Application analysis of approximately 1,860㎡ of New South Red coarse rammed earth at a Chongqing atrium hot pot restaurant

How does an atrium-style hot pot restaurant use New South Red rough rammed earth to organize large-area walls? The Chongqing case discusses the material batching, texture continuity, corners and overall visual impression under lighting for different facades. The area is based on the scope stated in the original case.

Category:Case Analysis Release:2026-09-23 Update:2026-11-19

Is coarse rammed earth flexible stone really suitable for dining spaces? Rather than memorizing parameters, it is better to look at a real project that has already been delivered.

To sum up in one sentence:

Rather than comparing parameters through a screen, it is better to see how a completed project answers these questions.

For new projects, look at renderings; for renovation projects, look at the medical records. In a space that has been lived in for ten years, the walls have far more stories behind them than bare walls: modified electrical points, added partition walls, and water seepage spots patched again and again. Wall inspection before entering the site is more important than any material selection meeting.

Cylindrical column cladding is the part that most tests layout skills. The panels wrapping the column must either be bent as a whole sheet or joined in segments; segments inevitably mean vertical seams, and the seam positions should fall in dark areas where the column meets the wall, not directly facing the passage. For columns with small radii, first wrap a physical panel sample around the column to check springback, then decide between full wrapping and piecing.

The page of tables handed to the client

No empty talk; the project basics are as follows.

CityNan'an District, Chongqing
Space typeFood & Beverage Spaces
Business typeAtrium-style hot pot restaurant
Main material.Coarse rammed earth flexible stone (Xinnanhong)
Construction areaApprox. 1,860 ㎡
Construction period30 working days
Schedule30 working days
Implementation standardsJG/T 540-2017
Construction locationWalls of the atrium, corridor, spiral staircase and hall in a hot pot restaurant

Dampness in underground spaces is a slow-acting issue. The finish can resist mold, but when air humidity is high, condensation will still form water. For projects where fresh air and dehumidification are inadequate, removable inspection nodes should be reserved in the wall solution.

For business types with strict fire acceptance requirements (cinemas, KTVs, education and training), besides the finish itself, the construction method also matters: whether the cavity needs insulation fill and whether the keel needs a fire-retardant coating. Clarify the acceptance criteria at the material selection stage, rather than changing the plan after entering the site.

The correct approach to knock and bump repair is to replace the panel rather than touch up the paint. Reserving 3%-5% spare material when ordering is for exactly this purpose: the real problem is when the replacement panel does not match the batch color difference. Spare material stored in the warehouse is much safer than loose panels left on site.

The ceremony on handover day actually has practical value: bring the owner, designer and contractor together on site and walk through the sample wall, tiled surfaces and patch locations together. Every item confirmed face to face is a no-argument clause for the future warranty period.

With the same quote, whose money is spent where it matters most? When the material grade is the same, the difference usually comes down to two items: waste and substrate treatment. A crew willing to spend an extra half day on setting out can reduce cutting waste by two percentage points, which is far more respectable than cutting the material budget.

Layout and quantity accounting

This project's layout has only one theme: leave the complete surface for the first glance. Set the starting point behind the furniture, and push all other cut positions to the rear. Vein-matching positions are marked on the drawing in advance; workers only take panels by number, and the layout is responsible for the veining.

Schedule and organization

In terms of schedule, 30 working days. There was a power outage for maintenance in the middle, so the crew switched to setting out and did not let the days go empty.

There are two schools of internal/external corner treatment: full-sheet wrapping and mitered corners. Full-sheet wrapping looks good but demands strict right-angle precision from the substrate; mitered corners are safer, and the eye can accept a slightly offset seam position. External corners in public spaces have a high probability of being hit; better to use mitered corners plus corner guard edging than to gamble for appearance.

Four passages copied from the archive

Three passages of original text from the handover file, placed here in the chapter order at the time, with numbers and wording unchanged:

Customer industry usage scenario: the real requirements for walls in an atrium-style hot pot restaurant

A dense surface that can be wiped with a neutral cleaner is a basic requirement and a key variable in later maintenance costs. At the layout stage, the light strip positions must be finalized together with the seams; the wall cannot be finished first and the lights installed afterward. The adhesive method without furring strips can proceed continuously, without erecting a separate dry-hanging frame for each floor—this is the most obvious difference from dry-hung stone.

