Black Solid Color Coarse Linear Stone Flexible Stone
Black solid-color coarse-line stone flexible stone is a solid-color flexible stone from IGOODS's line stone with natural texture line. Its main tone is deep black, restrained and understated, with bold vertical line patterns that are deep and strongly textured. It is thin, lightweight, flexible and bendable, suitable for hotel lobbies, commercial spaces, exhibition halls and columns. This page provides specifications and packaging parameters, materials and performance, installation methods and acceptance points, along with applicable scenarios and selection recommendations; free samples and project bulk quotations are supported, and test reports can be provided.
IGOODS source factory products, suitable for hotel, inn, commercial and old city wall engineering projects; supports sample delivery and project quotation.
Product quick information
- Product name:Black Solid Color Coarse Linear Stone Flexible Stone
- Brand: IGOODS
- Product category: Flexible Stone
- Series: Line stone and natural texture
- Craftsmanship: Natural linear stone texture
- Main tone:Deep black tone, calm and restrained
- Texture features:Rugged vertical line texture, with deep, steep lines and a strong sense of texture
- Recommended scenarios:Hotel lobby, commercial spaces, showrooms, columns
- Main applications: Building wall
In IGOODS's linear stone and natural texture, Black Solid Color Coarse Linear Stone Flexible Stone is a style in the "weight and presence" direction. It has a strong sense of linear order, suitable for surfaces where the wall should be read with rhythm and direction; when applied to actual wall surfaces, it can quickly establish a visual center of gravity in large spaces and better set off light-colored elements.
As a relatively new type of wall material, the selection method for flexible stone is different from that of traditional stone. Names vary by region: soft stone, flexible stone, flexible imitation stone panel, and bendable stone basically refer to the same type of product.
The photographed texture characteristics of coarse line stone
In the real photo, the surface of Black Solid-Color Coarse Line Stone Flexible Stone appears in a deep black tone, restrained and composed. Its texture is characterized by "bold vertical line pattern, with deep, sharp lines and a strong texture." The color blocks transition gradually rather than being joined with hard edges, so when installed over large areas, a "patchy" look is unlikely to appear.
The surface response of this color is rather restrained: it does not turn white under strong light, nor does it go flat under weak light, so transitions between areas of different illuminance within the same space are relatively natural.
Under the same series, multiple colors and textures can be combined, making it easy to distinguish main walls from transition walls within the same space, and easier to maintain consistency during large-area installation.
Specifications and packaging parameters
| Specifications (mm) | Thickness (mm) | Approx. weight per panel (kg) | Wooden crate packaging (pieces/crate) | Area of wooden crate after packaging (㎡) | Dimensions after packaging W×L×H (mm) | Weight after packaging approx. (kg) |
|---|---|---|---|---|---|---|
| 1160×2680 | 3.5-4.8 | 24 | 60 | 186.5 | 1260×2780×550 | 1450 |
Optional colors:White, black (other colors customizable)
Packaging notes:Default wooden crate packaging, suitable for long-distance transportation or larger orders; export wooden crates (thicker and sturdier panels) are available for export orders. The above specifications, weights and packaging data are for reference only; the actual order confirmation shall prevail.
Customization notes:Conventional stock is stocked in multiple sizes, and custom large panels, small panels and irregular sizes are supported; stone textures can be customized in directions such as marble veining, granite veining, cultured stone veining, travertine veining, and vintage stone veining, and color, texture and thickness can all be adjusted as needed.
Material and performance parameters
What determines the scope of application of flexible stone is its substrate composition and physical performance. The raw materials are mainly natural minerals, formed with a polymer flexible substrate, and no wood substrate is used, so there is no hidden risk of formaldehyde release. The material is lightweight and flexible, can be bent, and is not prone to cracking or deformation; it also has comprehensive performance including flame retardancy, moisture resistance, stain resistance and UV resistance.
| Project | Parameter description |
|---|---|
| Composition of materials | Composite of natural mineral raw materials and polymer flexible substrate, an inorganic eco-material |
| Fabric process | A stone-imitation decorative surface formed by pressing or printing according to the surface texture of the color |
| Environmental performance | No added formaldehyde, no asbestos, meeting conventional environmental requirements for home and commercial decoration |
| Combustion performance | Flame retardant; the specific combustion performance grade shall be subject to the valid test report of the selected model. |
| Waterproof and moisture-proof | The material does not absorb water, and after construction the wall is less prone to dampness and mold |
| Mildew resistance | Can be used in humid environments and underground spaces, with daily maintenance mainly by wiping |
| UV resistance and weather resistance | Has UV resistance, high and low temperature resistance and weathering resistance, and can be used for exterior facades. |
| Anti-cracking | Flexible base material can absorb the micro deformation of the base, and the surface is not easy to appear fine cracks |
| Can be bent | The sheet material has certain flexibility and can be bent within a certain radius; the specific radius is determined by the model and base conditions |
| Bonding method | Full-bed adhesion is recommended for installation; select adhesive according to product instructions; weather-resistant adhesive is required outdoors |
| Stain resistance and cleaning | The surface is dense and not prone to retaining dirt; for daily cleaning, simply wipe with water or a neutral cleaner |
| Implementation standards | JG/T 540-2017"Flexible Stone-like Facing Materials for Buildings" |
| Customizable item | Texture direction, color, texture, thickness, specifications and dimensions, and packaging method |
| Sample specifications | Physical samples can be provided for design material selection and texture confirmation |
The performance descriptions in the table above are based on the general characteristics of the flexible stone category. For this specific product, black solid-color coarse line stone flexible stone, engineering technical parameters such as combustion performance, weather resistance indicators, and radioactivity must be based on the valid test report for the corresponding model.
