White solid-color travertine flexible stone
White solid-color travertine flexible stone is a solid-color flexible stone in the IGOODS Travertine Series, with a light white main tone, clean and bright, travertine pore texture and natural stone veins, and natural transitions of light and dark layers. It is lightweight, thin, flexible and bendable, suitable for hotels, clubs, showrooms and boutique retail. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:White solid-color travertine flexible stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Travertine series
- Craftsmanship: Printed travertine
- Main tone: Light white tone, clean and bright
- Texture features: Travertine pore texture and natural stone veins, with natural transitions between light and dark layers
- Recommended scenarios:Hotels, clubs, showrooms, boutique retail
- Main applications: Building wall
In IGOODS's travertine series, White solid-color travertine flexible stone is a style in the "clean color and enduring appeal" direction. It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance; when applied to actual wall surfaces, it looks clean as a large-area base, does not grow tiresome, and more easily sets off lighting and furnishings.
Flexible stone is a type of veneer material used more often in recent years in commercial fit-outs and exterior walls. Names vary by region: soft stone, flexible stone, flexible stone-look panels, and bendable stone basically refer to the same type of product.
Actual-shot texture features of solid-color travertine
In the real photo, the surface of White Solid-Color Travertine Flexible Stone appears in a light white tone, clean and bright. Its texture is characterized by "travertine pore texture and natural stone veining, with natural transitions in light and dark layers." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.
Light has a fairly obvious effect on this color: under natural side light, the light-colored portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.
If you want richer spatial layering, you can pair several shades from the same series as primary and secondary walls; for full-wall installation, it is recommended to use materials from the same batch to ensure overall color consistency.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.3-2.8 | 2.5-2.8 | 330 | 237.6 | 680×1280×1100 | 900 |
| 1200×2400 | 2.3-2.8 | 10.5-11 | 100 | 288 | 1300×2500×600 | 1170 |
| 1200×3000 | 3.5-4 | 17-18 | 80 | 288 | 1280×3100×550 | 1390 |
Optional colors: Grey, white (other colors customizable)
Packaging notes:Mainly packed in wooden crates, better suited to long-distance transportation and bulk project delivery; export orders can be upgraded to export wooden crates. The specifications, weights and packaging data in the table are for reference, and the actual order confirmation shall prevail.
Customization notes:In addition to standard specifications, custom-shaped dimensions and extra-long panels can be made according to drawings; texture direction and color are subject to the design draft, and thickness can also be adjusted within the standard range.
Material and performance parameters
At the level of material and performance, several points about this type of material need to be clarified first. The substrate is a flexible material composed of natural mineral raw materials compounded with polymers, an inorganic ecological system with no added formaldehyde, suitable for both indoor and outdoor use environments. Light weight, thin panels, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also offers flame retardancy, moisture resistance, and stain resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
Please note that the performance of flexible stone is closely related to substrate conditions, adhesive selection, and installation workmanship. The table above presents the general characteristics of the material itself. For the engineering indicators of White Solid Color Travertine flexible stone in specific projects, please refer to the valid test report for the selected model and the project technical confirmation.
Key installation and construction points
Construction does not rely on a framing system; after the substrate is leveled, it can be directly adhered. Mature methods are available for flat and curved surfaces, columns and irregular curtain walls, old walls, and insulated walls.
Substrate treatment
Flexible stone can be adhered to substrates such as cement mortar walls, concrete walls, gypsum board walls, lightweight partition walls, and insulated wall surfaces. The substrate should be dry, free of floating dust, and free of hollowing; if flatness is insufficient, leveling or local repair should be done first, and walls with too high moisture content need primer sealing treatment first.
Measurement and layout
At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.
Compaction and adjustment
After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.
Edge finishing and acceptance
Where corners cannot be bent directly, metal edge trim or internal corner trim must be used as a transition. During acceptance, focus on checking the hollowing rate, seam consistency, smoothness of closures, and verticality of internal and external corners.
Which commercial spaces is white solid-color travertine flexible stone suitable for?
Judging from the types of projects already completed, this color mainly appears in the following directions.