Material comparison: why choose "coarse rammed earth flexible stone"

This project ultimately chose coarse rammed earth flexible stone because the atrium is covered full height across floors, and the rammed earth texture works both up close and from a distance. When comparing wall materials side by side, what really determines the selection is often not "which one looks better," but whether the substrate can bear the load, whether the schedule can be compressed, and whether the shape can be achieved. What atmosphere does the space want? The corridor parapet wall is non-load-bearing, and the rammed earth panel can be applied directly without dry hanging.

Communication and confirmation process

Construction party: If the light strip is hidden in the wall joint to wash the wall, will it reveal the joint? Us: Yes. Designer: Can the curved balustrade wall by the staircase be done in one continuous piece? Us: Yes, the joint can follow the arc. Us: Perfect; the material has low self-weight, so it can be applied directly to the masonry wall after leveling.

Usage effect and daily maintenance

The same wall looks different under different color temperatures: warmer under warm light and more neutral under cool light, which is also why it is recommended to first send physical samples for comparison under actual lighting. Whether the transitions are handled well directly determines whether the facade looks "clean" or "fragmented". This article does not provide a single quotation to avoid misleading; for a project quotation, please provide area, color, and delivery location.

A blunt statement in the archive

The most quoted line at the review meeting: 2.0 Why was coarse rammed earth flexible stone chosen? This is a heavy F&B project with an atrium and a spiral staircase; the wall area is the largest and the shapes are the most complex.

A checklist for the next project

Give friends who also do restaurant spaces a self-check list; only when the conditions are checked does the material come up for discussion:

  • Joint feel (run a fingernail along to check for height difference), straightness of edge sealant, skirting transition, accuracy of switch panel openings
  • Batch verification (batch number on the back of the panel), tight joints in wet areas, wrinkle-free wrapping of columns, texture alignment on feature walls
  • Measured record of substrate moisture content
  • Hollowing rate (tap each panel), joint width uniformity (check with a string line), verticality of external corners (straightedge), panel color difference (inspect under side light)

Lightweight partition walls are the most common problem type in commercial space renovation. Substrates such as gypsum board and calcium silicate board have limited load-bearing capacity themselves; traditional stone on walls either requires reinforcement or dry hanging, and both cost and thickness remain high. Thin flexible finishes use the full-bonding route, with unit dead weight controlled at the level of a glass of water; lightweight walls can achieve a stone texture without major work, which is why it is singled out.

How construction proceeds

Full-surface bonding sounds simple, but the adhesive's open time is a hidden threshold. Adhesive must be spread to over 90% coverage; hollow spots always come from the remaining 10%.

For projects under nighttime construction, daytime is not for rest but for preparation: panel cutting, pre-layout, sorting and numbering are all completed during the day, and only bonding and compaction are done at night. Clarify the division of work between the two shifts during the briefing.

New South Red under the lighting of this space

The natural-light period and the lighting period are two different walls. Before delivery we specifically looked once in the morning and once in the evening: red and orange only look right under high-color-rendering lighting, and tend to look dull under ordinary downlights; be sure to compare colors on site.

Follow-up visit on usage status

Don't overcomplicate maintenance. Use a soft cloth with clean water, and a neutral cleaner for stubborn stains; don't use steel wool; if it gets chipped, don't repair it yourself—take a photo and send it back for a matching piece replacement—that's all.

Leaving three days for ventilation before acceptance prior to opening is spending a little to achieve a lot. The finish itself does not retain odors, but adhesive joints and backing will retain construction residue; coordinate with the schedule in advance and include this period in the plan.

Questions received after the project ended

By the way, answering a frequently asked question: what about fire performance? The material has flame-retardant properties; the specific combustion performance rating is subject to the valid test report for the selected model. If the project has clear fire rating requirements, please state them before ordering.

How much difference is there in texture compared to natural stone?