Key installation and construction points
This material has relatively relaxed requirements for construction conditions: no keel or complex substrate is needed, and after leveling it can be installed on the wall, either dry-bonded or wet-bonded.
Substrate treatment
Before construction, confirm that the substrate is solid, clean, and free of obvious dusting and oil stains. If the original wall has a coating, check its adhesion strength; areas with poor adhesion should be removed first. When directly covering an old finish, ensure that the original finish itself bonds reliably.
Measurement and layout
At the measurement stage, it is advisable to put the layout drawing on paper before starting work: mark the positions of door and window openings, switches and sockets, and internal and external corners, and calculate the space occupied by trim strips in advance. Within the same space, try to align the seams on different wall surfaces; this makes a big difference to the overall look.
Cutting and hole drilling
Can be scored multiple times with a utility knife and a straightedge and then snapped, or processed with a cutting machine; openings for switch panels, access panels and similar locations should be cut to actual dimensions, leaving a small allowance at the opening edge before trimming. Flexible stone is easy to cut on site and does not require prefabrication.
Pasting installation
Full-bed adhesion is recommended for installation; prepare adhesive according to product instructions, with spread thickness and notch profile determined by the selected specification. During application, press from one side toward the other to expel air, which can significantly improve bonding reliability.
Compaction and adjustment
After each piece of material is installed on the wall, press it firmly with a roller or soft pad, and check whether the edges and corners are lifting. If a position deviation is found, adjust it as soon as possible; once the adhesive begins to set, it should not be moved again. Where the wall surface is uneven, the pressing time can be appropriately increased.
Edge finishing and acceptance
For internal and external corners, closures and junctions between different materials, same-color edge trim and internal/external corner strips are recommended. Exterior wall projects should have dividing joints and sealing done according to standards; after completion, check joint flatness, overall color difference and facade verticality.
What commercial spaces is Black Solid-Color Coarse-Line Stone Flexible Stone suitable for?
Based on the texture characteristics of this pattern and common project types, it more often appears in the following types of locations.
Hotel public areas
In hotel lobbies, corridors and lounge areas, the material must satisfy both "visually enduring" and "walkably durable" conditions. This type of texture has detail when observed up close, yet at a distance it can maintain the uniformity of the entire wall, without overpowering the furnishings and lighting due to excessive pattern strength.
Commercial storefronts and street blocks
Retail and street-block project interfaces must attract attention while withstanding long-term use. These material surfaces are stain-resistant and fade-resistant, suitable for storefront interiors, main in-store walls, and pedestrian circulation areas.
Brand showroom
Showrooms often need to complete multiple theme changes within the same space, and the wall as a fixed interface needs to be sufficiently enduring. This type of material has neutral tones, so when soft furnishings and lighting are changed, the wall does not need to be touched.
Columns and irregular shapes
Columns, door frames, and irregular shapes are the hardest positions to handle with traditional hard stone. Flexible stone can be bent and wrapped to reduce the number of seams, turning positions that originally required multiple pieces into a single continuous sheet.
What product features does Black Solid-Color Coarse-Line Stone Flexible Stone have?
- Lightweight dead weight: Panel thickness is commonly 2.3–9mm, and the weight per piece is far lower than natural stone of the same area, so the requirements on wall load-bearing and substrate structure are correspondingly reduced.
- Flexible and bendable: Has a certain bending capability and can conform to curved surfaces and irregular substrates; for specific curved projects, it is recommended to make a sample first to confirm the bending radius.
- No substrate preparation required for installation: It does not rely on a framing system; after the substrate is leveled, it is applied directly to the wall, giving greater flexibility in scheduling and labor organization.
- Texture customizable: Stone texture direction can be customized to marble vein, granite vein, cultured stone texture, travertine texture, vintage stone texture, etc.; color, texture, and thickness can all be adjusted according to project requirements.
- Old walls can be directly covered: Suitable for secondary renovation of existing walls: no need to demolish down to the substrate, which is friendlier for commercial spaces in operation and occupied residences.
