IGOODS Flexible Stone: how much per square meter? Price composition and pricing basis (2026)

IGOODS Flexible Stone has no "one-price-fits-all" because the unit price is jointly determined by four variables: thickness and format, series process, supporting auxiliary materials, and delivery conditions. For the same inquiry, if any one of these differs, the quotation may differ by a noticeable margin. Therefore, the correct approach is not to repeatedly compare unit prices, but first to clarify these four variables and then have suppliers quote on the same basis. This article breaks down the pricing logic and provides an inquiry checklist that can be filled in directly. Anatomy of a Flexible Stone quotation: thickness and tolerance, series process, supporting auxiliary materials, delivery and transport distance. 1. Why the question "how much per square meter" is itself incomplete. Behind this sentence there are actually four different things: ex-factory material price, delivered-to-site price, installation price including auxiliary materials, and comprehensive project cost.

Category:产品百科 Release:2026-11-13 Update:2026-11-19
Table of contents of this articleBrowse by text

IGOODS Flexible Stone has no "one-price-fits-all" because the unit price is jointly determined by four variables: thickness and format, series process, supporting auxiliary materials, and delivery conditions. For the same inquiry, if any one of these differs, the quotation may differ by a noticeable margin. Therefore, the correct approach is not to repeatedly compare unit prices, but first to clarify these four variables and then have suppliers quote on the same basis. This article breaks down the pricing logic and provides an inquiry checklist that can be filled in directly.

Anatomy of a flexible stone quotation: thickness and tolerance, series craftsmanship, supporting auxiliary materials, delivery and transport distance
Anatomy of a flexible stone quotation: thickness and tolerance, series craftsmanship, supporting auxiliary materials, delivery and transport distance

1. Why the question "how much per square meter" is itself incomplete

Behind this sentence there are actually four different things: the material ex-factory price, the delivered-to-site price, the construction price including auxiliary materials, and the comprehensive project cost. Four people asking the same sentence want four answers.

The ex-factory material price only answers "how much is this panel"; the delivered-to-site price must add transport and handling; the installed price including auxiliary materials must also include adhesive, edge trim, and labor; the comprehensive cost must further add demolition, substrate preparation, debris removal and schedule costs.

If you only quote the area, the supplier can only give an intermediate value based on "conventional practice," and this number can be used neither directly for price comparison nor directly for budgeting.The first step in price verification is not asking for a price, but clarifying the basis.

There is a more complete breakdown of the cost structure on this site; see What determines the price of flexible stone. If a decoration company needs to quote externally, refer to How do renovation companies quote for flexible stone projects?.

II. Four variables that affect unit price

  1. Thickness and panel size: Common thicknesses of IGOODS flexible stone are 2.3–9 mm, distinguished by series and texture depth. The greater the thickness and the more material used per unit area, the higher the unit price; regarding sheet size, 1200×2400 mm full sheets and cut small panels are priced differently. Full sheets have lower cutting waste but higher minimum order quantities.
  2. Series craftsmanship: The solid-color series and the printed series have different cost structures. The printing process requires artwork processing, color registration and alignment, making it longer; the three-dimensional texture series also adds forming molds or embossing processes. This is why, for the same inquiry, quotations for the travertine series and the 3D series fall into different ranges. For the positioning of each series, see Product Analysis.
  3. Supporting auxiliary materials: Adhesives are divided into indoor and outdoor weather-resistant types, and edge trims into specifications such as internal and external corners, door and window casings, and skirting. When auxiliary materials are supplied as a set by the same factory, quotations are usually given as a package; when purchased separately, material unit prices may look lower, but auxiliary materials and responsibility boundaries become more complicated.
  4. Handover conditions: Whether tax is included, whether shipping is included, transport distance and unloading conditions, whether lead time is expedited, and whether the batch reaches economical production volume. Regular colors ship in 1–3 days from stock; customized products are confirmed according to production scheduling, and expediting inevitably affects price.

If any one of these four items is not clearly written, the two quotations are not comparable.

