, thin, and flexible, can be bent, and is not prone to cracking or deformation; it also has comprehensive performance of flame retardancy, moisture resistance, stain resistance, and UV resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges of flexible stone as a category of material. The acceptance basis for Wave Stone Travertine Flexible Stone in specific projects shall be subject to the valid test report of the selected model, the provisions of the supply contract, and the relevant standards of the project location.
Key installation and construction points
This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.
Substrate treatment
The core requirements for the substrate are "flat, dry and firm": check flatness with a 2 m straightedge; for walls with high moisture content, apply a sealing primer first; sanding and loose layers need to be removed down to a solid substrate. The selection of interface agents differs for different substrates, and it is recommended to confirm according to on-site conditions.
Measurement and layout
During layout, first determine the starting point and the direction of the joints, then position each panel one by one. For large-area walls, it is recommended to first snap lines to control the continuity of horizontal and vertical joints, avoiding accumulated errors panel by panel that lead to slanted joints at the end.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.
Which commercial spaces is Seawave Stone Travertine Flexible Stone suitable for?
Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.
Hotel guest rooms and elevator lobbies
Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.
Homestay guest rooms and public areas
Vacation-oriented spaces emphasize a sense of relaxation and handmade traces, and the randomness of this type of texture fits the "unforced" spatial character perfectly.
Boutique commercial space
Boutique commercial spaces often pursue material layering within a limited area. This type of texture also has light and dark variations within the same color family, allowing the wall to gain thickness without complex shaping.
Brand showroom
Showrooms often need to complete multiple theme changes within the same space, and the wall as a fixed interface needs to be sufficiently enduring. This type of material has neutral tones, so when soft furnishings and lighting are changed, the wall does not need to be touched.
What product features does Seawave Stone Travertine Flexible Stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- High degree of form freedom:At locations requiring continuous curved surfaces or special-shaped closures, the material's cuttability makes shaping much simpler than with rigid stone.
- Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
- Texture customizable: Supports adjusting texture direction and color according to design drafts, and also supports large panels, small panels and special-shaped dimensions, making it easy to coordinate with project layout.
Project selection and procurement key points for Seawave Stone Travertine Flexible Stone
Architectural designers, landscape designers, and commercial interior designers working indoors and outdoors usually pay more attention at the material selection stage to the realism of the stone imitation effect, the naturalness of the veining, and how well the material matches the spatial style. For such projects, the value of flexible stone is not just "looking like stone," but freeing the material from weight and shaping constraints while retaining the visual language of stone.
Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.
Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.
What stone-look material to use for irregular wall surfaces, how to construct curved exterior wall stone, and customizable-texture flexible stone are the questions most frequently asked at this stage.
Frequently asked questions about Seawave Stone Travertine Flexible Stone
What is the difference between Seawave Stone Travertine Flexible Stone and natural stone?
The two belong to different types of materials and should not be simply understood as substitutes for each other. The value of natural stone lies in its unreproducible natural attributes; flexible stone emphasizes being lightweight and thin, construction organization, and form adaptability. Material selection should comprehensively consider the design effect, substrate conditions, material weight, transport method, project budget, and usage environment.
Can construction be done directly on an old wall?
Yes. Flexible stone requires no keel and no complicated substrate preparation; when the flatness of the original finish meets requirements, it can be applied directly as an overlay. If flatness is insufficient, it is recommended to level or repair locally first. Renovation of old houses does not require large-scale removal of the original wall.
How is the environmental performance of Seawave Stone Travertine Flexible Stone?
Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.
What is the typical lead time?
Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.
About IGOODS
IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.
The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.
The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. As a source factory, we support free sample mailing, customization according to drawings, and preferential pricing for engineering bulk orders; for foreign trade, we can provide one-stop supply, with complete qualifications and test reports, nationwide shipping, and after-sales technical support.
Seawave Stone Travertine Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.