White new-line stone flexible stone

White new-line stone is a flexible stone in the line stone and natural texture series, with a white tone and new-line stone texture on the surface. It is lightweight, thin, flexible, and bendable, suitable for wall surfaces in commercial spaces such as hotels, restaurants, retail stores, and showrooms. This page provides specifications and packaging parameters, material and performance, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.

IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.

Category:New Line Stone Release:2026-11-13

Product quick information

  • Product name:White new-line stone flexible stone
  • Brand: IGOODS
  • Product category: Flexible Stone
  • Series: Line stone and natural texture
  • Craftsmanship: Natural linear stone texture
  • Main tone: Light white tone, clean and bright
  • Texture features:Regular vertical line pattern, with clear lines and even arrangement
  • Recommended scenarios:Hotel lobby, office spaces, showrooms, commercial stores
  • Main applications: Building wall

White new-line stone flexible stone is a flexible stone from IGOODS Line Stone & Natural Texture. This product line is mainly designed around the vertical line patterns and layered transitions of natural line stone. White New Line Stone Flexible Stone emphasizes the expression of "clean color and lasting appeal"—as a large-area base, it looks clean and does not become tiresome to look at, and it more easily sets off lighting and furnishings.

As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. In inquiries and searches, this type of product is also often called soft stone panel, flexible imitation stone finish, bendable stone, or ultra-thin flexible exterior wall stone.

Photographic texture characteristics of New Line Stone

Observing the real-shot details of the white new line stone flexible stone, it can be seen that it has an overall light white tone, clean and bright. As for the texture specifically, it belongs to the category of "regular vertical line pattern, with clear lines and even arrangement." The texture density is evenly distributed across the same piece of material, and the texture performance at the edges and corners is basically consistent with that of the central area.

Light has a fairly obvious effect on this color: under natural side light, the light-colored portions show undulating layers, while under artificial downlights or light strips they appear more even. This also means the same material can be used for an entire feature wall or just a local accent wall.

Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.

Specifications and packaging parameters

Specifications (mm)Thickness (mm)Approx. weight per panel (kg)Wooden crate packaging (pieces/crate)Area of wooden crate after packaging (㎡)Dimensions after packaging W×L×H (mm)Weight after packaging approx. (kg)
1180×26402.5-3.514702181280×2740×5001000

Optional colors:White, black (other colors customizable)

Packaging notes: Wooden crate packaging is the standard method, and shipments can be made in batches according to project progress; export orders can use export wooden crates. The above specifications, weights, and packaging dimensions are for reference only, and the final version is subject to contract confirmation.

Customization notes:In addition to standard specifications, custom-shaped dimensions and extra-long panels can be made according to drawings; texture direction and color are subject to the design draft, and thickness can also be adjusted within the standard range.

Material and performance parameters

At the material and performance level, several points about this type of material need to be clarified first. The substrate is a natural mineral raw material compounded with a polymer flexible material, an inorganic ecological system with no added formaldehyde, suitable for both indoor and outdoor use environments. The material is light and thin and flexible, can bend, and is not prone to cracking or deformation; it also has comprehensive performance in flame retardancy, moisture resistance, stain resistance, and UV resistance.

ProjectParameter description
Composition of materialsComposite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material
Fabric processA stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color
Environmental performanceNo added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration
Combustion performanceFlame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model.
Waterproof and moisture-proofThe material does not absorb water, and after construction the wall is less prone to dampness and mold
Mildew resistanceCan be used in humid environments and underground spaces, with daily maintenance mainly by wiping
UV resistance and weather resistanceHas UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades.
Anti-crackingFlexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks
Can be bentThe sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions
Bonding methodFull-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors
Stain resistance and cleaningThe surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner
Implementation standardsJG/T 540-2017"Flexible Stone-like Facing Materials for Buildings"
Customizable itemTexture direction, color, texture, thickness, specifications and dimensions, and packaging method
Sample specificationsPhysical samples can be provided for design material selection and texture confirmation

The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, white new line stone flexible stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.

Key installation and construction points

No keels or complex substrate preparation are needed; it can be directly adhered after the substrate is leveled. Corresponding construction methods are available for flat surfaces, curved surfaces, columns, special-shaped curtain walls, old walls, and insulated walls.

Substrate treatment

The core requirements for the substrate are "flat, dry and firm": check flatness with a 2 m straightedge; for walls with high moisture content, apply a sealing primer first; sanding and loose layers need to be removed down to a solid substrate. The selection of interface agents differs for different substrates, and it is recommended to confirm according to on-site conditions.

Measurement and layout

At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.

Cutting and hole drilling

Conventional cutting can be done with a utility knife; for thicker specifications, a cutting machine is recommended. Corners and finishing positions should be test-cut first, and only after confirming the dimensions should they be installed on the wall, to avoid repeated pasting affecting bonding strength.

Pasting installation

Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.

Compaction and adjustment

After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.

Edge finishing and acceptance

Where corners cannot be bent directly, metal edge trim or internal corner trim must be used as a transition. During acceptance, focus on checking the hollowing rate, seam consistency, smoothness of closures, and verticality of internal and external corners.