A: Close-up, differences can be seen: natural stone has random changes naturally generated, the texture of rough rammed earth flexible stone is formed by embossing or printing, and the consistency of the same model is higher. From a distance, the overall sense is close. When placing natural stone and flexible materials on adjacent walls in the same space, it is recommended to do a small sample comparison first.

Q: Does the material have test reports? What standards does it comply with?

Answer: JG/T 540-2017 "Flexible Stone-like Decorative Facing Materials for Buildings" (issued by the Ministry of Housing and Urban-Rural Development) is implemented. Environmental and combustion performance test reports for the corresponding models can be provided with the goods.

Someone asked this: can curved walls and wrapped columns be done in one whole panel? Yes. The material has a certain flexibility and can bend within a certain radius, so cylindrical columns, curved walls, and irregular corners can be fully wrapped with continuous seams. The specific usable radius depends on the selected model, thickness, and substrate conditions; it is recommended to first test-bend a physical sample at the corresponding curvature for confirmation.

The most common dispute at site handover is "floor protection." After the walls are finished, ceiling, flooring and furniture will come in next; whoever damages them pays. One handover form, one layer of protective film and one ring of warning tape can settle most conflicts.

Daytime natural-light hours are the litmus test for concealed works. Color differences, misaligned joints, and adhesive marks all show up during this period. Scheduling an afternoon acceptance inspection is more practical than any sales pitch.

The enemies of dining space walls are arranged by location: at the entrance it is sand and mud abrasion, at booths it is chair-back impact, and in the back-of-house passage it is oil fumes and water. Using different termination logic for different locations is more cost-effective than a uniform whole-wall approach — spend the impact-resistant budget where impacts occur.

The most valuable thing in construction organization is rhythm. Before the crew enters the site, the sample wall, layout marking, and material preparation should all be completed; the most commonly seen waste on site is boards not arriving, people waiting, and lights on. Organize transfer according to "materials never touch the ground," finish and clean the work area the same day, and the construction period will naturally be shortened.

Same project, same batch is an iron rule. Batch variation of flexible finishes is controlled within the standard range, but when large surfaces are placed side by side, even half a grade of color difference still stands out. For projects with a single area exceeding 1000㎡, our approach is one-time production scheduling, unified batch numbers, and box numbering by floor or area, with panels taken by matching number during installation.

On-site photos of a dining space

On-site photos are more honest than renderings. Here are a few photos taken at the time; look at the images first, then we'll discuss the details:

Food and beverage entrance, warm red vertical-grain wall with illuminated shop name
Figure 1 · Restaurant entrance, warm red vertical-grain wall and illuminated store name
Reception area, warm red vertical-grain background wall and dark front desk
Figure 2 · Reception area, warm red vertical-grain feature wall and dark front desk
Spiral staircase, warm red wall and wood-colored handrail
Fig. 3 · Spiral staircase, warm red wall and wood-colored handrail
Open kitchen window, warm red wall and column
Figure 4 · Open kitchen window, warm red wall and cylindrical column

Food and beverage entrance, warm red vertical-grain wall with illuminated shop name. It is not obvious from a distance; only up close can you see that the layout follows 1220×2930 panels.

This photo was taken right after finishing a detail: reception area, warm red vertical-textured feature wall and dark reception desk.

Review notes

If we could start over, we would allow half a day more for material preparation quantities. The rest of the process can stay the same and still be delivered.

Coarse rammed earth flexible stone versus coarse rammed earth: how we compared them at the time

The owner was "won over" by the samples: on the day the three candidates were compared on the wall, once the layering of coarse rammed earth flexible stone emerged under angled light, the other two columns were never mentioned again. One-time production locks the batch number, so no misaligned color differences are visible on large surfaces.

On the day the owner visited the site

For acceptance of this type of project, it is recommended to walk through once during the day and once at night. Every item on the acceptance form must be traceable to a physical spot on the wall.

The edges and corners are where the real skill lies

Everyone can install the large surfaces; what really takes time on this project are a few inconspicuous edges: corner guards with exposed joints at the edges—if something hits it, that is the corner guard's job, not the panel's.

Related reading

Compare them side by side for more confidence:

Contact phone number Product Catalog Free Sample
WeChat ID copied