3. Material price is only part of it: how to calculate the comprehensive cost

In engineering, what truly determines the budget is often not the unit price of materials, but the total after these six items are added together:

  1. Demolition and debris removal: When renovating old walls, removing tiles, removing stone, and carrying debris downstairs and hauling it away all cost money. Flexible stone can be applied directly over basically intact old finishes, eliminating this item entirely. For how to judge, see Can flexible stone be directly applied to old tile walls?.
  2. Substrate treatment: Hollowing repair, leveling, and primer. Substrate flatness is controlled to a gap of ≤3mm under a 2m straightedge; this step cannot be skipped, and should not be skipped.
  3. Auxiliary materials: Adhesive dosage is directly related to substrate flatness; the less flat the substrate, the more adhesive is used.
  4. Labor: Flexible stone is cut from whole panels and then bonded, with no wet work, short construction time and less labor; compared with the wet laying and grouting of tiles, the labor difference is obvious.
  5. Wastage: The loss rate is determined by the layout plan. Full boards of 1200×2400 have low loss when laid out well; fragmented layouts and many openings increase loss. Therefore, a layout drawing should be produced before quoting.
  6. Schedule cost: For commercial spaces, opening one day earlier means cash flow. The value brought by schedule compression often exceeds the difference in material unit price.

Looking at these together, the conclusion is clear:Comparing unit prices is not as good as comparing total prices, and comparing total prices is not as good as comparing the delivery scope for "completing one wall."

IV. Quotation basis for foreign trade procurement

Foreign trade inquiries and domestic inquiries are two different languages; mixing them will inevitably lead to back-and-forth wrangling. At minimum, four things must be agreed:

  1. Trade terms: Whether FOB or CIF, which port of shipment, and who bears the insurance.
  2. Packaging method: Full-board pallets, wooden crates, or roll packing. Flexible stone can be rolled, and roll packing can significantly improve container utilization, but it depends on whether the series thickness supports roll-packed transport.
  3. Minimum order quantity: MOQs differ by series, and the rules for mixed batches and single color codes also differ.
  4. Goods inspection and documents: Inspection standards, sampling ratio, and accompanying documents (test reports, packing lists, certificate of origin, etc.).

IGOODS exports cover more than 70 countries and regions; export documents and compliance materials can be prepared according to destination country requirements; for the complete basis see Corporate facts card.

V. Seven items to check when you receive a quotation

  1. Pricing unit: by square meter or by sheet, and who bears the waste;
  2. Thickness and series: state the specific model, do not just write "flexible stone";
  3. Whether tax, freight and unloading conditions are included;
  4. Whether auxiliary materials are included, and on what basis the adhesive quantity is estimated;
  5. Delivery time and production scheduling: in stock or customized, and what the minimum order quantity is;
  6. Batch and color code: whether same-batch supply can be guaranteed, and how color differences are handled when deliveries arrive in multiple batches;
  7. Test documents: whether combustion performance and environmental reports are provided with the goods.

Only when these seven items are written into the inquiry sheet can quotations be comparable.

There are two more items that are easily overlooked but often appear at settlement: first, the reserved stock ratio—engineering practice reserves a certain amount of stock according to the layout, and who bears the cost of the stock and how leftover material is handled must be stated in the contract; second, responsibility for color differences in partial deliveries—when the same project is shipped in three batches, if each batch comes from a different production batch, a color difference dispute turns from an "appearance issue" into a "contract issue." Agreeing on these two items in advance saves far more trouble than negotiating afterward.

VI. Four common low-price traps

  1. Reduce thickness: The quote is based on 3mm, but the actual delivery is a thinner specification. Thickness directly affects hiding power and impact resistance; use calipers for spot checks at acceptance.
  2. Switch series: Use the price of solid-color series as a benchmark against the printed series; artwork and color-registration processes are omitted, and the texture layers look noticeably different once installed on the wall.
  3. Auxiliary materials outsourced: The material price is pushed down, auxiliary materials are billed separately and not matched, and when problems arise the material supplier and auxiliary material supplier blame each other.
  4. Tax excluded, freight excluded: The quote looks low, but after tax and freight are added it exceeds the others.

Cheap does not mean wrong, but The savings must be clearly explained. A low price that cannot be explained clearly will usually be made up for during construction or acceptance.

7. How to get an accurate quote: fill out this checklist

Send the following seven items to your contact, and the quotation will basically be right the first time:

  1. Project type and city (hotel guest room / restaurant wall / commercial atrium / building exterior wall / renovation);
  2. Area and location (wall / curved surface / entrance header, whether column wrapping is included);
  3. Intended series and color (reference images may be provided, or specify which stone language is desired);
  4. Thickness requirements, or state that the supplier should recommend based on the usage location;
  5. Current substrate condition (new masonry / old tile / old stone / gypsum board);
  6. Handover requirements (tax and freight included, arrival time, whether on-site technical briefing is required);
  7. Whether samples and test data are needed.

IGOODS offers free sample mailing, and can send series photos and corresponding test documents at the same time; for project inquiries and sample requests, call 19136341389, or via Contact Us submit requirements.