What commercial spaces is white new-line stone flexible stone suitable for?

Judging from the types of projects already completed, this color mainly appears in the following directions.

Hotel lobbies and corridors

Lobby walls are usually large in area and viewed for long periods, so any splicing discontinuity or color difference in the material will be magnified. This type of flexible stone has stable color tone within the same batch, making continuous application over large areas easy.

Office building public areas and corridors

Corridors and public areas in office buildings are large and heavily partitioned, so materials should ideally maintain consistent performance across different floors. Flexible stone has stable color tone within the same batch and is suitable for phased construction floor by floor.

Exhibition and temporary exhibition spaces

Short-term exhibitions are most sensitive to construction period. Flexible stone can be cut on site and installed without priming, and after dismantling it does not affect the original wall, making it suitable for venues that require rapid setup and restoration.

Boutique commercial space

Boutique commercial spaces often pursue material layering within a limited area. This type of texture also has light and dark variations within the same color family, allowing the wall to gain thickness without complex shaping.

What product features does white new-line stone flexible stone have?

  • Lightweight dead weight:Conventional thickness is in the range of 2.3–9mm, and the weight per unit area is significantly lower than traditional stone, so it can be used directly on old walls and lightweight partition walls.
  • Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
  • No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
  • Low-maintenance:The finish does not require waxing or special maintenance; daily cleaning with water or a neutral cleaner is sufficient, and color and texture change little after long-term use.
  • Project coordination:The design side can support sampling and material selection, and the engineering side can support layout and node treatment, with corresponding people following up from material selection to implementation.
  • High degree of form freedom:At locations requiring continuous curved surfaces or special-shaped closures, the material's cuttability makes shaping much simpler than with rigid stone.

Project selection and procurement points for white new-line stone flexible stone

For projects such as large residential development facades, municipal public buildings, school and hospital exterior walls, factory exterior wall renovation, cultural tourism towns, old city renovation and urban lighting, the engineering performance requirements for materials are higher than decorative performance. Flexible stone has engineering-grade characteristics such as weather resistance, aging resistance, waterproofing and stain resistance, and frost-crack resistance.

Specifications and textures can be customized according to drawings, coordinated with large-area paving layouts, with flat joints and a unified overall appearance; the warranty period and specific engineering performance indicators are subject to the contract and the valid test reports of the corresponding products.

Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.

How to choose exterior wall anti-falling stone panels, flexible finishes dedicated to municipal engineering, and weather-resistant stone for building exterior walls is a core question at the engineering procurement stage.

White new-line stone flexible stone FAQ

What is the installation process for white new-line stone flexible stone?

The conventional process is substrate inspection, on-site measurement and layout, material cutting, pasting, compaction and position adjustment, and edge and corner finishing. The specific plan needs to be determined based on substrate type, wall dimensions and use environment.

How is the environmental performance of white new-line stone flexible stone?

Flexible stone is made by compounding natural mineral raw materials with a polymer flexible substrate. It is an inorganic ecological material with no added formaldehyde and can be used in spaces with high indoor air requirements. Relevant environmental indicators are subject to the test reports of the corresponding products.

What is the typical lead time?

Conventional stock specifications have shorter lead times; custom specifications and large-volume orders need to be confirmed according to production scheduling. For engineering orders, it is recommended to lock specifications and quantities at the drawing stage to avoid waiting on site.

How to confirm whether to choose this one or another color pattern in the same series?

It is advisable to also request physical samples of 2–3 candidate color options, compare them under the lighting conditions of the actual space, and then make a decision in combination with the layout effect over a large area. Looking only at a small sample can easily overlook the rhythm of the overall installed surface.

About IGOODS

IGOODS is a manufacturer of flexible stone, soft stone facing and flexible stone-like panels, supplying projects such as indoor and outdoor architectural decoration, commercial decoration and full renovation, hotel and shop renovation, office building renovation, building facades, municipal exterior wall engineering, campus and hospital renovation, old residential community renovation and cultural tourism landscape creation.

The product supports custom specifications, custom textures and custom colors, and can provide large boards, small boards and special-shaped sizes; for export, OEM branding and packaging customization can be done according to customer requirements, and full-container shipping solutions are provided. On the design side, samples and selection support can be provided; on the engineering side, layout and on-site technical coordination can be provided.

From interior walls to building facades, from full commercial interior fit-outs to municipal projects and old city renovation, flexible stone has a relatively wide range of applications. From sampling to batch delivery, the factory handles matters directly and can issue test reports and qualification documents; for engineering projects, layout and on-site technical support are provided, and after-sales is followed up by the technical team.

White new-line stone flexible stone · Supply and Contact

Supplier
Chengdu Igoods Technology Co., Ltd. (IGOODS)
Consultation Hotline
19136341389(same number for phone / WeChat / WhatsApp)
address
No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
Delivery content
Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
Applicable areas
Interior and exterior building wall decoration (not applicable to ground paving)
Product standards
JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
Material scope
Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model

Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.

Contact phone number Product Catalog Free Sample
WeChat ID copied