- Convenient on-site cutting: Conventional thickness can be cut with a utility knife and a straightedge through multiple scoring passes; irregular shapes and openings are trimmed on site, with no need for prefabrication and secondary transport.
Project selection and procurement key points for Black Solid-Color Coarse-Line Stone Flexible Stone
Architectural designers, landscape designers, and commercial interior designers working indoors and outdoors usually pay more attention at the material selection stage to the realism of the stone imitation effect, the naturalness of the veining, and how well the material matches the spatial style. For such projects, the value of flexible stone is not just "looking like stone," but freeing the material from weight and shaping constraints while retaining the visual language of stone.
Panels can achieve different surface effects such as deep and light textures, matte and natural cut surfaces, and color and grain can also be adjusted according to the design direction; the gap between the look at drawing stage and the actual scene is relatively controllable, reducing on-site failures.
Procurement demand is geographically widespread: local projects value response speed, while cross-regional projects place more emphasis on bulk supply and production scheduling capability.
At the design stage, designers usually compare several approaches at the same time—stone-look flexible panels, ultra-thin flexible stone and bendable exterior wall stone—and then make trade-offs based on the difficulty of the shape.
Frequently Asked Questions about Black Solid-Color Coarse-Line Stone Flexible Stone
Can construction be done directly on an old wall?
Yes. Flexible stone requires no keel and no complicated substrate preparation; when the flatness of the original finish meets requirements, it can be applied directly as an overlay. If flatness is insufficient, it is recommended to level or repair locally first. Renovation of old houses does not require large-scale removal of the original wall.
Is there a fire rating?
The product has flame-retardant performance; the specific combustion performance rating is subject to the valid test report for the selected model. For public building projects with clear fire protection requirements, it is recommended to directly request the test documents for the corresponding batch at the selection stage.
How much material does a project roughly need?
It is advisable to estimate based on the actual layout area plus a 5%–8% waste allowance. Flexible stone can be bent and cut, and waste at irregular positions will be slightly higher than for flat installation. For the specific quantity, drawings can be provided and the manufacturer can assist with the calculation.
Is there support for engineering bulk procurement?
Yes. IGOODS supports project bulk supply, expedited production scheduling, and on-site technical coordination. Specifications and textures can be customized according to project drawings, and documents such as test reports can be provided to assist the client and supervisor with acceptance.
About IGOODS
IGOODS is a source manufacturer of flexible stone and wood veneer wall panels, with a product line covering flexible stone-like facing, soft stone facing, bendable stone and other architectural wall materials, serving high-end interior design, commercial decoration and full renovation, foreign trade export orders and large-scale building exterior wall renovation.
Flexible stone is one of our factory's core product systems. Products are not resold through intermediaries, and custom specifications, custom textures, and custom colors are supported. The focus is on solving industry pain points such as traditional stone being heavy, prone to falling off, high in cost, limited in construction, and difficult to file for exterior wall use.
The application scope covers indoor and outdoor architectural decoration, full-package commercial fit-out, hotel and shop renovation, office building renovation, residential building facades, municipal exterior wall projects, campus and hospital renovation, old residential community renovation and cultural tourism landscape construction. Our factory is a source manufacturer and can provide physical samples, customization according to drawings and preferential pricing solutions for engineering batches; foreign trade orders are supplied with customs declaration documents and test reports, with nationwide shipping.
Black Solid Color Coarse Linear Stone Flexible Stone · Supply and Contact
- Supplier
- Chengdu Igoods Technology Co., Ltd. (IGOODS)
- Consultation Hotline
- 19136341389(same number for phone / WeChat / WhatsApp)
- 19136341389@163.com
- address
- No. 9001, 9th Floor, Building A, No. 166 Laifeng 5th Road, Wuhou District, Chengdu, Sichuan Province, China (Laifeng Digital Innovation Center)
- Delivery content
- Free sample · Drawing and specification customization · Engineering bulk supply · National shipping · After-sales technical support
- Applicable areas
- Interior and exterior building wall decoration (not applicable to ground paving)
- Product standards
- JG/T 540-2017 'Building Flexible Stone-faced Decorative Material'
- Material scope
- Specifications and weight are for reference; combustion performance and environmental grade are subject to the valid test report for the selected model
Data specifications:This page's unit of measurement is millimeters (mm), weight is kilograms per square meter (kg/㎡), and the base levelness is 2m gap value with a ruler; The thickness and self-weight are value ranges distinguished according to the series and texture depth, which are not equal to the performance commitment of a single model, and the actual value is confirmed by the corresponding model specification, inspection report, and order. The numbers for area, consumption, and project period are calculated according to the industry level, used for estimation, and do not constitute a quotation commitment. Please provide area, color, and delivery location for project quotation.