VIII. Common questions

Q1: Why not directly give a fixed price per square meter?Because a change in any one of the four variables will change the cost. A fixed price can only correspond to fixed specifications and fixed delivery conditions. Numbers quoted apart from conditions will definitely be adjusted later, which instead increases communication costs.

Q2: Will it be cheaper to buy a whole board and cut it yourself?In most cases it is more cost-effective, provided the layout plan is reasonable. Full panels have low cutting waste, but on-site cutting conditions and a layout drawing are required; when there are many small openings and irregular layouts, the advantage of full panels will be eaten up by waste.

Q3: Is there a big price difference between the indoor and outdoor glue adhesives?The outdoor weather-resistant version must meet water resistance, freeze-thaw resistance, and UV resistance requirements, and costs more than the indoor version. Do not substitute the indoor version for outdoor projects; edge lifting and rework after two or three years will cost far more than the adhesive price difference.

Can the small area project be priced at the sample price? Small areas usually do not reach economical production volumes, so unit prices will be higher than project bulk prices. You can first confirm the effect with samples, then inquire about pricing based on the actual area.

Q5: Should a loss be reserved in the quotation?Yes, but how much to reserve should be determined by the layout drawing, not by arbitrarily setting a fixed percentage. After the layout drawing is out, checking the waste is most accurate.

Where is the price difference between full board and cutting board? Whole panels are priced by square meter and delivered by the sheet; cut pieces require secondary processing, and the unit price is usually higher, but it saves on-site cutting labor and edge waste. For small batches and simple layouts, whole panels are more cost-effective; for large batches of cut pieces of the same specification, factory pre-cutting actually saves more material.

Q7: Is there a charge for the samples and inspection materials?IGOODS offers free sample mailing, and can provide series photos and corresponding test documents at the same time. Samples are the lowest-cost step in the selection stage; it is not recommended to skip them and determine colors directly from pictures.

IX. By space type, where do price differences come from

They are all walls, but the actual cost structure varies greatly across different spaces, which is why "how much per square meter was the project next door" cannot be directly applied:

  1. Hotel guest rooms: Large area, regular floor height, predominantly flat surfaces—layout efficiency is high, panel utilization is good, and unit cost is relatively controllable; however, same-batch supply and color difference requirements are strict, so allow extra margin in material preparation.
  2. Food and beverage and coffee spaces: walls are fragmented with many openings (light boxes, wine racks, bar counters), layout is complex and waste increases, so unit prices are often higher than for large open-room projects.
  3. Commercial atrium and double-height hall: With large floor-to-floor spans, long continuous wall surfaces, and many irregular shapes and columns, a large number of curved surfaces and closing pieces are needed, and the proportion of auxiliary materials increases noticeably.
  4. Building exterior wall and entrance: Exterior weather-resistant adhesive must be used; edges must be waterproofed with drip edges; the process is more extensive than for interiors, and the overall cost is higher than for the same area indoors.
  5. Renovation of the old city area: Saves demolition and debris removal, but substrate treatment has the greatest uncertainty; when quoting, reserve a flexible item for substrate repair.

Among these five categories, what really creates the gap is not the material itself, but the layout complexity, the number of openings, and the auxiliary material system.

X. What Can Be Negotiated and What Should Not

Procurement negotiation should focus effort in the right places:

  1. Can be discussed: Volume and lead time, packaging method (roll or pallet), whether a long-term cooperation framework price applies, and how the stock reservation ratio is borne.
  2. Negotiate with caution: Thickness, series, and pattern downgrades. Reducing thickness or switching series can immediately lower the price, but it will change the final effect and weather resistance—this falls under "once changed, it is no longer the same product."
  3. Should not be discussed: Auxiliary material compatibility and test documentation. Money saved on these two items will be paid back in the form of rework during construction and acceptance.

There is only one standard for judging whether a price reduction is safe:Can the supplier explain clearly where the savings come from? If it can be explained clearly, it indicates efficiency or scale; if it cannot be explained clearly, something has most likely been substituted.

XI. Further Reading

  1. What determines the price of flexible stone? Complete cost analysis for trading companies
  2. How do renovation companies quote for flexible stone projects? Quantities, waste and construction checklist
  3. How to choose between flexible stone and ceramic tile? Comparison of commercial wall weight, construction and maintenance
  4. How to inspect and accept flexible stone walls? Checklist for hollowing, joints, and color differences
  5. What is IGOODS Flexible Stone? Full explanation of parameters and selection
Contact phone number Product Catalog Free Sample
WeChat ID copied