Hotel guest rooms and elevator lobbies
Walls on guest room floors and elevator lobbies are replaced infrequently, so materials need to withstand long-term use. Flexible stone is scrub-resistant and not prone to marks, and daily cleaning requires no extra process, which is relatively friendly to hotel operations.
Clubhouses and reception spaces
Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.
Brand showroom
Showrooms often need to complete multiple theme changes within the same space, and the wall as a fixed interface needs to be sufficiently enduring. This type of material has neutral tones, so when soft furnishings and lighting are changed, the wall does not need to be touched.
Commercial storefronts and street blocks
Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.
What product features does white solid-color travertine flexible stone have?
- Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: Omitting the keel and base layer means a shorter process and less wet work on site, which is especially friendly for buildings already in use.
- Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.
- Batch supply: Supports full-container shipments and mixed-batch customization, and can provide customs declaration documents, product test reports and qualification documents, facilitating foreign trade and engineering centralized procurement.
- Low-maintenance:The surface does not easily retain marks, and high-frequency use locations in public spaces do not require additional protective measures.
Project selection and procurement key points for white solid-color travertine flexible stone
For commercial decoration companies and full-package renovation companies, the priority in material selection is usually the construction period, labor and acceptance, rather than the material's own color pattern. Flexible stone directly corresponds to these three points: no keel is required for construction, no complex base preparation is needed, and it can be adhered after the wall is leveled, saving one structural process.
The material is flexible, crack-resistant, and impact-resistant, and can adapt to complex site environments. New installers can get up to speed quickly, which helps compress the schedule and labor costs. Fire resistance, moisture resistance, and weather resistance indicators also meet the requirements of routine project acceptance.
Whether it is a same-city commercial renovation project, a regional municipal engineering project, or cross-border foreign trade and nationwide bulk engineering procurement, flexible stone can cover it all.
Lightweight and safe exterior wall stone, flexible decorative stone for indoor and outdoor universal use, a relatively high-frequency search direction in commercial renovation material selection.
White solid-color travertine flexible stone FAQ
Can white solid-color travertine flexible stone be used outdoors?
Yes. Flexible stone has UV resistance, high and low temperature resistance and weathering resistance, and is suitable for exterior facades. For long-term outdoor use, it is recommended to confirm the selection in conjunction with the project location's climate conditions and orientation.
What is the difference between white solid-color travertine flexible stone and natural stone?
The two belong to different types of materials and should not be simply understood as substitutes for each other. The value of natural stone lies in its unreproducible natural attributes; flexible stone emphasizes being lightweight and thin, construction organization, and form adaptability. Material selection should comprehensively consider the design effect, substrate conditions, material weight, transport method, project budget, and usage environment.
What is the installation process for white solid-color travertine flexible stone?
The conventional process is substrate inspection, on-site measurement and layout, material cutting, pasting, compaction and position adjustment, and edge and corner finishing. The specific plan needs to be determined based on substrate type, wall dimensions and use environment.
Is there a fire rating?
The product has flame-retardant performance; the specific combustion performance rating is subject to the valid test report for the selected model. For public building projects with clear fire protection requirements, it is recommended to directly request the test documents for the corresponding batch at the selection stage.
About IGOODS
IGOODS is a manufacturer of flexible stone, soft stone facing and flexible stone-like panels, supplying projects such as indoor and outdoor architectural decoration, commercial decoration and full renovation, hotel and shop renovation, office building renovation, building facades, municipal exterior wall engineering, campus and hospital renovation, old residential community renovation and cultural tourism landscape creation.
The product supports custom specifications, custom textures and custom colors, and can provide large boards, small boards and special-shaped sizes; for export, OEM branding and packaging customization can be done according to customer requirements, and full-container shipping solutions are provided. On the design side, samples and selection support can be provided; on the engineering side, layout and on-site technical coordination can be provided.
The scope of application spans commercial spaces, public buildings and exterior facade projects, and also includes livelihood projects such as campuses, hospitals, and old residential community renovations. Our factory is a source manufacturer and can provide physical samples, customization according to drawings, and preferential pricing plans for engineering bulk orders; foreign trade orders come with customs declaration documents and test reports, and shipping is available nationwide.
White solid-color travertine flexible stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.