Gray Solid Travertine Flexible Stone
Gray Solid Travertine Flexible Stone is a solid-color flexible stone in the IGOODS Travertine Series. Its main tone is a neutral gray with natural light-to-dark transitions, travertine pore texture and natural stone veining, and natural gradation of light and dark layers. It is lightweight, flexible and bendable, suitable for hotels, clubs, showrooms and boutique commercial spaces. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance key points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:Gray Solid Travertine Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Travertine series
- Craftsmanship: Printed travertine
- Main tone: Neutral gray tone, with natural light-to-dark transitions
- Texture features: Travertine pore texture and natural stone veins, with natural transitions between light and dark layers
- Recommended scenarios:Hotels, clubs, showrooms, boutique retail
- Main applications: Building wall
Gray Solid Travertine Flexible Stone is part of the IGOODS travertine series product line, and the one in this line leaning toward "background and order." It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance. It has a low presence as a background surface, making it easy to let the visual focus go to furnishings and lighting, so it is more readily prioritized for walls that need to control structural load.
Its positioning lies between natural stone and conventional wall panels: it retains the look of stone while preparing materials and constructing according to the logic of panels. In inquiries and searches, such products are also often called soft stone panel, flexible stone-like veneer, bendable stone or ultra-thin flexible exterior wall stone.
Actual-shot texture features of solid-color travertine
In the real photo, the surface of Gray Solid-Color Travertine Flexible Stone appears in a neutral gray tone, with natural light-dark transitions. Its texture is characterized by "travertine pore texture and natural stone veining, with natural transitions in light and dark layers." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.
The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.
It should be emphasized that flexible stone is made from natural mineral raw materials, and slight color tone differences may exist between batches, which is also a characteristic of the material itself. For large-area projects, it is recommended to prepare sufficient quantity in one batch and mix materials during layout.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 600×1200 | 2.3-2.8 | 2.5-2.8 | 330 | 237.6 | 680×1280×1100 | 900 |
| 1200×2400 | 2.3-2.8 | 10.5-11 | 100 | 288 | 1300×2500×600 | 1170 |
| 1200×3000 | 3.5-4 | 17-18 | 80 | 288 | 1280×3100×550 | 1390 |
Optional colors: Grey, white (other colors customizable)
Packaging notes: Wooden crate packaging is the standard method, and shipments can be made in batches according to project progress; export orders can use export wooden crates. The above specifications, weights, and packaging dimensions are for reference only, and the final version is subject to contract confirmation.
Customization notes: Supports custom large panels, small panels and special-shaped dimensions. Texture direction, color, texture and thickness can all be adjusted according to project requirements.
Material and performance parameters
The performance of flexible stone comes from the structure of the material itself, not from a thick and heavy panel. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, with no wooden substrate used, so there is no hidden risk of formaldehyde release. In terms of physical performance, it features ultra-thin lightweight, high flexibility, bendability, and resistance to cracking and deformation, while also being fire-retardant, waterproof and moisture-proof, stain-resistant and dirt-resistant, and having a certain degree of UV resistance and high and low temperature resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The above are the general performance ranges for flexible stone as a category of material. For the acceptance of gray solid-color travertine flexible stone in a specific project, the valid test reports for the selected model, the provisions of the supply contract, and the relevant standards of the project location shall govern.
Key installation and construction points
This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.
Substrate treatment
Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.
Measurement and layout
Lay out according to the actual wall dimensions, giving priority to placing whole panels in the positions where the eye lingers most, and leaving cut edges in internal corners or closing details. It is recommended to use the same batch of material for the same wall and to mix and lay out once before installation to reduce concentrated color tones.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
Corners and edges are where flexibility problems most easily appear: the four corners must be compacted separately, and adjacent panels should be checked with a straightedge for flatness. If height differences are found, address them immediately while the adhesive has not yet begun to set.
Edge finishing and acceptance
Where corners cannot be bent directly, metal edge trim or internal corner trim must be used as a transition. During acceptance, focus on checking the hollowing rate, seam consistency, smoothness of closures, and verticality of internal and external corners.
Which commercial spaces is Gray Solid Travertine Flexible Stone suitable for?
The following explains, by project type, where it is suitable and the main reasons for choosing it.
Hotel public areas
In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.
Clubhouses and reception spaces
Clubhouse walls usually carry the role of creating atmosphere, with higher demands on material texture and feel than on pattern. This type of texture has layering under side light and is suitable for use with wall-washing lights.
Brand showroom
Showrooms often need to complete multiple theme changes within the same space, and the wall as a fixed interface needs to be sufficiently enduring. This type of material has neutral tones, so when soft furnishings and lighting are changed, the wall does not need to be touched.
Chain store standardization
Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.
What product features does Gray Solid Travertine Flexible Stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: The panel itself has a certain flexibility and can be bent into an arc within a certain radius for construction, used for wrapping columns, curved walls, and shaped door headers. The specific bendable radius needs to be confirmed based on the model and substrate conditions.
- No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
- Old walls can be directly covered: When the flatness of the original finish meets the requirements, it can be directly covered. Renovation projects do not require large-scale removal of the original wall, reducing demolition and disposal steps.
- Convenient on-site cutting: Conventional thickness can be cut with a utility knife and a straightedge through multiple scoring passes; irregular shapes and openings are trimmed on site, with no need for prefabrication and secondary transport.
- Same-color matching: Different textures under the same color family can be mixed and matched, making it convenient to distinguish primary and secondary walls within the same space without changing the material system.
Project selection and procurement key points for Gray Solid Travertine Flexible Stone
Architectural designers, landscape designers, and commercial interior designers working indoors and outdoors usually pay more attention at the material selection stage to the realism of the stone imitation effect, the naturalness of the veining, and how well the material matches the spatial style. For such projects, the value of flexible stone is not just "looking like stone," but freeing the material from weight and shaping constraints while retaining the visual language of stone.
Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.
Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.
What stone-look material to use for irregular wall surfaces, how to construct curved exterior wall stone, and customizable-texture flexible stone are the questions most frequently asked at this stage.
Gray Solid Travertine Flexible Stone Frequently Asked Questions
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
What common specifications does Gray Solid Travertine Flexible Stone have?
The specific available specifications of Gray Solid Travertine Flexible Stone are shown in the "Specifications and Packaging Parameters" table above. Flexible stone regular stock covers multiple sizes, and customization of large slabs, small slabs and special shapes is supported. Actual supply specifications need to be confirmed in combination with the selected thickness and packaging method.
Does a difference in thickness lead to different usage scenarios?
There is a difference. Thinner specifications are more suitable for interior walls and shaped cladding, while thicker specifications have more margin on exterior facades and in locations with higher impact resistance requirements. When selecting, it is recommended to judge together with the substrate conditions and usage environment.
Will the color of samples and bulk supply be consistent?
Flexible stone is made from natural mineral raw materials. Color tone is relatively stable within the same batch, and slight differences may exist between different batches. It is recommended to use materials from the same batch within the same project and to arrange mixed layout during the layout stage.
About IGOODS
IGOODS takes flexible stone and wood veneer wall panels as its core product systems, using natural mineral raw materials composited with polymer flexible substrates, belonging to inorganic ecological materials, zero formaldehyde, meeting the environmental standards for home decoration, commercial decoration, outdoor engineering and foreign trade export.
The company positions itself as a wall space material solution provider rather than a mere panel supplier, and can provide material selection, physical samples, design coordination and engineering project support for architectural designers, decoration companies, engineering clients and building materials channel clients. Foreign trade orders can be supplied on a one-stop basis, and it has long undertaken overseas exterior wall decoration, building renovation and landscape landscaping needs.
Indoor and outdoor, new build and renovation, commercial and municipal—flexible stone has corresponding case types across these dimensions. Our factory is a source manufacturer and can provide physical samples, custom fabrication to drawings, and preferential bulk pricing for projects; foreign trade orders come with customs declaration documents and test reports, with nationwide shipping.
Gray Solid Travertine Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.