Silk Rock Travertine Flexible Stone

Silk Rock Travertine Flexible Stone is a printed travertine flexible stone in the IGOODS travertine series. Its main color is white, with a silk-rock texture on the surface. It is lightweight, flexible and bendable, suitable for walls in hotels, homestays, commercial spaces, showrooms, etc. This page provides specifications and packaging parameters, material and performance, construction methods and acceptance points, along with applicable scenarios and selection suggestions; free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Print hole stone Release:2026-11-12

Product quick information

  • Product name: Silk Rock Travertine Flexible Stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Travertine series
  • Craftsmanship: Printed travertine
  • Main tone: Light white tone, clean and bright
  • Texture features:Silk-rock texture, natural surface layering and light-dark transitions, imitating the look of natural materials
  • Recommended scenarios:Hotels, homestays, commercial spaces, showrooms, feature walls
  • Main applications: Building wall

Silk Rock Travertine Flexible Stone is a flexible stone from the IGOODS Travertine series. This product line is mainly designed around the pores and layering of natural travertine. Silk Rock Travertine Flexible Stone emphasizes the expression of "clean color and lasting appeal"—as a large-area base, it looks clean and does not become tiresome to look at, and it more easily sets off lighting and furnishings.

As a relatively new type of wall material, flexible stone is selected differently from traditional stone. Similar products on the market are also called soft stone finish, flexible imitation stone panel, bendable stone, etc., all referring to the same type of flexible wall material.

The photographed texture characteristics of printed travertine

From the actual product photo, it can be seen that this Silk Rock Travertine flexible stone overall presents a light white tone, clean and bright. The texture expression can be summarized as "silk rock texture, natural surface layering and light-dark transition, imitation natural material appearance." The texture direction is continuous and the transition is natural, without stiff splicing breaks. After installation, it maintains a consistent appearance under natural light or artificial light.

Light has a fairly obvious effect on this color: under natural side light, the light-colored portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.

Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
600×12002.3-2.82.5-2.8330237.6680×1280×1100900
1200×24002.3-2.810.5-111002881300×2500×6001170
1200×30003.5-417-18802881280×3100×5501390

Optional colors: Grey, white (other colors customizable)

Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.

Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.

Material and performance parameters

The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, with no wooden substrate used, so there is no hidden risk of formaldehyde release. In terms of physical performance, ultra-thin lightweight and bendability are two basic characteristics, from which a series of construction advantages derive, such as not cracking, not deforming, and easy conforming to irregular substrates.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The above are the general performance ranges of flexible stone as a category of material. The acceptance basis for Silky Rock Travertine Flexible Stone in specific projects shall be subject to the valid test report of the selected model, the provisions of the supply contract, and the relevant standards of the project location.

Key installation and construction points

This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.

Substrate treatment

Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.

Measurement and layout

At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.

Cutting and hole drilling

When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.

Pasting installation

Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.

Compaction and adjustment

Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.

Edge finishing and acceptance

For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.

What commercial spaces is Silk Rock Travertine Flexible Stone suitable for?

Judging from the types of projects already completed, this color mainly appears in the following directions.

Hotel guest rooms and elevator lobbies

Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.

Homestays and resort spaces

Homestay walls often aim to have both a sense of place and freedom from the weight and construction period of natural stone. This type of texture can restore the look of natural materials with a lower structural burden.

Commercial storefronts and street blocks

Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.

Showroom and display backdrop

The walls of exhibition spaces are essentially a "background" that needs to support the exhibits rather than compete with them. This type of texture has detail up close and reads as a unified whole from a distance, making it suitable for continuous background surfaces.

What product features does Silk Rock Travertine Flexible Stone have?

  • Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
  • Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
  • No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
  • Complete specifications: Conventional specifications are relatively complete, so sizes can be selected directly according to the wall layout, shortening on-site cutting and panel matching time.
  • Texture customizable: Supports adjusting texture direction and color according to design drafts, and also supports large panels, small panels and special-shaped dimensions, making it easy to coordinate with project layout.
  • Old walls can be directly covered: When the flatness of the original finish meets the requirements, it can be directly covered. Renovation projects do not require large-scale removal of the original wall, reducing demolition and disposal steps.

Project selection and procurement points for Silk Rock Travertine Flexible Stone

The most common problem at the design material selection stage is: the stone texture in the rendering looks great, but after implementation it is distorted due to seams, color differences or shape limitations. The bendable and cuttable characteristics of flexible stone are precisely intended for locations such as curved walls, columns, irregular door headers and shaped curtain walls.

Panels can achieve different surface effects such as deep and light textures, matte and natural cut surfaces, and color and grain can also be adjusted according to the design direction; the gap between the look at drawing stage and the actual scene is relatively controllable, reducing on-site failures.

Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.

At the design stage, designers usually compare several approaches at the same time—stone-look flexible panels, ultra-thin flexible stone and bendable exterior wall stone—and then make trade-offs based on the difficulty of the shape.

Silk Rock Travertine Flexible Stone FAQ

What is the construction process for Silk Rock Travertine Flexible Stone?

The conventional process is substrate inspection, on-site measurement and layout, material cutting, pasting, compaction and position adjustment, and edge and corner finishing. The specific plan needs to be determined based on substrate type, wall dimensions and use environment.

Is there a fire rating?

The product has flame-retardant performance; the specific combustion performance rating is subject to the valid test report for the selected model. For public building projects with clear fire protection requirements, it is recommended to directly request the test documents for the corresponding batch at the selection stage.

How much material does a project roughly need?

It is advisable to estimate based on the actual layout area plus a 5%–8% waste allowance. Flexible stone can be bent and cut, and waste at irregular positions will be slightly higher than for flat installation. For the specific quantity, drawings can be provided and the manufacturer can assist with the calculation.

Is there support for engineering bulk procurement?

Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.

About IGOODS

IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.

The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.

Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. Direct supply from the source factory, with free samples, custom fabrication to drawings, bulk project supply, test reports, nationwide shipping, and after-sales technical support.

Silk Rock Travertine Flexible Stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied