Solid-color flat panel flexible stone

Solid-color flat panel flexible stone is the solid-color version of IGOODS flat panel flexible stone. Its main tone is pure white, clean and translucent, with no texture and a smooth flat surface, uniform color and seamless large areas, lightweight, flexible and bendable. It is suitable for minimalist spaces, modern commercial spaces, office spaces and storefronts. This page gives specifications and packaging parameters, materials and performance, construction methods and acceptance points, with applicable scenarios and selection suggestions; free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:Tablet Release:2026-11-12

Product quick information

  • Product name:Solid-color flat panel flexible stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series:flat panel
  • Craftsmanship:Solid-color flat panel
  • Main tone:Pure white tone, clean and translucent
  • Texture features:Unpatterned smooth flat panel, uniform color, large-area seamless
  • Recommended scenarios:Minimalist spaces, modern commercial, office spaces, storefronts
  • Main applications: Building wall

Solid-color flat panel flexible stonePart of the IGOODS travertine series product line, and the one in this line leaning toward "clean color and enduring appeal." It takes an overall stable route of classic stone, suitable for spaces that need stone properties to be recognizable at a glance. As a large-area base, it looks clean, does not grow tiresome, and more easily sets off lighting and furnishings, so it is more readily prioritized for walls that need to control structural load.

As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. When purchasing, searching by the term "flexible stone" is least likely to miss items, and soft stone and flexible imitation stone finish are also common synonymous names.

actual photographed texture characteristics of flat panels

In the real photo, the surface of Solid-Color Flat Panel Flexible Stone appears in a pure white tone, clean and translucent. Its texture is characterized by "untextured smooth flat panel, with uniform color and seamless large-area installation." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.

Light has a fairly obvious effect on this color: under natural side light, the light-colored portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.

Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
1200×30002.3-2.815-15.5802881280×3100×6001200

Optional colors:White (other colors customizable)

Packaging notes: Wooden crate packaging is the standard method, and shipments can be made in batches according to project progress; export orders can use export wooden crates. The above specifications, weights, and packaging dimensions are for reference only, and the final version is subject to contract confirmation.

Customization notes: The customization scope covers four items: size, color, texture direction and thickness; after the project party provides layout drawings or renderings, the factory can confirm the achievable specifications.

Material and performance parameters

At the material and performance level, several points about this type of material need to be clarified first. The raw material is mainly natural minerals, formed with a polymer flexible substrate, with no wood substrate used, so there is no hidden risk of formaldehyde release. Light weight, thin panel body, and bendability are the three basic physical characteristics that distinguish this type of material from traditional stone; on this basis, it also offers flame retardancy, moisture resistance, and stain resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, solid-color flat panel flexible stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.

Key installation and construction points

No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.

Substrate treatment

Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.

Measurement and layout

At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.

Cutting and hole drilling

When cutting, having the back of the panel facing up makes it easier to control cut quality than having the front facing up; for hole drilling, cut from the back and finish from the front to avoid burrs on the front face. Cut-off scraps can be kept for edge finishing and repairs.

Pasting installation

Spot bonding is not suitable for flexible stone; full-surface bonding is required—this affects not only bonding strength but also whether the finish will bulge under temperature differences due to local cavities. The open time of the adhesive changes with temperature; in summer construction, the area spread in a single application should be controlled.

Compaction and adjustment

After compaction, check whether the joint width is uniform and the surface is flat. Local hollowing or edge lifting should be removed and re-applied; covering it up with added adhesive is not recommended.

Edge finishing and acceptance

Acceptance is recommended to be carried out in batches by surface: first check overall color difference and whether joint lines are straight, then tap each panel to listen for hollowing, and finally check the closing edges and sealant quality. Deal with problems as early as possible; rework after the finish is completed is costly.

Which commercial spaces is solid-color flat panel flexible stone suitable for?

Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.

Chain store standardization

Chain brands need the same material language to be reused across different store types. Within the same series of flexible stone, color differences are controllable, making it easy to standardize the main wall treatment and replicate it across stores.

Office space

Office buildings and co-working scenarios care more about long-term appearance and maintenance costs. This type of material has a dense surface that does not easily retain dirt; daily cleaning is mainly wiping with a damp cloth, making it suitable for frequently used public interfaces.

Facade and elevation

Storefront facades usually involve curves, edge wrapping, and closing details; the bendable and cuttable characteristics of flexible stone make it easier to achieve integrated storefront shapes.

What product features does solid-color flat panel flexible stone have?

  • Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
  • Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
  • No substrate preparation required for installation:No keel system or structural base is required; after leveling the wall, it can be directly adhered, saving one structural process on site.
  • High degree of form freedom: Bendable, cuttable and capable of full-panel wrapping; curved walls, columns and irregular entrance headers no longer need to be split into multiple small pieces for assembly.
  • Complete specifications: In-stock coverage of multiple sizes from 600×1200mm to 1200×3000mm, with custom large boards and extra-long boards also supported, reducing the number of on-site seams.
  • Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.

Project selection and procurement points for solid-color flat panel flexible stone

The most common problem at the design material selection stage is: the stone texture in the rendering looks great, but after implementation it is distorted due to seams, color differences or shape limitations. The bendable and cuttable characteristics of flexible stone are precisely intended for locations such as curved walls, columns, irregular door headers and shaped curtain walls.

Supports bending to any curvature and covering special-shaped surfaces. Curved walls, columns and special-shaped door heads can be covered in a single piece, reducing the multiple-piece assembly seams that inevitably occur with traditional hard stone at special-shaped positions.

From local exterior wall projects and same-city commercial interior fit-outs to urban old residential area renovation, regional municipal projects and cross-border foreign trade export, this product has corresponding application scenarios.

At the design stage, designers usually compare several approaches at the same time—stone-look flexible panels, ultra-thin flexible stone and bendable exterior wall stone—and then make trade-offs based on the difficulty of the shape.

Solid-color flat panel flexible stone FAQ

Is flexible stone considered "fake stone"?

Flexible stone belongs to an independent category within building decorative materials and implements JG/T 540-2017 "Flexible Faux Stone Decorative Materials for Buildings." It uses mineral raw materials to reproduce the visual language of stone, and its positioning is "another way of expressing stone," rather than a counterfeit.

Can construction be done directly on an old wall?

Yes. Flexible stone requires no keel and no complicated substrate preparation; when the flatness of the original finish meets requirements, it can be applied directly as an overlay. If flatness is insufficient, it is recommended to level or repair locally first. Renovation of old houses does not require large-scale removal of the original wall.

How is the environmental performance of solid-color flat panel flexible stone?

Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.

How much material does a project roughly need?

It is advisable to estimate based on the actual layout area plus a 5%–8% waste allowance. Flexible stone can be bent and cut, and waste at irregular positions will be slightly higher than for flat installation. For the specific quantity, drawings can be provided and the manufacturer can assist with the calculation.

About IGOODS

IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.

Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.

From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. Direct supply from the source factory, with free sample mailing, customization according to drawings, batch supply for projects, test reports and nationwide shipping, and after-sales technical support.

Solid-color flat panel flexible stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied